STD Tuning Engine fuel line size

fuel line size

fuel line size

 
  • 0 Vote(s) - 0 Average
 
yota4life
K26-2

40
08-17-2016, 10:46 PM #1
What's the fuel line size from the fuel filter to the sides of the ip the clear ones. Mine cracked ordered the wrong size. And haven't been able to fined the size anywhere online.
yota4life
08-17-2016, 10:46 PM #1

What's the fuel line size from the fuel filter to the sides of the ip the clear ones. Mine cracked ordered the wrong size. And haven't been able to fined the size anywhere online.

NZScott
HX30W 73/44mm

398
08-17-2016, 11:43 PM #2
Don't know what engine you're talking about but if it's a 617 (which most 'muricans seem to have) try slipping 5/16" over the barbs but leave the clear hose still on the barb.


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
08-17-2016, 11:43 PM #2

Don't know what engine you're talking about but if it's a 617 (which most 'muricans seem to have) try slipping 5/16" over the barbs but leave the clear hose still on the barb.



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




zeeman
Holset

444
08-18-2016, 01:34 AM #3
(08-17-2016, 10:46 PM)yota4life What's the fuel line size from the fuel filter to the sides of the ip the clear ones. Mine cracked ordered the wrong size. And haven't been able to fined the size anywhere online.

They are 6mm, I heat up the banjo fitting with a heat gun and push the tubing on and use a pex tubing crimp clamp. Works great and is tight.
This post was last modified: 08-18-2016, 01:37 AM by zeeman.
Attached Files
Image(s)
   
zeeman
08-18-2016, 01:34 AM #3

(08-17-2016, 10:46 PM)yota4life What's the fuel line size from the fuel filter to the sides of the ip the clear ones. Mine cracked ordered the wrong size. And haven't been able to fined the size anywhere online.

They are 6mm, I heat up the banjo fitting with a heat gun and push the tubing on and use a pex tubing crimp clamp. Works great and is tight.

Attached Files
Image(s)
   

Tobulus
GT2256V

136
08-18-2016, 08:16 AM #4
If you dont heat it up, you dont need the clamps. Thats the way truck brake piping is done.
Tobulus
08-18-2016, 08:16 AM #4

If you dont heat it up, you dont need the clamps. Thats the way truck brake piping is done.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)