STD Tuning Engine is it possible to make idi OM662 =>> direct injection???

is it possible to make idi OM662 =>> direct injection???

is it possible to make idi OM662 =>> direct injection???

 
  • 0 Vote(s) - 0 Average
 
pmj4147
T04R + TD06

42
08-27-2014, 12:43 PM #1
So the question is,

Is m-pump can be working on direct injected OM602 from sprinter??



thanks for reading.
This post was last modified: 08-27-2014, 12:43 PM by pmj4147.

-------------------------------------------
2002. 09 Ssangyong Musso SUT
OM662STP + 7.5mm + TD06-25G with customized 84mm compressor(2.4Bar)
-------------------------------------------
2002. 12 Ssangyong Korando
OM662LA 2.9ltr + RS191 5.5mm stock
-------------------------------------------
pmj4147
08-27-2014, 12:43 PM #1

So the question is,

Is m-pump can be working on direct injected OM602 from sprinter??



thanks for reading.


-------------------------------------------
2002. 09 Ssangyong Musso SUT
OM662STP + 7.5mm + TD06-25G with customized 84mm compressor(2.4Bar)
-------------------------------------------
2002. 12 Ssangyong Korando
OM662LA 2.9ltr + RS191 5.5mm stock
-------------------------------------------

Stevo-trendy
K26-2

41
08-28-2014, 10:13 AM #2
Wouldent fuel delivery time be to slow if running inline mechanical pump on a direct injection engine ?
Stevo-trendy
08-28-2014, 10:13 AM #2

Wouldent fuel delivery time be to slow if running inline mechanical pump on a direct injection engine ?

uli124125
TA 0301

53
08-28-2014, 03:31 PM #3
oh whom is this incorrect statement?
uli124125
08-28-2014, 03:31 PM #3

oh whom is this incorrect statement?

Stevo-trendy
K26-2

41
08-29-2014, 06:25 AM #4
I stand corrected then I thought bosch Ve pumps flowed higher amounts of fuel then inline injector pumps
Stevo-trendy
08-29-2014, 06:25 AM #4

I stand corrected then I thought bosch Ve pumps flowed higher amounts of fuel then inline injector pumps

barrote
Superturbo

1,627
08-29-2014, 03:41 PM #5
hello there,
it is possible go from IDI to DI, lot of changes have to be done.
at cylinder head, new holes for glow plugs, direct injector holder.
in engine, pistons with combustion chanbers, or DI pistons from other engine.
injection pump, has to be a didicated DI pump, wich a Bosch M it is not, so a Bosch VE is the solution, most bosch VE are electrical so ECU is needed as well and along with all the hardware necessary.
i intend to do something like that, with the remains of a 612 and a 605.
so why not to share some infoWink

FD,
Powered by tractor fuel
barrote
08-29-2014, 03:41 PM #5

hello there,
it is possible go from IDI to DI, lot of changes have to be done.
at cylinder head, new holes for glow plugs, direct injector holder.
in engine, pistons with combustion chanbers, or DI pistons from other engine.
injection pump, has to be a didicated DI pump, wich a Bosch M it is not, so a Bosch VE is the solution, most bosch VE are electrical so ECU is needed as well and along with all the hardware necessary.
i intend to do something like that, with the remains of a 612 and a 605.
so why not to share some infoWink


FD,
Powered by tractor fuel

uli124125
TA 0301

53
08-29-2014, 05:27 PM #6
yes and no MWM oder MAN or such motor or even IHC which are often tuned extremly drive with Inline pump^^
uli124125
08-29-2014, 05:27 PM #6

yes and no MWM oder MAN or such motor or even IHC which are often tuned extremly drive with Inline pump^^

barrote
Superturbo

1,627
08-30-2014, 10:04 AM #7
(08-29-2014, 05:27 PM)uli124125 yes and no MWM oder MAN or such motor or even IHC which are often tuned extremly drive with Inline pump^^
I bet it can be extremely dificult to have a bosch M working with a DI system, it can be done but it wont work as desired.
and if it was posible and feasible MB didn´t had to change to VE in some DI engines Big Grin.

FD,
Powered by tractor fuel
barrote
08-30-2014, 10:04 AM #7

(08-29-2014, 05:27 PM)uli124125 yes and no MWM oder MAN or such motor or even IHC which are often tuned extremly drive with Inline pump^^
I bet it can be extremely dificult to have a bosch M working with a DI system, it can be done but it wont work as desired.
and if it was posible and feasible MB didn´t had to change to VE in some DI engines Big Grin.


FD,
Powered by tractor fuel

Petar
7.5mm M pump

459
08-30-2014, 04:19 PM #8
It might just work with bigger elements ? Blacksmokeracing uses a 8mm M pump for Om606 DI and the old 7mm ford transit elements are made for DI.
Petar
08-30-2014, 04:19 PM #8

It might just work with bigger elements ? Blacksmokeracing uses a 8mm M pump for Om606 DI and the old 7mm ford transit elements are made for DI.

MFSuper90
Budget Builder

1,533
08-31-2014, 09:37 AM #9
There all lots of DI engines with inline pumps. Mostly what is changed is pop pressure in the injectors, but that doesn't change the pump. The same pump for an IDI should work the same for a DI in my thinking.

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
08-31-2014, 09:37 AM #9

There all lots of DI engines with inline pumps. Mostly what is changed is pop pressure in the injectors, but that doesn't change the pump. The same pump for an IDI should work the same for a DI in my thinking.


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

08-31-2014, 11:17 AM #10
If not - there are plenty of mechanical VE pumps for 4, 5 and 6 cylinders from VW engines. IMO DI requires rather short injection time (not timing), at least that's what Dieselmeken wrote somewhere. On the other hand, most commercial DI engines use inline pumps. The'r far of being high reving, high output engines though. There will be a solid reason 290 engine got a VE pump...

____________________________________

'88 300CD Turbo Coupé - OM603
DiseaselWeasel
08-31-2014, 11:17 AM #10

If not - there are plenty of mechanical VE pumps for 4, 5 and 6 cylinders from VW engines. IMO DI requires rather short injection time (not timing), at least that's what Dieselmeken wrote somewhere. On the other hand, most commercial DI engines use inline pumps. The'r far of being high reving, high output engines though. There will be a solid reason 290 engine got a VE pump...


____________________________________

'88 300CD Turbo Coupé - OM603

Petar
7.5mm M pump

459
08-31-2014, 11:38 AM #11
According to bosch books the M pump is not suitable for direct injection.Why ? I have no idea.
I still think that old ford transit 7mm elements would work well for a DI application.
But that same books says that the MW pump is not suitable for IDI and max engine speed of an engine with the MW pump is 2600 rpm Huh and we know it is used on 5000 rpm IDI OM617
[Image: h8DrVHB.png]
Petar
08-31-2014, 11:38 AM #11

According to bosch books the M pump is not suitable for direct injection.Why ? I have no idea.
I still think that old ford transit 7mm elements would work well for a DI application.
But that same books says that the MW pump is not suitable for IDI and max engine speed of an engine with the MW pump is 2600 rpm Huh and we know it is used on 5000 rpm IDI OM617
[Image: h8DrVHB.png]

MFSuper90
Budget Builder

1,533
08-31-2014, 12:17 PM #12
That chart doesn't make much sense to me. It says the MW is only suitable for DI engines.
Interesting chart

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
08-31-2014, 12:17 PM #12

That chart doesn't make much sense to me. It says the MW is only suitable for DI engines.
Interesting chart


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

barrote
Superturbo

1,627
09-01-2014, 08:04 AM #13
yep , i know of a few DI engines with inline pumps, every DI engine in Komatsu heavi equipment has a diesel kiki pump wich is a copy of a P series from bosch, some ford DI aplications in agricultural tractors, use diesel international pumps. jonh deere, Scania, volvo and so on.
do u guys know as well, that DI engines require injection advance during engine RPM range , is it the same as a IDI, it is not and i dont know the diff, !
u guys do know that rotary style pump has the advance inside !
Injector pressure for DI usually is around 400BAR and above, is possible for a m pump produce a injection of that pressure during the amount of time needed for a good operation, i dont know!
those are the considerations that goes in mr Dieselmeken head , or any other person dealing with IP rebuilding and tunning,
one of this days i will try it, i bet it wont work, and i will have to go search for a VE.
regards.

FD,
Powered by tractor fuel
barrote
09-01-2014, 08:04 AM #13

yep , i know of a few DI engines with inline pumps, every DI engine in Komatsu heavi equipment has a diesel kiki pump wich is a copy of a P series from bosch, some ford DI aplications in agricultural tractors, use diesel international pumps. jonh deere, Scania, volvo and so on.
do u guys know as well, that DI engines require injection advance during engine RPM range , is it the same as a IDI, it is not and i dont know the diff, !
u guys do know that rotary style pump has the advance inside !
Injector pressure for DI usually is around 400BAR and above, is possible for a m pump produce a injection of that pressure during the amount of time needed for a good operation, i dont know!
those are the considerations that goes in mr Dieselmeken head , or any other person dealing with IP rebuilding and tunning,
one of this days i will try it, i bet it wont work, and i will have to go search for a VE.
regards.


FD,
Powered by tractor fuel

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)