STD Other FS / WTB / Buying guides Craiglist alert thread

Craiglist alert thread

Craiglist alert thread

 
  • 3 Vote(s) - 4 Average
 
Pages (11): Previous 1 7 8 9 10 11 Next  
sassparilla_kid
diesel > all other fuels

1,618
04-13-2014, 05:27 PM #451
Buy that immediately

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-13-2014, 05:27 PM #451

Buy that immediately


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

JustPassinThru
W123 and W124

491
04-14-2014, 06:23 PM #452
(04-12-2014, 11:45 AM)mbz123
(04-10-2014, 10:03 PM)lgreeley83 Bring it to me assembled in Chicago and I'll take it at 3k ;-)

I don't have a garage :*-( no major overhaul here yet.
2K to drop in a motor! SRSLY?

One problem seems to be that no one except me trusts that if Zeitgeist (the seller-to-me) says it's a good engine, it really is a good engine.

Another problem is, there are a lot of junker rustbucket '87 300TD's running around in Oregon. As often as not, there's one on Portland or Eugene CL for $1,700 to $2,000. Therefore, people presume that $1,700 is a reasonable price to pay for a fully assembled, smoothly-running one, and they hope they will get one with an interior as nice as this one's for that price.

Zeitgeist himself quoted me $900 to install the engine. That's actually a bargain. The local indie wants $4,000 to swap a good OM603 into a car which has a blown OM603.

So I'm thinking, what I'll end up doing is, I'll assemble it, see if anyone will take it for $2,500, probably not, so I'll settle for $2,000. And then if lgreely83 or winmutt wants me to drive it 1,500 miles to Chicago or 2,000 miles to Atlanta, I'll charge $1,000 for the fuel, time, hotels, and airfare back.

Ergo, three grand. Seriously.

Make sense?

Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
04-14-2014, 06:23 PM #452

(04-12-2014, 11:45 AM)mbz123
(04-10-2014, 10:03 PM)lgreeley83 Bring it to me assembled in Chicago and I'll take it at 3k ;-)

I don't have a garage :*-( no major overhaul here yet.
2K to drop in a motor! SRSLY?

One problem seems to be that no one except me trusts that if Zeitgeist (the seller-to-me) says it's a good engine, it really is a good engine.

Another problem is, there are a lot of junker rustbucket '87 300TD's running around in Oregon. As often as not, there's one on Portland or Eugene CL for $1,700 to $2,000. Therefore, people presume that $1,700 is a reasonable price to pay for a fully assembled, smoothly-running one, and they hope they will get one with an interior as nice as this one's for that price.

Zeitgeist himself quoted me $900 to install the engine. That's actually a bargain. The local indie wants $4,000 to swap a good OM603 into a car which has a blown OM603.

So I'm thinking, what I'll end up doing is, I'll assemble it, see if anyone will take it for $2,500, probably not, so I'll settle for $2,000. And then if lgreely83 or winmutt wants me to drive it 1,500 miles to Chicago or 2,000 miles to Atlanta, I'll charge $1,000 for the fuel, time, hotels, and airfare back.

Ergo, three grand. Seriously.

Make sense?


Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).

mbz123
GT2256V

122
04-15-2014, 02:33 PM #453
JustPassinThru Make sense?
Perfect. ;D

NOW, stop with this:
(04-14-2014, 06:23 PM)JustPassinThru ...So I'm thinking, what I'll end up doing is...

and ALL this:
(04-14-2014, 06:23 PM)JustPassinThru One problem seems to be...
yahhh
(04-14-2014, 06:23 PM)JustPassinThru it really is a good engine.
I really like them french fried taters
(04-14-2014, 06:23 PM)JustPassinThru Another problem is...
mmhmm
(04-14-2014, 06:23 PM)JustPassinThru As often as not......Therefore, people presume.....and they hope they will get...
yaaaaaaaaaaaaaaaaawwwwwwn
(04-14-2014, 06:23 PM)JustPassinThru Zeitgeist himself quoted...actually a bargain...The local indie ...a blown OM603.
blah blah blah blah and wah wah wah wah
(04-14-2014, 06:23 PM)JustPassinThru if anyone will take it...And then if..
wah wah
(04-14-2014, 06:23 PM)JustPassinThru ...for the fuel, time, hotels, and airfare...Ergo, three grand.
whew!

now DO this:
(04-14-2014, 06:23 PM)JustPassinThru ...I'll assemble it...

BECAUSE this:
(04-10-2014, 10:03 PM)lgreeley83 Bring it to me assembled in Chicago and I'll take it at 3k ;-)

now you see why I'm this;
(04-14-2014, 06:23 PM)MBZ123 SRSLY? 2K to drop in a motor! And you need time to think about... wat... exactly?

The wagon is all but sold, buyer waiting to hand over payment and you'd rather rehearse your Shakespeare in front of company. SRSLY? How rude.

I'm sure a few of us here would love to be head to toe grease all day, every day until we set off eastbound on I-70 for a Chi-town delivery. O ya, happens to be the bestest most besutifullest time of year to travel that route, too.

MBZ123

PS - A lil over three hundy in fuel to get there. And a little suggestion: Buy a return ticket on the California Zephyr. You'll never forget the trip back either. Yes, it seems you've been presented with what is known as a "golden opportunity" kiddo.
mbz123
04-15-2014, 02:33 PM #453

JustPassinThru Make sense?
Perfect. ;D

NOW, stop with this:
(04-14-2014, 06:23 PM)JustPassinThru ...So I'm thinking, what I'll end up doing is...

and ALL this:
(04-14-2014, 06:23 PM)JustPassinThru One problem seems to be...
yahhh
(04-14-2014, 06:23 PM)JustPassinThru it really is a good engine.
I really like them french fried taters
(04-14-2014, 06:23 PM)JustPassinThru Another problem is...
mmhmm
(04-14-2014, 06:23 PM)JustPassinThru As often as not......Therefore, people presume.....and they hope they will get...
yaaaaaaaaaaaaaaaaawwwwwwn
(04-14-2014, 06:23 PM)JustPassinThru Zeitgeist himself quoted...actually a bargain...The local indie ...a blown OM603.
blah blah blah blah and wah wah wah wah
(04-14-2014, 06:23 PM)JustPassinThru if anyone will take it...And then if..
wah wah
(04-14-2014, 06:23 PM)JustPassinThru ...for the fuel, time, hotels, and airfare...Ergo, three grand.
whew!

now DO this:
(04-14-2014, 06:23 PM)JustPassinThru ...I'll assemble it...

BECAUSE this:
(04-10-2014, 10:03 PM)lgreeley83 Bring it to me assembled in Chicago and I'll take it at 3k ;-)

now you see why I'm this;
(04-14-2014, 06:23 PM)MBZ123 SRSLY? 2K to drop in a motor! And you need time to think about... wat... exactly?

The wagon is all but sold, buyer waiting to hand over payment and you'd rather rehearse your Shakespeare in front of company. SRSLY? How rude.

I'm sure a few of us here would love to be head to toe grease all day, every day until we set off eastbound on I-70 for a Chi-town delivery. O ya, happens to be the bestest most besutifullest time of year to travel that route, too.

MBZ123

PS - A lil over three hundy in fuel to get there. And a little suggestion: Buy a return ticket on the California Zephyr. You'll never forget the trip back either. Yes, it seems you've been presented with what is known as a "golden opportunity" kiddo.

JustPassinThru
W123 and W124

491
04-15-2014, 03:29 PM #454
> The wagon is all but sold, buyer waiting to hand over payment, and you'd rather rehearse your Shakespeare...

I don't know about that "all but sold" bit; lgreely83 *did* put a wink smiley at the end of his offer. I suspect you are taking him too literally.

lgreely83, if you're seriously interested, PM me.

Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
04-15-2014, 03:29 PM #454

> The wagon is all but sold, buyer waiting to hand over payment, and you'd rather rehearse your Shakespeare...

I don't know about that "all but sold" bit; lgreely83 *did* put a wink smiley at the end of his offer. I suspect you are taking him too literally.

lgreely83, if you're seriously interested, PM me.


Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).

lgreeley83
Mr. Rumbles

775
04-16-2014, 07:05 AM #455
   

Seems pretty fair to me. That drive across the plains I'd say a car porter should get extra money for not crashing from falling asleep due to Boredoms.
This post was last modified: 04-16-2014, 07:09 AM by lgreeley83.

" straighten up that star on the grill, assholes."

lgreeley83
04-16-2014, 07:05 AM #455

   


Seems pretty fair to me. That drive across the plains I'd say a car porter should get extra money for not crashing from falling asleep due to Boredoms.


" straighten up that star on the grill, assholes."

lgreeley83
Mr. Rumbles

775
04-16-2014, 08:29 AM #456
OK I had to reread to see what's going on. That was really only semi serious. 1 I need a job first so my time is maybe June before I add to my fleet. 2 asking someone to drive across the country is a big endeavor. I imagine that offer is not so quick and easy. Selling local at a hit in the pocket may save more money than risking driving 1000 or more mile. A breakdown could add multiple Days at hotels. Days away from work. General headaches and frustrations. Also don't forget the highway pirates trying to steal your booty.

" straighten up that star on the grill, assholes."

lgreeley83
04-16-2014, 08:29 AM #456

OK I had to reread to see what's going on. That was really only semi serious. 1 I need a job first so my time is maybe June before I add to my fleet. 2 asking someone to drive across the country is a big endeavor. I imagine that offer is not so quick and easy. Selling local at a hit in the pocket may save more money than risking driving 1000 or more mile. A breakdown could add multiple Days at hotels. Days away from work. General headaches and frustrations. Also don't forget the highway pirates trying to steal your booty.


" straighten up that star on the grill, assholes."

JustPassinThru
W123 and W124

491
04-16-2014, 10:49 AM #457
Yes, I didn't think it was anything but light humor.

Sometimes we giants take ourselves too seriously. That's why Demosthenes (not Shakespeare) invented philippics

http://en.wikipedia.org/wiki/Philippic

...which, when Cicero tried imitating them, got Cicero's hands chopped off by one of his targets, Mark Anthony

...which in turn was probably the real reason why Tacitus invented taciturnicity

http://dictionary.reference.com/browse/taciturn

and now my goatee is beginning to itch. Time to go enjoy an unfiltered Gauloise

http://www.you-smoke.com/category/11-gau...ettes.aspx

***edited: OMG, they're shutting the Gauloises factory:

http://www.bloomberg.com/news/2014-04-14...rance.html

Better stock up. Truly we are in the end times.***
This post was last modified: 04-25-2014, 06:20 PM by JustPassinThru.

Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
04-16-2014, 10:49 AM #457

Yes, I didn't think it was anything but light humor.

Sometimes we giants take ourselves too seriously. That's why Demosthenes (not Shakespeare) invented philippics

http://en.wikipedia.org/wiki/Philippic

...which, when Cicero tried imitating them, got Cicero's hands chopped off by one of his targets, Mark Anthony

...which in turn was probably the real reason why Tacitus invented taciturnicity

http://dictionary.reference.com/browse/taciturn

and now my goatee is beginning to itch. Time to go enjoy an unfiltered Gauloise

http://www.you-smoke.com/category/11-gau...ettes.aspx

***edited: OMG, they're shutting the Gauloises factory:

http://www.bloomberg.com/news/2014-04-14...rance.html

Better stock up. Truly we are in the end times.***


Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).

mike-81-240d
more like mike-84-300d now

427
04-16-2014, 10:31 PM #458
The 603 sounds kind of tempting. hehe

1981 Mercedes 300TD Lowered 4 speed manual Holset HX30 
mike-81-240d
04-16-2014, 10:31 PM #458

The 603 sounds kind of tempting. hehe


1981 Mercedes 300TD Lowered 4 speed manual Holset HX30 

JB3
Superturbo

1,795
04-30-2014, 05:50 PM #459
4 speed already converted 123 wagon. might be a good deal. guy wants 3500 starting price, and wants offers made, as hes on his way somewhere-

http://providence.craigslist.org/cto/4421806461.html
This post was last modified: 04-30-2014, 05:51 PM by JB3.

1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

JB3
04-30-2014, 05:50 PM #459

4 speed already converted 123 wagon. might be a good deal. guy wants 3500 starting price, and wants offers made, as hes on his way somewhere-

http://providence.craigslist.org/cto/4421806461.html


1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

sassparilla_kid
diesel > all other fuels

1,618
05-09-2014, 02:27 PM #460
W123 300D lange

http://goldcountry.craigslist.org/cto/4446988621.html

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
05-09-2014, 02:27 PM #460

W123 300D lange

http://goldcountry.craigslist.org/cto/4446988621.html


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

RonB
TA 0301

69
05-11-2014, 02:54 AM #461
In Australia and in very nice condition..
1976 300D W115
RonB
05-11-2014, 02:54 AM #461

In Australia and in very nice condition..
1976 300D W115

Purplecomputer
Slowness 220D

897
05-11-2014, 12:13 PM #462
(05-11-2014, 02:54 AM)RonB In Australia and in very nice condition..
1976 300D W115

I had no idea w115 came with a turbo
Purplecomputer
05-11-2014, 12:13 PM #462

(05-11-2014, 02:54 AM)RonB In Australia and in very nice condition..
1976 300D W115

I had no idea w115 came with a turbo

meareweird
TA 0301

70
05-22-2014, 06:11 AM #463
Marysville, Ohio

Turbo related stuff
TO BE EDITED
This post was last modified: 05-22-2014, 02:48 PM by meareweird.
meareweird
05-22-2014, 06:11 AM #463

Marysville, Ohio

Turbo related stuff
TO BE EDITED

waz
GTA2056V

77
05-22-2014, 09:45 AM #464
The link you put up will let people edit and end the posting.
Might want to use this one:
http://columbus.craigslist.org/pts/4480472158.html

I'd be interested in the turbo and exhaust manifold.
Sending a PM.

***********************************************
1993 300D 2.5L turbo. W124.128   2.5L 602.962
1991 350SD W126.134  Transplanted a 3.0L 603.961 into it.

waz
05-22-2014, 09:45 AM #464

The link you put up will let people edit and end the posting.
Might want to use this one:
http://columbus.craigslist.org/pts/4480472158.html

I'd be interested in the turbo and exhaust manifold.
Sending a PM.


***********************************************
1993 300D 2.5L turbo. W124.128   2.5L 602.962
1991 350SD W126.134  Transplanted a 3.0L 603.961 into it.

Mr_Robs
GT2256V

124
06-11-2014, 07:01 PM #465
Not my for sale ad but someone might be interested in this bumper.

I can go look at it in person if anyone wants.


http://sfbay.craigslist.org/sby/pts/4498811797.html
Mr_Robs
06-11-2014, 07:01 PM #465

Not my for sale ad but someone might be interested in this bumper.

I can go look at it in person if anyone wants.


http://sfbay.craigslist.org/sby/pts/4498811797.html

CRD4x4
CompoundSuperTurboDiesel4x4!

399
09-19-2014, 11:52 AM #466
1940's ratrod chopped dually truck with om617

http://richmond.craigslist.org/cto/4625951222.html

No affiliation!

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
09-19-2014, 11:52 AM #466

1940's ratrod chopped dually truck with om617

http://richmond.craigslist.org/cto/4625951222.html

No affiliation!


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

Edian727
Dreams of 8mm 617

127
09-19-2014, 06:56 PM #467
that is super cool someone buy it!
Edian727
09-19-2014, 06:56 PM #467

that is super cool someone buy it!

mbz123
GT2256V

122
09-20-2014, 04:14 AM #468
(09-19-2014, 06:56 PM)Edian727 that is super DUMB if someone buys it!

there, fixed that for you

"Those few things and you are on your way." ROTFF!!! He says this after informing everyone that the frame needs GUSSETING, the cab AND bed need to be MOUNTED, NOTHING resembling a braking system exists, NOR a wiring harness for that matter, n oh ya, a fuel tank and air pump will need to be figured out. This is a joke right? This clown has what amounts to around fifteen hundred duckets in scrap and in some hallucinatory state he says he wants WAT????

As if it couldn't get better, he divulges the small fact that HE has no time to finish, FOR HIMSELF OR A CUSTOMER! But why you ask? Simple, his business is booming! If he had no time, why start in on the project? If biz is so great, why not hire someone to do the work you've become disenchanted with? Always better odds of selling something that's operating even if highly customized to YOUR tastes. But alas, he stumbles forward in his grandelusion and lists off possible trades (MOST HAVING VALUE!) and has the gall to demand any potential trades not listed be "REAL." Because asking for outrageous $$$$$ or a running AND titled vehicle in exchange for his mountain of metal is so "REAL," did I get this right? Jimeny Cricket. Want proof he isn't even real? What did we learn about those individuals that use the phrase "honestly" or "to tell you the truth" when talking to you? Mmmmhmmm

We also learned about the birth rate of suckers which is why he put an ad up. My money is on him growing impatient, tho, with waiting for his sucker and heading down to the swap after he takes everything to pieces. Anyone giving odds???? And guess how much he'll total at the flea market? About fifteen sounds "REAL." amiriteoramirite.jpg

That reminds me, anybody know if a craigs turd thread exists here? If not, I have a suggestion for its christening post 8-D

MBZ123
mbz123
09-20-2014, 04:14 AM #468

(09-19-2014, 06:56 PM)Edian727 that is super DUMB if someone buys it!

there, fixed that for you

"Those few things and you are on your way." ROTFF!!! He says this after informing everyone that the frame needs GUSSETING, the cab AND bed need to be MOUNTED, NOTHING resembling a braking system exists, NOR a wiring harness for that matter, n oh ya, a fuel tank and air pump will need to be figured out. This is a joke right? This clown has what amounts to around fifteen hundred duckets in scrap and in some hallucinatory state he says he wants WAT????

As if it couldn't get better, he divulges the small fact that HE has no time to finish, FOR HIMSELF OR A CUSTOMER! But why you ask? Simple, his business is booming! If he had no time, why start in on the project? If biz is so great, why not hire someone to do the work you've become disenchanted with? Always better odds of selling something that's operating even if highly customized to YOUR tastes. But alas, he stumbles forward in his grandelusion and lists off possible trades (MOST HAVING VALUE!) and has the gall to demand any potential trades not listed be "REAL." Because asking for outrageous $$$$$ or a running AND titled vehicle in exchange for his mountain of metal is so "REAL," did I get this right? Jimeny Cricket. Want proof he isn't even real? What did we learn about those individuals that use the phrase "honestly" or "to tell you the truth" when talking to you? Mmmmhmmm

We also learned about the birth rate of suckers which is why he put an ad up. My money is on him growing impatient, tho, with waiting for his sucker and heading down to the swap after he takes everything to pieces. Anyone giving odds???? And guess how much he'll total at the flea market? About fifteen sounds "REAL." amiriteoramirite.jpg

That reminds me, anybody know if a craigs turd thread exists here? If not, I have a suggestion for its christening post 8-D

MBZ123

mbz123
GT2256V

122
09-20-2014, 11:58 AM #469
Not my speed, buuuuuuuuuut you may be on to something! Get her to finish the build THEN put them both up for sale... 8-D

Anybody game? I've got one too many projects already and no room in the stable.

For those looking for coupe seats:

http://portland.craigslist.org/mlt/pts/4632843637.html

and a decent wagon:

http://portland.craigslist.org/clk/cto/4670772618.html

MBZ123
mbz123
09-20-2014, 11:58 AM #469

Not my speed, buuuuuuuuuut you may be on to something! Get her to finish the build THEN put them both up for sale... 8-D

Anybody game? I've got one too many projects already and no room in the stable.

For those looking for coupe seats:

http://portland.craigslist.org/mlt/pts/4632843637.html

and a decent wagon:

http://portland.craigslist.org/clk/cto/4670772618.html

MBZ123

mbz123
GT2256V

122
09-21-2014, 05:04 AM #470
(09-20-2014, 05:23 PM)CRD4x4 Re: Your 1980 300TD
I thought '81 was the first year of the 300TD in the USofA.

1981 was the first year for the turbo wagon here in the States. The 300TD, aka the W123 estate or S123, was sold in the US market from MY1979 to MY1985. Those sold in '79 and '80 had normally aspirated power plants. A few TD's rolled out in January '86, but the last model year for the W123 lineup was 1985.

Full disclosure - that's neither my wagon nor am I affiliated in any way with seller. Just bringing attention to it.

As listed, it's a decent deal. Unless the underside resembles Swiss cheese, which seems unlikely, it could be a score for someone local. A couple hours drive closer to me and I woulda been gettin fitted for my CWC jacket right now. 8-D

MBZ123
mbz123
09-21-2014, 05:04 AM #470

(09-20-2014, 05:23 PM)CRD4x4 Re: Your 1980 300TD
I thought '81 was the first year of the 300TD in the USofA.

1981 was the first year for the turbo wagon here in the States. The 300TD, aka the W123 estate or S123, was sold in the US market from MY1979 to MY1985. Those sold in '79 and '80 had normally aspirated power plants. A few TD's rolled out in January '86, but the last model year for the W123 lineup was 1985.

Full disclosure - that's neither my wagon nor am I affiliated in any way with seller. Just bringing attention to it.

As listed, it's a decent deal. Unless the underside resembles Swiss cheese, which seems unlikely, it could be a score for someone local. A couple hours drive closer to me and I woulda been gettin fitted for my CWC jacket right now. 8-D

MBZ123

CRD4x4
CompoundSuperTurboDiesel4x4!

399
09-30-2014, 06:42 PM #471
$900 BMW 6-Speed Manual trans, flywheel, clutch, shifter, driveshaft, etc. from M5

http://greenville.craigslist.org/pts/4664320922.html

No affiliation.

On my wish list: $500 dry sump oiling setup

http://winchester.craigslist.org/pts/4602193522.html

Unaffiliated.
This post was last modified: 09-30-2014, 07:32 PM by CRD4x4.

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
09-30-2014, 06:42 PM #471

$900 BMW 6-Speed Manual trans, flywheel, clutch, shifter, driveshaft, etc. from M5

http://greenville.craigslist.org/pts/4664320922.html

No affiliation.


On my wish list: $500 dry sump oiling setup

http://winchester.craigslist.org/pts/4602193522.html

Unaffiliated.


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

Folkien
Naturally-aspirated

3
10-04-2014, 01:14 PM #472
1985 MERCEDES BENZ 190e 16v COSWORTH - $1750 (Salineville, OH)

http://youngstown.craigslist.org/cto/4698992859.html
Folkien
10-04-2014, 01:14 PM #472

1985 MERCEDES BENZ 190e 16v COSWORTH - $1750 (Salineville, OH)

http://youngstown.craigslist.org/cto/4698992859.html

CRD4x4
CompoundSuperTurboDiesel4x4!

399
10-29-2014, 11:23 AM #473
Weird $500 diesel project
1994 (or 1996) Toyota Previa All-Trac (AWD) with "50,000km" JDM diesel motor!

http://washingtondc.craigslist.org/doc/c...96595.html

Absolutely no affiliation with seller!

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
10-29-2014, 11:23 AM #473

Weird $500 diesel project
1994 (or 1996) Toyota Previa All-Trac (AWD) with "50,000km" JDM diesel motor!

http://washingtondc.craigslist.org/doc/c...96595.html

Absolutely no affiliation with seller!


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

Edian727
Dreams of 8mm 617

127
11-01-2014, 09:20 AM #474
73 220d 500$. manual trans lots of rust hastn been started in a while. no association.

http://spokane.craigslist.org/cto/4714586704.html

and even 2 more for 400 but 71 220d's
http://spokane.craigslist.org/cto/4714573767.html
http://spokane.craigslist.org/cto/4714599111.html this one is auto

figured they'd make good parts cars for a manual conversion for a 300d Smile
Edian727
11-01-2014, 09:20 AM #474

73 220d 500$. manual trans lots of rust hastn been started in a while. no association.

http://spokane.craigslist.org/cto/4714586704.html

and even 2 more for 400 but 71 220d's
http://spokane.craigslist.org/cto/4714573767.html
http://spokane.craigslist.org/cto/4714599111.html this one is auto

figured they'd make good parts cars for a manual conversion for a 300d Smile

mo1971fordcrew
Glug Glug Glug

29
11-04-2014, 11:51 AM #475
(11-01-2014, 09:20 AM)Edian727 73 220d 500$. manual trans lots of rust hastn been started in a while. no association.

http://spokane.craigslist.org/cto/4714586704.html

and even 2 more for 400 but 71 220d's
http://spokane.craigslist.org/cto/4714573767.html
http://spokane.craigslist.org/cto/4714599111.html this one is auto

figured they'd make good parts cars for a manual conversion for a 300d Smile
Oh I saw those on there. He also has a 1960 190D for $500

1980 Mercedes 300TD - Engine: 1983 OM617, W126 rear "blue" springs, turbo front springs, ALDA and rack limiter removed, boost @ 12psi. 2.5 inch exhaust off 6.9 diesel, straight pipe. Manual climate control. 2.88 diff.
mo1971fordcrew
11-04-2014, 11:51 AM #475

(11-01-2014, 09:20 AM)Edian727 73 220d 500$. manual trans lots of rust hastn been started in a while. no association.

http://spokane.craigslist.org/cto/4714586704.html

and even 2 more for 400 but 71 220d's
http://spokane.craigslist.org/cto/4714573767.html
http://spokane.craigslist.org/cto/4714599111.html this one is auto

figured they'd make good parts cars for a manual conversion for a 300d Smile
Oh I saw those on there. He also has a 1960 190D for $500


1980 Mercedes 300TD - Engine: 1983 OM617, W126 rear "blue" springs, turbo front springs, ALDA and rack limiter removed, boost @ 12psi. 2.5 inch exhaust off 6.9 diesel, straight pipe. Manual climate control. 2.88 diff.

Austincarnut
Holset

298
11-23-2014, 07:05 PM #476
I call bullshit! that's a om606, the guy said its not a 2004, but rather actually a 2005, which should make it a 648, somethings not adding up


(11-23-2014, 06:20 PM)CRD4x4 2004 E320 CDI engine - $2,000.00

http://reading.craigslist.org/pts/4736896290.html

No affiliation!
Austincarnut
11-23-2014, 07:05 PM #476

I call bullshit! that's a om606, the guy said its not a 2004, but rather actually a 2005, which should make it a 648, somethings not adding up


(11-23-2014, 06:20 PM)CRD4x4 2004 E320 CDI engine - $2,000.00

http://reading.craigslist.org/pts/4736896290.html

No affiliation!

capflya
Dreaming of a VNT

309
12-06-2014, 10:51 PM #477
A little pricey..



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
12-06-2014, 10:51 PM #477

A little pricey..




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

Folkien
Naturally-aspirated

3
02-05-2015, 09:18 PM #478
http://cnj.craigslist.org/pts/4874989803.html

'99 606 with 130k. $1500, someone get on that.
Folkien
02-05-2015, 09:18 PM #478

http://cnj.craigslist.org/pts/4874989803.html

'99 606 with 130k. $1500, someone get on that.

RonB
TA 0301

69
02-06-2015, 12:11 AM #479
(02-05-2015, 09:18 PM)Folkien http://cnj.craigslist.org/pts/4874989803.html

'99 606 with 130k. $1500, someone get on that.
wrong Hamilton,in the wrong country for me...Sad other wise I would grab it as a donor for a w123 project i am chewing around in my head.
RonB
02-06-2015, 12:11 AM #479

(02-05-2015, 09:18 PM)Folkien http://cnj.craigslist.org/pts/4874989803.html

'99 606 with 130k. $1500, someone get on that.
wrong Hamilton,in the wrong country for me...Sad other wise I would grab it as a donor for a w123 project i am chewing around in my head.

97e300
(its a 98 now)

109
02-07-2015, 11:30 PM #480
(02-05-2015, 09:18 PM)Folkien http://cnj.craigslist.org/pts/4874989803.html

'99 606 with 130k. $1500, someone get on that.

That's a really good deal. I'd jump on that if I wasn't on the other side of the country.
97e300
02-07-2015, 11:30 PM #480

(02-05-2015, 09:18 PM)Folkien http://cnj.craigslist.org/pts/4874989803.html

'99 606 with 130k. $1500, someone get on that.

That's a really good deal. I'd jump on that if I wasn't on the other side of the country.

Captain America
Boostin' & Roostin'

2,221
03-29-2015, 03:20 PM #481
WOW! I wish

http://orangecounty.craigslist.org/cto/4910126417.html


1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag

AX15 Jeep Trans swap in progress....

Captain America
03-29-2015, 03:20 PM #481

WOW! I wish

http://orangecounty.craigslist.org/cto/4910126417.html



1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag

AX15 Jeep Trans swap in progress....

w123love
Stockish

354
03-30-2015, 03:12 PM #482
(03-29-2015, 03:20 PM)Captain America WOW! I wish

http://orangecounty.craigslist.org/cto/4910126417.html

Gahhhh what was it?? I MUST KNOW

if it don’t blow black...take it back.

1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty

The VEGEWGN
w123love
03-30-2015, 03:12 PM #482

(03-29-2015, 03:20 PM)Captain America WOW! I wish

http://orangecounty.craigslist.org/cto/4910126417.html

Gahhhh what was it?? I MUST KNOW


if it don’t blow black...take it back.

1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty

The VEGEWGN

CRD4x4
CompoundSuperTurboDiesel4x4!

399
06-12-2015, 05:42 PM #483
Ok. Not on craigslist, not really a MB and not on a land mass shared by 99.9% of us BUT this is a cool truck!! Ssangyong Korando 2.9 (OM602) with 5-speed manual & 4×4 for around $3,000 USD:

https://bland.is/til-solu/farartaeki/bil...l/2754179/

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
06-12-2015, 05:42 PM #483

Ok. Not on craigslist, not really a MB and not on a land mass shared by 99.9% of us BUT this is a cool truck!! Ssangyong Korando 2.9 (OM602) with 5-speed manual & 4×4 for around $3,000 USD:

https://bland.is/til-solu/farartaeki/bil...l/2754179/


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

Got Poof
Caterpillar 777

21
06-28-2015, 07:28 PM #484
SDL project for sale

http://sandiego.craigslist.org/esd/cto/5097412899.html

U85 - 300TD Black Wagon, Non EGR exhaust manifold, W115 intake (SOLD)
87 - 300SDL Black, AMG 17" Wheels, Euro Headlights, #18 Head (FOR SALE)
Got Poof
06-28-2015, 07:28 PM #484

SDL project for sale

http://sandiego.craigslist.org/esd/cto/5097412899.html


U85 - 300TD Black Wagon, Non EGR exhaust manifold, W115 intake (SOLD)
87 - 300SDL Black, AMG 17" Wheels, Euro Headlights, #18 Head (FOR SALE)

llopness
K26-2

48
07-12-2015, 09:24 PM #485
1987 300TDT
not sure if it's still there
http://burlington.craigslist.org/cto/5056077864.html
llopness
07-12-2015, 09:24 PM #485

1987 300TDT
not sure if it's still there
http://burlington.craigslist.org/cto/5056077864.html

EmJay
Holset

299
07-28-2015, 07:14 AM #486
This one is mine. http://atlanta.craigslist.org/nat/cto/5138681216.html

1987 Mazda B2200 "outlaw" **planning phase**  Chevy 283, Power Pack heads, Edelbrock carb and intake, turbo 350 trans Smile
1985 Mercedes 300D stock for now
EmJay
07-28-2015, 07:14 AM #486

This one is mine. http://atlanta.craigslist.org/nat/cto/5138681216.html


1987 Mazda B2200 "outlaw" **planning phase**  Chevy 283, Power Pack heads, Edelbrock carb and intake, turbo 350 trans Smile
1985 Mercedes 300D stock for now

EmJay
Holset

299
07-28-2015, 06:02 PM #487
This one is not mine
http://atlanta.craigslist.org/atl/cto/5134099917.html

1987 Mazda B2200 "outlaw" **planning phase**  Chevy 283, Power Pack heads, Edelbrock carb and intake, turbo 350 trans Smile
1985 Mercedes 300D stock for now
EmJay
07-28-2015, 06:02 PM #487

This one is not mine
http://atlanta.craigslist.org/atl/cto/5134099917.html


1987 Mazda B2200 "outlaw" **planning phase**  Chevy 283, Power Pack heads, Edelbrock carb and intake, turbo 350 trans Smile
1985 Mercedes 300D stock for now

Whizbang
TA 0301

51
CRD4x4
CompoundSuperTurboDiesel4x4!

399
08-24-2015, 07:37 PM #489
I wish it had more info or pix...'74 diesel 4-speed manual $1,200 or trade

https://washingtondc.craigslist.org/nva/...20574.html

Not mine...
CRD4x4
08-24-2015, 07:37 PM #489

I wish it had more info or pix...'74 diesel 4-speed manual $1,200 or trade

https://washingtondc.craigslist.org/nva/...20574.html

Not mine...

raysorenson
Superturbo

1,162
09-20-2015, 06:42 PM #490
http://auburn.craigslist.org/pts/5181829310.html

W116 I think. Looks like it's got a set of Pentas on it. Front air dam, rear spoiler, euro headlights. Euro bumpers? Auburn AL.
raysorenson
09-20-2015, 06:42 PM #490

http://auburn.craigslist.org/pts/5181829310.html

W116 I think. Looks like it's got a set of Pentas on it. Front air dam, rear spoiler, euro headlights. Euro bumpers? Auburn AL.

Edian727
Dreams of 8mm 617

127
09-20-2015, 09:26 PM #491
i wouldnt call it CL but in the spokane valley pull and save theres a 83? 190d 601 and 5-speed. complete engine and transmission theres earlier today. dont have the cash or space for it figured some here might. they are cheap, 165 for a whole egine, 65 trans and somewhere near 30 for the clutch bs, and i think 20 or so for a 2-piece driveline.
Edian727
09-20-2015, 09:26 PM #491

i wouldnt call it CL but in the spokane valley pull and save theres a 83? 190d 601 and 5-speed. complete engine and transmission theres earlier today. dont have the cash or space for it figured some here might. they are cheap, 165 for a whole egine, 65 trans and somewhere near 30 for the clutch bs, and i think 20 or so for a 2-piece driveline.

ThEuNnAmEd1
Unregistered

 
10-03-2015, 12:47 PM #492
Thought I would post this on here. You guys will probably pick it apart, but its my diesel. Have at it.

http://columbus.craigslist.org/cto/5248451949.html
ThEuNnAmEd1
10-03-2015, 12:47 PM #492

Thought I would post this on here. You guys will probably pick it apart, but its my diesel. Have at it.

http://columbus.craigslist.org/cto/5248451949.html

ak47is1337
GTA2056V

97
10-24-2015, 07:02 PM #493
OM606 turbo W210 $2000 @ iowa city
http://iowacity.craigslist.org/cto/5283624585.html
ak47is1337
10-24-2015, 07:02 PM #493

OM606 turbo W210 $2000 @ iowa city
http://iowacity.craigslist.org/cto/5283624585.html

CRD4x4
CompoundSuperTurboDiesel4x4!

399
10-25-2015, 12:36 PM #494
606 NA 98 E300 +/-160k for $1700 (suspension damage)

https://easternshore.craigslist.org/cto/5281850912.html
CRD4x4
10-25-2015, 12:36 PM #494

606 NA 98 E300 +/-160k for $1700 (suspension damage)

https://easternshore.craigslist.org/cto/5281850912.html

CRD4x4
CompoundSuperTurboDiesel4x4!

399
11-01-2015, 09:27 AM #495
Wow! $2500 1999 E55 bad head gasket! 125k miles 
This one needs to catch a STD!!
https://washingtondc.craigslist.org/nva/...81989.html
CRD4x4
11-01-2015, 09:27 AM #495

Wow! $2500 1999 E55 bad head gasket! 125k miles 
This one needs to catch a STD!!
https://washingtondc.craigslist.org/nva/...81989.html

capflya
Dreaming of a VNT

309
11-05-2015, 01:21 PM #496
$1200 '98 E300 in Phoenix area with 150k miles and a "recently" replaced transmission... I'd be all over this if I had the cash Big Grin

https://phoenix.craigslist.org/nph/cto/5255323702.html



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
11-05-2015, 01:21 PM #496

$1200 '98 E300 in Phoenix area with 150k miles and a "recently" replaced transmission... I'd be all over this if I had the cash Big Grin

https://phoenix.craigslist.org/nph/cto/5255323702.html




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

EmJay
Holset

299
01-03-2016, 01:08 PM #497
Not Craigslist or eBay, but a 95 e300D at North Atlanta PaP, OM 606 NA. 316K on the clock.

1987 Mazda B2200 "outlaw" **planning phase**  Chevy 283, Power Pack heads, Edelbrock carb and intake, turbo 350 trans Smile
1985 Mercedes 300D stock for now
EmJay
01-03-2016, 01:08 PM #497

Not Craigslist or eBay, but a 95 e300D at North Atlanta PaP, OM 606 NA. 316K on the clock.


1987 Mazda B2200 "outlaw" **planning phase**  Chevy 283, Power Pack heads, Edelbrock carb and intake, turbo 350 trans Smile
1985 Mercedes 300D stock for now

Matej
GT2256V

141
01-12-2016, 08:09 PM #498
Awesome semi-local deal:
http://loz.craigslist.org/cto/5399558446.html

Irony.cc
Matej
01-12-2016, 08:09 PM #498

Awesome semi-local deal:
http://loz.craigslist.org/cto/5399558446.html


Irony.cc

CRD4x4
CompoundSuperTurboDiesel4x4!

399
01-22-2016, 02:40 PM #499
My main reason for posting this is because I hadn't heard of this B/W T50 5-speed before and it's got a removable bellhousing. I wonder if it'd hold the torque of a 617a.

https://baltimore.craigslist.org/wto/5410726038.html
CRD4x4
01-22-2016, 02:40 PM #499

My main reason for posting this is because I hadn't heard of this B/W T50 5-speed before and it's got a removable bellhousing. I wonder if it'd hold the torque of a 617a.

https://baltimore.craigslist.org/wto/5410726038.html

Om606w201
K26-2

45
04-30-2016, 10:18 AM #500
Full 5 speed swap on Craigslist for w201.

Posting;

w201 190e 5 speed manual transmission - $950 (fremont / union city / newark)

717.432 GL76/27 from a 1993 190 2.6 Sportline SE

Transmission bolt pattern will fit mercedes engines; m102, m103, m104, m111, om601, om602 and om603. w201 and w124 chassis'.

Available parts are:
Flywheel
Transmission
Shifter
Linkage
Manual driveshaft front section
Om606w201
04-30-2016, 10:18 AM #500

Full 5 speed swap on Craigslist for w201.

Posting;

w201 190e 5 speed manual transmission - $950 (fremont / union city / newark)

717.432 GL76/27 from a 1993 190 2.6 Sportline SE

Transmission bolt pattern will fit mercedes engines; m102, m103, m104, m111, om601, om602 and om603. w201 and w124 chassis'.

Available parts are:
Flywheel
Transmission
Shifter
Linkage
Manual driveshaft front section

Pages (11): Previous 1 7 8 9 10 11 Next  
 
  • 3 Vote(s) - 4 Average
Users browsing this thread:
 5 Guest(s)
Users browsing this thread:
 5 Guest(s)