STD Other FS / WTB / Buying guides Craiglist alert thread

Craiglist alert thread

Craiglist alert thread

 
  • 3 Vote(s) - 4 Average
 
Pages (11): Previous 1 5 6 7 8 9 11 Next  
DeliveryValve
Superturbo

1,338
06-23-2012, 09:36 AM #301
BBS or BBS type basket weave wheels 15x7 - $300

http://westernmass.craigslist.org/pts/3003149417.html



.

Gota love Mercedes Diesels!



.
DeliveryValve
06-23-2012, 09:36 AM #301

BBS or BBS type basket weave wheels 15x7 - $300

http://westernmass.craigslist.org/pts/3003149417.html



.


Gota love Mercedes Diesels!



.

willbhere4u
Six in a row make her go!

2,507
06-25-2012, 04:27 PM #302
1962 INTERNATIONAL GRANDAM

http://knoxville.craigslist.org/cto/3091802234.html

http://autos.yahoo.com/blogs/motoramic/s...56762.html
This post was last modified: 06-25-2012, 04:28 PM by willbhere4u.
Attached Files
Image(s)
   

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
06-25-2012, 04:27 PM #302

1962 INTERNATIONAL GRANDAM

http://knoxville.craigslist.org/cto/3091802234.html

http://autos.yahoo.com/blogs/motoramic/s...56762.html

Attached Files
Image(s)
   

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

larsalan
Superturbo

1,272
06-25-2012, 04:52 PM #303
chop the top off those rear seats and you're almost ready for paint.

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
06-25-2012, 04:52 PM #303

chop the top off those rear seats and you're almost ready for paint.


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

willbhere4u
Six in a row make her go!

2,507
06-25-2012, 05:29 PM #304
for sale 1962 international truckcar, has every optional that a car could have ,has frontwheel drive driveline disk brakes all around , has air bags that are in working order has oldsmobile dash with tilt cruise , power seats , air -did work but i low of freon due from setting -can drive it anywhere, every light works as well as new cab lights allready has grandam door handles installed and work great, has alloy wheels and this truck has a good title which is titled as a international, has a grand am rear with the original duel exhaust, car is fuel injected and there are no check engine lights on?everthing is in working order but the aircondition is low of freon call if interested to much to list lots of time put in this car , have to many other projects to ,do so call 606 456 7738 -no emails please -price is firm -have probly twice as much invested .-this vehicle will be sold where is as is...thanks
This post was last modified: 06-25-2012, 05:32 PM by willbhere4u.
Attached Files
Image(s)
               

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
06-25-2012, 05:29 PM #304

for sale 1962 international truckcar, has every optional that a car could have ,has frontwheel drive driveline disk brakes all around , has air bags that are in working order has oldsmobile dash with tilt cruise , power seats , air -did work but i low of freon due from setting -can drive it anywhere, every light works as well as new cab lights allready has grandam door handles installed and work great, has alloy wheels and this truck has a good title which is titled as a international, has a grand am rear with the original duel exhaust, car is fuel injected and there are no check engine lights on?everthing is in working order but the aircondition is low of freon call if interested to much to list lots of time put in this car , have to many other projects to ,do so call 606 456 7738 -no emails please -price is firm -have probly twice as much invested .-this vehicle will be sold where is as is...thanks

Attached Files
Image(s)
               

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

sassparilla_kid
diesel > all other fuels

1,618
06-26-2012, 10:47 PM #305
all kindsa sheeeeeyit

http://fresno.craigslist.org/cto/3098703187.html

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
06-26-2012, 10:47 PM #305

all kindsa sheeeeeyit

http://fresno.craigslist.org/cto/3098703187.html


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

DeliveryValve
Superturbo

1,338
06-27-2012, 05:56 AM #306
Cheap w123 - 300 dollars.

http://bakersfield.craigslist.org/fod/3103271075.html



.

Gota love Mercedes Diesels!



.
DeliveryValve
06-27-2012, 05:56 AM #306

Cheap w123 - 300 dollars.

http://bakersfield.craigslist.org/fod/3103271075.html



.


Gota love Mercedes Diesels!



.

Kozuka
I'm_Badass

334
06-30-2012, 04:17 PM #307
(06-26-2012, 10:47 PM)sassparilla_kid all kindsa sheeeeeyit

http://fresno.craigslist.org/cto/3098703187.html

Damn, this guy has a real evo 2 factory body kit.

1983 300TD : 4 Speed : SLS Delete : More. Daily Deathcab
1987 190E/16v/OM603 : 5 Speed : SLS Delete : Lots More..W201 Project
Kozuka
06-30-2012, 04:17 PM #307

(06-26-2012, 10:47 PM)sassparilla_kid all kindsa sheeeeeyit

http://fresno.craigslist.org/cto/3098703187.html

Damn, this guy has a real evo 2 factory body kit.


1983 300TD : 4 Speed : SLS Delete : More. Daily Deathcab
1987 190E/16v/OM603 : 5 Speed : SLS Delete : Lots More..W201 Project

DeliveryValve
Superturbo

1,338
07-04-2012, 01:36 AM #308
Ronal R9 wheels.

http://cnj.craigslist.org/pts/3116830824.html

[Image: 5Lf5Gc5H23Ga3F63Hac73937bb6c9a13b19dc.jpg]



.
This post was last modified: 07-04-2012, 01:36 AM by DeliveryValve.

Gota love Mercedes Diesels!



.
DeliveryValve
07-04-2012, 01:36 AM #308

Ronal R9 wheels.

http://cnj.craigslist.org/pts/3116830824.html

[Image: 5Lf5Gc5H23Ga3F63Hac73937bb6c9a13b19dc.jpg]



.


Gota love Mercedes Diesels!



.

DeliveryValve
Superturbo

1,338
07-04-2012, 08:54 AM #309
Not a diesel, but a Chevy 454 powered CD or CE.

http://asheville.craigslist.org/cto/3086711858.html



.

Gota love Mercedes Diesels!



.
DeliveryValve
07-04-2012, 08:54 AM #309

Not a diesel, but a Chevy 454 powered CD or CE.

http://asheville.craigslist.org/cto/3086711858.html



.


Gota love Mercedes Diesels!



.

sassparilla_kid
diesel > all other fuels

1,618
07-04-2012, 04:52 PM #310
(07-04-2012, 08:54 AM)DeliveryValve Not a diesel, but a Chevy 454 powered CD or CE.

http://asheville.craigslist.org/cto/3086711858.html



.

It has euro bumpers and a front spoiler to boot!

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
07-04-2012, 04:52 PM #310

(07-04-2012, 08:54 AM)DeliveryValve Not a diesel, but a Chevy 454 powered CD or CE.

http://asheville.craigslist.org/cto/3086711858.html



.

It has euro bumpers and a front spoiler to boot!


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

serverman777
GT2559V

226
07-16-2012, 10:17 PM #311
http://bloomington.craigslist.org/cto/3138793263.html

Seen this thing at a car show a few months back... CRAZY ASS SHIT!!

'84 300 SD w126 Race Car Wink
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
07-16-2012, 10:17 PM #311

http://bloomington.craigslist.org/cto/3138793263.html

Seen this thing at a car show a few months back... CRAZY ASS SHIT!!


'84 300 SD w126 Race Car Wink
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver

willbhere4u
Six in a row make her go!

2,507
07-19-2012, 09:20 AM #312
I am selling my 1980 240d turbo if any one is interested it still needs a bit of work but runs and drives

all of the suspension and brakes have been rebuilt with Bilstine HD shocks and w126 vented brakes and more. It has power windows and a manual sunroof working CD player and heater but the AC compressor is missing it has the Rajay turbo kit and 4spd manual transmission

I'm hoping to get $1500 obo towards the down payment of my first home. This car has had a lot of work done to it but needs some metal patches on the LH front by the rocker/foot well other than that it is a very solid car

http://denver.craigslist.org/cto/3145831072.html

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
07-19-2012, 09:20 AM #312

I am selling my 1980 240d turbo if any one is interested it still needs a bit of work but runs and drives

all of the suspension and brakes have been rebuilt with Bilstine HD shocks and w126 vented brakes and more. It has power windows and a manual sunroof working CD player and heater but the AC compressor is missing it has the Rajay turbo kit and 4spd manual transmission

I'm hoping to get $1500 obo towards the down payment of my first home. This car has had a lot of work done to it but needs some metal patches on the LH front by the rocker/foot well other than that it is a very solid car

http://denver.craigslist.org/cto/3145831072.html


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

serverman777
GT2559V

226
08-03-2012, 12:49 PM #313
http://bloomington.craigslist.org/pts/3181569642.html
Look Its my car!

'84 300 SD w126 Race Car Wink
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
08-03-2012, 12:49 PM #313

http://bloomington.craigslist.org/pts/3181569642.html
Look Its my car!


'84 300 SD w126 Race Car Wink
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver

DeliveryValve
Superturbo

1,338
08-27-2012, 12:01 AM #314
Somebody in New York or near that area needs to snatch up this 300D if indeed it's a 5 speed...

http://catskills.craigslist.org/cto/3226130880.html



.

Gota love Mercedes Diesels!



.
DeliveryValve
08-27-2012, 12:01 AM #314

Somebody in New York or near that area needs to snatch up this 300D if indeed it's a 5 speed...

http://catskills.craigslist.org/cto/3226130880.html



.


Gota love Mercedes Diesels!



.

JustPassinThru
W123 and W124

491
08-27-2012, 12:25 AM #315
Holset HX35w $500, no affiliation with the seller. Looks clean in the pix:

http://seattle.craigslist.org/see/pts/3206668352.html

Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
08-27-2012, 12:25 AM #315

Holset HX35w $500, no affiliation with the seller. Looks clean in the pix:

http://seattle.craigslist.org/see/pts/3206668352.html


Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).

garage
Bush Taxi

893
08-27-2012, 11:36 PM #316
I want this..

http://losangeles.craigslist.org/sfv/cto...40115.html

1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
garage
08-27-2012, 11:36 PM #316

I want this..

http://losangeles.craigslist.org/sfv/cto...40115.html


1987 300D: EGR Delete, ARV Delete, Cold Air Intake...

willbhere4u
Six in a row make her go!

2,507
08-28-2012, 09:49 AM #317
euro 280se 5spd not a 380se http://denver.craigslist.org/cto/3233953705.html

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
08-28-2012, 09:49 AM #317

euro 280se 5spd not a 380se http://denver.craigslist.org/cto/3233953705.html


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

DeliveryValve
Superturbo

1,338
08-28-2012, 11:36 AM #318
(08-28-2012, 09:49 AM)willbhere4u euro 280se 5spd not a 380se http://denver.craigslist.org/cto/3233953705.html

That's hot!

I also dig this fella's other vehicle.


.
Attached Files
Image(s)
       

Gota love Mercedes Diesels!



.
DeliveryValve
08-28-2012, 11:36 AM #318

(08-28-2012, 09:49 AM)willbhere4u euro 280se 5spd not a 380se http://denver.craigslist.org/cto/3233953705.html

That's hot!

I also dig this fella's other vehicle.


.

Attached Files
Image(s)
       

Gota love Mercedes Diesels!



.

winmutt
bitbanger

3,468
08-28-2012, 05:01 PM #319
Man that's a great looking car.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
08-28-2012, 05:01 PM #319

Man that's a great looking car.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

willbhere4u
Six in a row make her go!

2,507
08-29-2012, 02:27 PM #320
190 2.3-16 valve cosworth dog leg 5spd http://denver.craigslist.org/cto/3237442690.html
This post was last modified: 08-29-2012, 02:29 PM by willbhere4u.
Attached Files
Image(s)
       

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
08-29-2012, 02:27 PM #320

190 2.3-16 valve cosworth dog leg 5spd http://denver.craigslist.org/cto/3237442690.html

Attached Files
Image(s)
       

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

willbhere4u
Six in a row make her go!

2,507
09-02-2012, 10:18 PM #321
190d camper

http://cgi.ebay.com/ebaymotors/1964-Merc...1c2ad8c129

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
09-02-2012, 10:18 PM #321

190d camper

http://cgi.ebay.com/ebaymotors/1964-Merc...1c2ad8c129


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

winmutt
bitbanger

3,468
10-12-2012, 01:53 AM #322
http://atlanta.craigslist.org/nat/pts/3306278322.html CLK wheels for $100

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
10-12-2012, 01:53 AM #322

http://atlanta.craigslist.org/nat/pts/3306278322.html CLK wheels for $100


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

Simpler=Better
PORTED HEAD

2,127
10-12-2012, 11:16 AM #323
CRD4x4 found this one:
http://baltimore.craigslist.org/cto/3217513676.html

Homemade 300T pickup conversion. I don't have the space or time...although it's a wild concept. Went and checked it out.

Simpler=Better It turned out to be pretty rusty-the welded on passenger doors had been rusting out on the bottom, and into the wheel well.

The rear windows and corners are from a K car, and there was some cracking in the paint...which makes me think of flexing.

Driver's seat belts and rear seat mount bolts weren't bolted in due to a PO's hackjob floor pan repair. Legroom is surprisingly large-the cabin was made with the seat all the way back and slightly reclined.

SLS was squatting and described as "sticky"-it apparently will start working if you drive around for half an hour or so.

We jumped the car from his truck, it started up really well. Cold engine, 65* ambient. Fired on all 5. Rotted exhaust

Minor transmission slip-the classic 1-2 flare and short shift into 4th. Actually held the gears better than most 123's I've test driven.

The tailgate was a chopped up back hatch, and is removable. Looks good, a little loose. Not hinged, but it kinda sets down into the bed and is held in place with the sliding door locks you find in a bathroom stall. The bed is made of sheetl steel on unknown thickness. When he walked on it to demo it did bow ever so slightly.

It looked like a beautiful build, once upon a time. I'm going to see if my brother wants it-he has a lift and all the goodies. I'm stuck in apartment land so there's no hope of doing bodywork.


See photos below:

[Image: truck2k.jpg]

[Image: truck1ip.jpg]

[Image: passengerrearwheelwell.jpg]

[Image: driverrearwheel.jpg]

[Image: bpillar.jpg]
This post was last modified: 10-12-2012, 11:17 AM by Simpler=Better.

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-12-2012, 11:16 AM #323

CRD4x4 found this one:
http://baltimore.craigslist.org/cto/3217513676.html

Homemade 300T pickup conversion. I don't have the space or time...although it's a wild concept. Went and checked it out.

Simpler=Better It turned out to be pretty rusty-the welded on passenger doors had been rusting out on the bottom, and into the wheel well.

The rear windows and corners are from a K car, and there was some cracking in the paint...which makes me think of flexing.

Driver's seat belts and rear seat mount bolts weren't bolted in due to a PO's hackjob floor pan repair. Legroom is surprisingly large-the cabin was made with the seat all the way back and slightly reclined.

SLS was squatting and described as "sticky"-it apparently will start working if you drive around for half an hour or so.

We jumped the car from his truck, it started up really well. Cold engine, 65* ambient. Fired on all 5. Rotted exhaust

Minor transmission slip-the classic 1-2 flare and short shift into 4th. Actually held the gears better than most 123's I've test driven.

The tailgate was a chopped up back hatch, and is removable. Looks good, a little loose. Not hinged, but it kinda sets down into the bed and is held in place with the sliding door locks you find in a bathroom stall. The bed is made of sheetl steel on unknown thickness. When he walked on it to demo it did bow ever so slightly.

It looked like a beautiful build, once upon a time. I'm going to see if my brother wants it-he has a lift and all the goodies. I'm stuck in apartment land so there's no hope of doing bodywork.


See photos below:

[Image: truck2k.jpg]

[Image: truck1ip.jpg]

[Image: passengerrearwheelwell.jpg]

[Image: driverrearwheel.jpg]

[Image: bpillar.jpg]


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

JustPassinThru
W123 and W124

491
10-13-2012, 01:33 AM #324
Four AMG rims with Pirelli tires, front two are 8.5/18s the back two are 9.5/18, about two hours north of me:

http://seattle.craigslist.org/sno/pts/3334124893.html

Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
10-13-2012, 01:33 AM #324

Four AMG rims with Pirelli tires, front two are 8.5/18s the back two are 9.5/18, about two hours north of me:

http://seattle.craigslist.org/sno/pts/3334124893.html


Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).

sassparilla_kid
diesel > all other fuels

1,618
10-21-2012, 11:57 PM #325
Can somebody please tell me if this is a good deal and whether or not I should buy it so I can stop looking at the ad every time I search craigslist 1963 190D FINTAIL!!!!!

http://fresno.craigslist.org/cto/3231739127.html

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
10-21-2012, 11:57 PM #325

Can somebody please tell me if this is a good deal and whether or not I should buy it so I can stop looking at the ad every time I search craigslist 1963 190D FINTAIL!!!!!

http://fresno.craigslist.org/cto/3231739127.html


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

DeliveryValve
Superturbo

1,338
10-22-2012, 04:11 AM #326
^^^ That looks like a good deal. If I had room, I'd consider it!
You should check it out.

.

Gota love Mercedes Diesels!



.
DeliveryValve
10-22-2012, 04:11 AM #326

^^^ That looks like a good deal. If I had room, I'd consider it!
You should check it out.

.


Gota love Mercedes Diesels!



.

sassparilla_kid
diesel > all other fuels

1,618
10-22-2012, 02:02 PM #327
I'll call this week some time. I would need to get rid of the parts car to make room though. On the other hand, I would essentially have my 3 dream Mercedes. It is very tempting.....

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
10-22-2012, 02:02 PM #327

I'll call this week some time. I would need to get rid of the parts car to make room though. On the other hand, I would essentially have my 3 dream Mercedes. It is very tempting.....


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

Simpler=Better
PORTED HEAD

2,127
10-22-2012, 02:38 PM #328
Can you stash the parts car somewhere? I've got 5 project vehicles stashed across 2 states. Unrelated: wanna buy a cheap sportbike? Big Grin $$-per-lb/hp it's astronomically cheaper than a Mercedes....gets like 30mpg...

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-22-2012, 02:38 PM #328

Can you stash the parts car somewhere? I've got 5 project vehicles stashed across 2 states. Unrelated: wanna buy a cheap sportbike? Big Grin $$-per-lb/hp it's astronomically cheaper than a Mercedes....gets like 30mpg...


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

sassparilla_kid
diesel > all other fuels

1,618
10-23-2012, 03:43 AM #329
The only reason the parts car is still here is because I haven't taken the engine/trans out yet lol

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
10-23-2012, 03:43 AM #329

The only reason the parts car is still here is because I haven't taken the engine/trans out yet lol


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

SurfRodder
Jackass Extraordinaire

611
10-26-2012, 03:56 PM #330
not mine, but here's an OM601 in the East County San Diego area:

http://sandiego.craigslist.org/csd/pts/3355052678.html

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
10-26-2012, 03:56 PM #330

not mine, but here's an OM601 in the East County San Diego area:

http://sandiego.craigslist.org/csd/pts/3355052678.html


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

winmutt
bitbanger

3,468
10-26-2012, 04:22 PM #331
If this is the real thing.......


http://chicago.craigslist.org/nch/cto/3366107362.html

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
10-26-2012, 04:22 PM #331

If this is the real thing.......


http://chicago.craigslist.org/nch/cto/3366107362.html


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

larsalan
Superturbo

1,272
11-28-2012, 01:10 AM #332
Here's a neat/cheap/clean old gasser
http://indianapolis.craigslist.org/cto/3326244240.html
[Image: 5L75I85G83E13F13leca8f973cd5b80ba1b5f.jpg]

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
11-28-2012, 01:10 AM #332

Here's a neat/cheap/clean old gasser
http://indianapolis.craigslist.org/cto/3326244240.html
[Image: 5L75I85G83E13F13leca8f973cd5b80ba1b5f.jpg]


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

DeliveryValve
Superturbo

1,338
11-29-2012, 12:00 PM #333
(11-28-2012, 01:10 AM)larsalan Here's a neat/cheap/clean old gasser
http://indianapolis.craigslist.org/cto/3326244240.html
[Image: 5L75I85G83E13F13leca8f973cd5b80ba1b5f.jpg]

Now that's a car to get!
BTW - My eyes might be deceived, but they look to me like it has 15 inch bundts. If that's true, that's already worth the purchase price.


.

Gota love Mercedes Diesels!



.
DeliveryValve
11-29-2012, 12:00 PM #333

(11-28-2012, 01:10 AM)larsalan Here's a neat/cheap/clean old gasser
http://indianapolis.craigslist.org/cto/3326244240.html
[Image: 5L75I85G83E13F13leca8f973cd5b80ba1b5f.jpg]

Now that's a car to get!
BTW - My eyes might be deceived, but they look to me like it has 15 inch bundts. If that's true, that's already worth the purchase price.


.


Gota love Mercedes Diesels!



.

larsalan
Superturbo

1,272
11-29-2012, 05:25 PM #334
I'd have that one for sure if I had even close to $1k.
Just seen a wagon here in town too. http://bloomington.craigslist.org/cto/3443114460.html

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
11-29-2012, 05:25 PM #334

I'd have that one for sure if I had even close to $1k.
Just seen a wagon here in town too. http://bloomington.craigslist.org/cto/3443114460.html


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

willbhere4u
Six in a row make her go!

2,507
12-06-2012, 06:41 PM #335
Super rare 1985 BMW 524td turbo diesel $3500 86k

http://denver.craigslist.org/cto/3458634267.html

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
12-06-2012, 06:41 PM #335

Super rare 1985 BMW 524td turbo diesel $3500 86k

http://denver.craigslist.org/cto/3458634267.html


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

willbhere4u
Six in a row make her go!

2,507
12-31-2012, 12:39 PM #336
350 chevy in 240d $1500 http://denver.craigslist.org/cto/3512412322.html

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
12-31-2012, 12:39 PM #336

350 chevy in 240d $1500 http://denver.craigslist.org/cto/3512412322.html


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

larsalan
Superturbo

1,272
01-19-2013, 09:28 PM #337
heres a ok looking w123 in ohio
http://cincinnati.craigslist.org/cto/3546369556.html
dunno why it 'doesnt run' I thought 617 would run no matter what

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
01-19-2013, 09:28 PM #337

heres a ok looking w123 in ohio
http://cincinnati.craigslist.org/cto/3546369556.html
dunno why it 'doesnt run' I thought 617 would run no matter what


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

larsalan
Superturbo

1,272
01-20-2013, 10:44 PM #338
603 in a w124 in indy
http://indianapolis.craigslist.org/cto/3560190137.html

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
01-20-2013, 10:44 PM #338

603 in a w124 in indy
http://indianapolis.craigslist.org/cto/3560190137.html


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

sassparilla_kid
diesel > all other fuels

1,618
01-23-2013, 06:55 PM #339
I may end up getting this

http://fresno.craigslist.org/cto/3563403626.html

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-23-2013, 06:55 PM #339

I may end up getting this

http://fresno.craigslist.org/cto/3563403626.html


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

Bangaway
606 Turbo > Porsche Turbo

129
01-23-2013, 07:36 PM #340
And what are you waiting for?
Bangaway
01-23-2013, 07:36 PM #340

And what are you waiting for?

sassparilla_kid
diesel > all other fuels

1,618
01-23-2013, 09:37 PM #341
(01-23-2013, 07:36 PM)Bangaway And what are you waiting for?

I'm checking it out tomorrow, if it appears to be in good running order and has clean registration, it will be mine by Friday afternoon. The only reason I'm even considering it is because I'll be lucky if the transmission in my w123 lasts another 2 or 3 weeks I think, and I probably won't be able to get my w116 running by then, so in the interim between fixing other cars I will more than likely be driving a 1974 240D

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-23-2013, 09:37 PM #341

(01-23-2013, 07:36 PM)Bangaway And what are you waiting for?

I'm checking it out tomorrow, if it appears to be in good running order and has clean registration, it will be mine by Friday afternoon. The only reason I'm even considering it is because I'll be lucky if the transmission in my w123 lasts another 2 or 3 weeks I think, and I probably won't be able to get my w116 running by then, so in the interim between fixing other cars I will more than likely be driving a 1974 240D


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

Simpler=Better
PORTED HEAD

2,127
01-24-2013, 05:29 PM #342
(01-23-2013, 09:37 PM)sassparilla_kid
(01-23-2013, 07:36 PM)Bangaway And what are you waiting for?

I'm checking it out tomorrow, if it appears to be in good running order and has clean registration, it will be mine by Friday afternoon. The only reason I'm even considering it is because I'll be lucky if the transmission in my w123 lasts another 2 or 3 weeks I think, and I probably won't be able to get my w116 running by then, so in the interim between fixing other cars I will more than likely be driving a 1974 240D

Turn up the modulator and dump in some transmission fixa-seal crap. Helped me limp mine another 2k.

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
01-24-2013, 05:29 PM #342

(01-23-2013, 09:37 PM)sassparilla_kid
(01-23-2013, 07:36 PM)Bangaway And what are you waiting for?

I'm checking it out tomorrow, if it appears to be in good running order and has clean registration, it will be mine by Friday afternoon. The only reason I'm even considering it is because I'll be lucky if the transmission in my w123 lasts another 2 or 3 weeks I think, and I probably won't be able to get my w116 running by then, so in the interim between fixing other cars I will more than likely be driving a 1974 240D

Turn up the modulator and dump in some transmission fixa-seal crap. Helped me limp mine another 2k.


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

CRD4x4
CompoundSuperTurboDiesel4x4!

399
02-13-2013, 09:49 PM #343
I wish there were pics...
http://washingtondc.craigslist.org/mld/p...11500.html
No affiliation

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
02-13-2013, 09:49 PM #343

I wish there were pics...
http://washingtondc.craigslist.org/mld/p...11500.html
No affiliation


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

sassparilla_kid
diesel > all other fuels

1,618
03-07-2013, 11:43 PM #344
Me want

http://visalia.craigslist.org/cto/3614236830.html

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
03-07-2013, 11:43 PM #344

Me want

http://visalia.craigslist.org/cto/3614236830.html


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

willbhere4u
Six in a row make her go!

2,507
03-08-2013, 11:25 AM #345
^me to

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
03-08-2013, 11:25 AM #345

^me to


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

winmutt
bitbanger

3,468
03-08-2013, 03:43 PM #346
(03-08-2013, 11:25 AM)willbhere4u ^me to

That is an absolute steal. I wonder what's wrong with it.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
03-08-2013, 03:43 PM #346

(03-08-2013, 11:25 AM)willbhere4u ^me to

That is an absolute steal. I wonder what's wrong with it.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

sassparilla_kid
diesel > all other fuels

1,618
03-08-2013, 11:10 PM #347
(03-08-2013, 03:43 PM)winmutt
(03-08-2013, 11:25 AM)willbhere4u ^me to

That is an absolute steal. I wonder what's wrong with it.

It says "runs and drives fine", I think the problem is called parking and insurance and registration and not great mileage and replacing tires lol

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
03-08-2013, 11:10 PM #347

(03-08-2013, 03:43 PM)winmutt
(03-08-2013, 11:25 AM)willbhere4u ^me to

That is an absolute steal. I wonder what's wrong with it.

It says "runs and drives fine", I think the problem is called parking and insurance and registration and not great mileage and replacing tires lol


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

lgreeley83
Mr. Rumbles

775
03-22-2013, 03:58 AM #348
http://www.ebay.com/itm/1977-1985-Merced...a3&vxp=mtr

38lb flywheel 617

" straighten up that star on the grill, assholes."

lgreeley83
03-22-2013, 03:58 AM #348

http://www.ebay.com/itm/1977-1985-Merced...a3&vxp=mtr

38lb flywheel 617


" straighten up that star on the grill, assholes."

Simpler=Better
PORTED HEAD

2,127
03-22-2013, 08:36 AM #349
(03-22-2013, 03:58 AM)lgreeley83 http://www.ebay.com/itm/1977-1985-Merced...a3&vxp=mtr

38lb flywheel 617
Holy crap. Those things are getting so expensive I've been thinking about casting them myself.

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
03-22-2013, 08:36 AM #349

(03-22-2013, 03:58 AM)lgreeley83 http://www.ebay.com/itm/1977-1985-Merced...a3&vxp=mtr

38lb flywheel 617
Holy crap. Those things are getting so expensive I've been thinking about casting them myself.


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

sassparilla_kid
diesel > all other fuels

1,618
04-07-2013, 01:24 PM #350
Non-egr manifolds, or so it looks

http://sfbay.craigslist.org/pen/pts/3718541948.html
This post was last modified: 04-07-2013, 01:25 PM by sassparilla_kid.

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-07-2013, 01:24 PM #350

Non-egr manifolds, or so it looks

http://sfbay.craigslist.org/pen/pts/3718541948.html


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

Pages (11): Previous 1 5 6 7 8 9 11 Next  
 
  • 3 Vote(s) - 4 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)