Push bumper
Push bumper
08-27-2010, 02:08 PM
#46
(08-27-2010, 12:47 PM)dropnosky well, it turned out pretty nice I think. I only had to make two tiny angle iron brackets for the top, and the brackets this thing uses to bolt to the F-150 bumper actually worked perfectly below, almost as if it was made for it.
Looks Great!
(08-27-2010, 12:47 PM)dropnosky Now I just have to find a skid plate, maybe off a toyota truck to continue underneath and adapt it to protect the oil pan and radiator. It can probably continue from right where the push bumper ends.
Yes! I want one two! hehe ... too! Here is my thought... Make a plate just a tad wider than the oil pan and run it straight back from the bumper to under the pan, bolt right there at cross member behind engine oil pan, continue under trans and bolt up to trans cross member, continue just past rear diff with a lip at the end to protect diff housing. Yes it will be heavy but EVERYTHING will be protected... Also make some steering linkage protection as well cuz that shit seems like it will snap if you look at it the wrong way
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
08-27-2010, 02:08 PM #46(08-27-2010, 12:47 PM)dropnosky well, it turned out pretty nice I think. I only had to make two tiny angle iron brackets for the top, and the brackets this thing uses to bolt to the F-150 bumper actually worked perfectly below, almost as if it was made for it.
Looks Great!
(08-27-2010, 12:47 PM)dropnosky Now I just have to find a skid plate, maybe off a toyota truck to continue underneath and adapt it to protect the oil pan and radiator. It can probably continue from right where the push bumper ends.
Yes! I want one two! hehe ... too! Here is my thought... Make a plate just a tad wider than the oil pan and run it straight back from the bumper to under the pan, bolt right there at cross member behind engine oil pan, continue under trans and bolt up to trans cross member, continue just past rear diff with a lip at the end to protect diff housing. Yes it will be heavy but EVERYTHING will be protected... Also make some steering linkage protection as well cuz that shit seems like it will snap if you look at it the wrong way
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Messages In This Thread
Push bumper - by dropnosky - 05-14-2010, 09:36 AM
RE: Push bumper - by MB TECH - 05-14-2010, 10:26 AM
RE: Push bumper - by Kozuka - 05-14-2010, 11:16 AM
RE: Push bumper - by dropnosky - 05-14-2010, 03:18 PM
RE: Push bumper - by dropnosky - 05-14-2010, 05:01 PM
RE: Push bumper - by ForcedInduction - 05-14-2010, 05:15 PM
RE: Push bumper - by BriZZell Dride - 09-04-2010, 10:59 PM
RE: Push bumper - by dropnosky - 05-14-2010, 05:18 PM
RE: Push bumper - by Kozuka - 05-14-2010, 06:33 PM
RE: Push bumper - by dropnosky - 05-14-2010, 07:47 PM
RE: Push bumper - by Kozuka - 05-14-2010, 07:53 PM
RE: Push bumper - by DeliveryValve - 05-15-2010, 10:10 AM
RE: Push bumper - by dropnosky - 05-15-2010, 11:40 AM
RE: Push bumper - by Nick - 05-16-2010, 12:42 AM
RE: Push bumper - by dropnosky - 05-18-2010, 10:48 PM
RE: Push bumper - by garage - 05-19-2010, 10:42 AM
RE: Push bumper - by DeliveryValve - 05-19-2010, 12:42 PM
RE: Push bumper - by garage - 05-19-2010, 03:21 PM
RE: Push bumper - by ForcedInduction - 05-19-2010, 05:05 PM
RE: Push bumper - by GREASY_BEAST - 05-20-2010, 05:25 PM
RE: Push bumper - by dropnosky - 05-21-2010, 02:42 PM
RE: Push bumper - by winmutt - 05-26-2010, 09:18 AM
RE: Push bumper - by dropnosky - 05-26-2010, 03:40 PM
RE: Push bumper - by mike-81-240d - 07-15-2010, 02:55 AM
RE: Push bumper - by dropnosky - 07-15-2010, 08:29 AM
RE: Push bumper - by mike-81-240d - 07-15-2010, 11:13 AM
RE: Push bumper - by dropnosky - 07-15-2010, 11:38 AM
RE: Push bumper - by mike-81-240d - 07-15-2010, 10:37 PM
RE: Push bumper - by dropnosky - 07-21-2010, 07:01 AM
RE: Push bumper - by mike-81-240d - 07-16-2010, 12:08 AM
RE: Push bumper - by garage - 07-18-2010, 06:22 PM
RE: Push bumper - by winmutt - 07-19-2010, 08:12 AM
RE: Push bumper - by garage - 07-19-2010, 12:42 PM
RE: Push bumper - by mike-81-240d - 07-19-2010, 03:17 PM
RE: Push bumper - by garage - 07-19-2010, 05:43 PM
RE: Push bumper - by mike-81-240d - 07-21-2010, 01:37 AM
RE: Push bumper - by garage - 07-24-2010, 12:37 AM
RE: Push bumper - by dropnosky - 07-24-2010, 09:03 AM
RE: Push bumper - by garage - 07-24-2010, 09:50 AM
RE: Push bumper - by dropnosky - 07-24-2010, 10:05 AM
RE: Push bumper - by garage - 07-24-2010, 10:16 AM
RE: Push bumper - by dropnosky - 07-24-2010, 10:21 AM
RE: Push bumper - by garage - 07-24-2010, 10:58 AM
RE: Push bumper - by dropnosky - 07-24-2010, 12:20 PM
RE: Push bumper - by mike-81-240d - 07-26-2010, 01:26 PM
RE: Push bumper - by dropnosky - 08-27-2010, 12:47 PM
RE: Push bumper - by Captain America - 08-27-2010, 02:08 PM
RE: Push bumper - by stan - 08-28-2010, 02:58 PM
RE: Push bumper - by garage - 09-14-2010, 09:40 AM
RE: Push bumper - by dropnosky - 09-15-2010, 08:35 AM
RE: Push bumper - by Captain America - 09-14-2010, 06:19 PM
RE: Push bumper - by garage - 09-14-2010, 10:25 PM
RE: Push bumper - by Captain America - 09-15-2010, 12:16 AM
RE: Push bumper - by garage - 09-15-2010, 06:39 PM
RE: Push bumper - by dropnosky - 10-24-2010, 01:02 PM
RE: Push bumper - by garage - 10-24-2010, 05:03 PM
RE: Push bumper - by smoke026 - 08-31-2011, 08:50 AM
RE: Push bumper - by dropnosky - 08-31-2011, 11:39 AM
RE: Push bumper - by 300D50 - 10-25-2010, 11:05 PM
RE: Push bumper - by mike-81-240d - 10-28-2010, 10:09 PM
RE: Push bumper - by winmutt - 12-21-2010, 10:23 AM
RE: Push bumper - by ForcedInduction - 12-21-2010, 10:46 AM
RE: Push bumper - by sassparilla_kid - 12-30-2013, 01:45 PM
RE: Push bumper - by lgreeley83 - 01-02-2014, 04:11 PM
RE: Push bumper - by sassparilla_kid - 01-04-2014, 03:46 PM
RE: Push bumper - by lgreeley83 - 01-04-2014, 03:53 PM
RE: Push bumper - by epowers777 - 10-26-2014, 12:14 AM
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)