Race prepping a W123
Race prepping a W123
We are getting pretty close to having a running car. A buddy of mine was able to construct a key for the car using one of the lock cylinders. Key works, but the car is still not ready to crank. I believe we wired the starter backwards when we were putting it back on. The shifter and shortened linkage is in place.
We found a person near by who can modify the aluminum intake to accomodate the intercooler. The rollcage pieces should get delivered today. Hopefully, we knock out both of those tasks this weekend.
The master brake cylinder needs to go in and the rotors need to be cut/new pads installed. After that, we should be ready!