STD Tuning Engine m pump in 605

m pump in 605

m pump in 605

 
  • 0 Vote(s) - 0 Average
 
gary andrews
4x4 builder

48
01-06-2015, 05:17 PM #1
hi i have just fitted my m pump with 7.5 elements to my 605 but to get it in i had to remove oil cooler and oil fitter housing. so do i need to block the water ways up e.g. core plugs,and the fitter housing do i need to get another one if so off what ? or what is the done thing for to sort these two cheers

discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
gary andrews
01-06-2015, 05:17 PM #1

hi i have just fitted my m pump with 7.5 elements to my 605 but to get it in i had to remove oil cooler and oil fitter housing. so do i need to block the water ways up e.g. core plugs,and the fitter housing do i need to get another one if so off what ? or what is the done thing for to sort these two cheers


discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab

EDH_Performance
Holset

537
01-06-2015, 08:47 PM #2
(01-06-2015, 05:17 PM)gary andrews hi i have just fitted my m pump with 7.5 elements to my 605 but to get it in i had to remove oil cooler and oil fitter housing. so do i need to block the water ways up e.g. core plugs,and the fitter housing do i need to get another one if so off what ? or what is the done thing for to sort these two cheers

You should be able to have the oilcooler there as that motor comes with mechanical m-pump from factoryWink
Maybe you have the om602 mechanical m-pump with the funny lump on the back of the pump?
EDH_Performance
01-06-2015, 08:47 PM #2

(01-06-2015, 05:17 PM)gary andrews hi i have just fitted my m pump with 7.5 elements to my 605 but to get it in i had to remove oil cooler and oil fitter housing. so do i need to block the water ways up e.g. core plugs,and the fitter housing do i need to get another one if so off what ? or what is the done thing for to sort these two cheers

You should be able to have the oilcooler there as that motor comes with mechanical m-pump from factoryWink
Maybe you have the om602 mechanical m-pump with the funny lump on the back of the pump?

gary andrews
4x4 builder

48
01-07-2015, 03:01 AM #3
yes that sounds like the pump i have

discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
gary andrews
01-07-2015, 03:01 AM #3

yes that sounds like the pump i have


discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab

F.R.A.S
Holset

579
01-07-2015, 05:18 AM #4
Cut a flat plate to mount on the back of the pump Smile

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
01-07-2015, 05:18 AM #4

Cut a flat plate to mount on the back of the pump Smile


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

Hario'
C300TD Wagon (W202)

894
01-09-2015, 09:09 AM #5
Got a picture mate??




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
01-09-2015, 09:09 AM #5

Got a picture mate??





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

gary andrews
4x4 builder

48
01-11-2015, 05:05 AM #6
ive blanked the core plugs and fitter housing for now ill use external cooler later ,cheers

discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
gary andrews
01-11-2015, 05:05 AM #6

ive blanked the core plugs and fitter housing for now ill use external cooler later ,cheers


discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab

Druk
Holset

297
01-11-2015, 05:25 AM #7
Are you sure these oilway items aren't full-flow and you'll be starving the bearings of lube?
Druk
01-11-2015, 05:25 AM #7

Are you sure these oilway items aren't full-flow and you'll be starving the bearings of lube?

Hario'
C300TD Wagon (W202)

894
01-12-2015, 11:50 AM #8
Well OM606 uses front mounted oil cooler so for future reference could use a OM606 oil filter housing and connect the two oil fittings together in a loop? Assming it also blocks off the OM605 water fittings in the block?




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
01-12-2015, 11:50 AM #8

Well OM606 uses front mounted oil cooler so for future reference could use a OM606 oil filter housing and connect the two oil fittings together in a loop? Assming it also blocks off the OM605 water fittings in the block?





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

barrote
Superturbo

1,627
01-13-2015, 04:59 PM #9
hy there,
best way of doing: go in a scrap yard buy a oil filter support from a G o M, those come with oil radiator any motor have them, even the sangyoung 4 whellers. 601,2,3,4,5,6 are interchangeable, so anyone goes.
to cover the cyl head holes use expansion taps,(dont know the correct name in english) can buy them from MB or in any automotive retail store.
regards.

FD,
Powered by tractor fuel
barrote
01-13-2015, 04:59 PM #9

hy there,
best way of doing: go in a scrap yard buy a oil filter support from a G o M, those come with oil radiator any motor have them, even the sangyoung 4 whellers. 601,2,3,4,5,6 are interchangeable, so anyone goes.
to cover the cyl head holes use expansion taps,(dont know the correct name in english) can buy them from MB or in any automotive retail store.
regards.


FD,
Powered by tractor fuel

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)