Offsets

STD Tuning Body Mods Offsets

Offsets

View a Printable Version

0 Vote(s) - 0 Average

BenE67

Unregistered

15

04-14-2010, 10:44 PM #1

Experts;

I "would like" to upgrade my tires and run either 16"x8" or 17"x8" on my car. I know fender rolling may be required, but what offset would be OK in both cases.

BenE67

04-14-2010, 10:44 PM #1

Experts;

I "would like" to upgrade my tires and run either 16"x8" or 17"x8" on my car. I know fender rolling may be required, but what offset would be OK in both cases.

winmutt

bitbanger

3,468

04-19-2010, 02:38 PM #2

I have 15x7.5 in the front/back with et25 and it rubs a bit in the corners, had to add 3mm shims to get clearance. I had another set of et25 that wouldnt even rotate so ymmv.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt

04-19-2010, 02:38 PM #2

I have 15x7.5 in the front/back with et25 and it rubs a bit in the corners, had to add 3mm shims to get clearance. I had another set of et25 that wouldnt even rotate so ymmv.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

mdkg67
Unregistered

04-20-2010, 06:36 PM #3

found this site pretty helpful for comparing different tire/wheel options, not sure if it has been mentioned here before

http://www.rimsntires.com/rt_specs.jsp

mdkg67

04-20-2010, 06:36 PM #3

found this site pretty helpful for comparing different tire/wheel options, not sure if it has been mentioned here before

http://www.rimsntires.com/rt_specs.jsp

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
1 Guest(s)