M vs MW pump

STD Tuning Engine M vs MW pump

M vs MW pump

View a Printable Version

0 Vote(s) - 0 Average

~~ForcedInduction~~

Banned

3,628

01-16-2010, 06:41 PM #7

I wouldn't bother with 6mm elements. Its only enough to support around 180hp and even then you're back to the "injection takes too long" problem the 5.5mm elements have at 145hp.

ForcedInduction

01-16-2010, 06:41 PM #7

I wouldn't bother with 6mm elements. Its only enough to support around 180hp and even then you're back to the "injection takes too long" problem the 5.5mm elements have at 145hp.

View a Printable Version

0 Vote(s) - 0 Average

Messages In This Thread

M vs MW pump - by kmaser - 01-14-2010, 09:23 PM

RE: M vs MW pump - by ForcedInduction - 01-15-2010, 07:03 AM

RE: M vs MW pump - by tomnik - 01-15-2010, 02:08 PM

RE: M vs MW pump - by kmaser - 01-15-2010, 05:19 PM

RE: M vs MW pump - by tomnik - 01-16-2010, 01:53 AM

RE: M vs MW pump - by kmaser - 01-16-2010, 03:37 PM

RE: M vs MW pump - by ForcedInduction - 01-16-2010, 06:41 PM

RE: M vs MW pump - by tomnik - 01-17-2010, 03:43 AM

RE: M vs MW pump - by kmaser - 01-17-2010, 11:33 PM

Users browsing this thread: