STD Tuning Engine Electric feed pump pressure!!

Electric feed pump pressure!!

Electric feed pump pressure!!

 
  • 0 Vote(s) - 0 Average
 
pmj4147
T04R + TD06

42
02-28-2014, 01:03 PM #1
Is it okay with over 3bar????

Some says 'no more than 1bar'

and Some says 'okay with over 3bar'



Which one is right????????????

-------------------------------------------
2002. 09 Ssangyong Musso SUT
OM662STP + 7.5mm + TD06-25G with customized 84mm compressor(2.4Bar)
-------------------------------------------
2002. 12 Ssangyong Korando
OM662LA 2.9ltr + RS191 5.5mm stock
-------------------------------------------
pmj4147
02-28-2014, 01:03 PM #1

Is it okay with over 3bar????

Some says 'no more than 1bar'

and Some says 'okay with over 3bar'



Which one is right????????????


-------------------------------------------
2002. 09 Ssangyong Musso SUT
OM662STP + 7.5mm + TD06-25G with customized 84mm compressor(2.4Bar)
-------------------------------------------
2002. 12 Ssangyong Korando
OM662LA 2.9ltr + RS191 5.5mm stock
-------------------------------------------

Duncansport
Holset

526
02-28-2014, 02:18 PM #2
(02-28-2014, 01:03 PM)pmj4147 Is it okay with over 3bar????

Some says 'no more than 1bar'

and Some says 'okay with over 3bar'



Which one is right????????????

I ran mine at 3 bar bellow 1 bar of boost, and 3.5 bar at anything above 1bar of boost.
Duncansport
02-28-2014, 02:18 PM #2

(02-28-2014, 01:03 PM)pmj4147 Is it okay with over 3bar????

Some says 'no more than 1bar'

and Some says 'okay with over 3bar'



Which one is right????????????

I ran mine at 3 bar bellow 1 bar of boost, and 3.5 bar at anything above 1bar of boost.

Sami/B
K26-2

25
03-03-2014, 08:48 AM #3
(02-28-2014, 02:18 PM)Duncansport
(02-28-2014, 01:03 PM)pmj4147 Is it okay with over 3bar????

Some says 'no more than 1bar'

and Some says 'okay with over 3bar'



Which one is right????????????

I ran mine at 3 bar bellow 1 bar of boost, and 3.5 bar at anything above 1bar of boost.


What did you run?
Om60??
?mm IP @ ???CC fuel?
And what feed pump?
How did it run on idle? Does it work OK on a daily driven car?
Interested to know due to about to get my self a feed pump to my daily project Smile
Sami/B
03-03-2014, 08:48 AM #3

(02-28-2014, 02:18 PM)Duncansport
(02-28-2014, 01:03 PM)pmj4147 Is it okay with over 3bar????

Some says 'no more than 1bar'

and Some says 'okay with over 3bar'



Which one is right????????????

I ran mine at 3 bar bellow 1 bar of boost, and 3.5 bar at anything above 1bar of boost.


What did you run?
Om60??
?mm IP @ ???CC fuel?
And what feed pump?
How did it run on idle? Does it work OK on a daily driven car?
Interested to know due to about to get my self a feed pump to my daily project Smile

Duncansport
Holset

526
03-03-2014, 09:10 AM #4
I ran mine at 3 bar bellow 1 bar of boost, and 3.5 bar at anything above 1bar of boost.
[/quote]


What did you run?
Om60??
?mm IP @ ???CC fuel?
And what feed pump?
How did it run on idle? Does it work OK on a daily driven car?
Interested to know due to about to get my self a feed pump to my daily project Smile
[/quote]

I had a om602 (will be used on a OM605 next)
7.5mm 150CC
Bosch 044 pump, with a need tank screen from a gas car as well as a fuel supply hose. Used two Bosch inline fuel filters mounted after the pump.
Ran great at idle, works great on my daily 100 mile commute!

Its very easy to do, the wiring is the most time consuming really.
Duncansport
03-03-2014, 09:10 AM #4

I ran mine at 3 bar bellow 1 bar of boost, and 3.5 bar at anything above 1bar of boost.
[/quote]


What did you run?
Om60??
?mm IP @ ???CC fuel?
And what feed pump?
How did it run on idle? Does it work OK on a daily driven car?
Interested to know due to about to get my self a feed pump to my daily project Smile
[/quote]

I had a om602 (will be used on a OM605 next)
7.5mm 150CC
Bosch 044 pump, with a need tank screen from a gas car as well as a fuel supply hose. Used two Bosch inline fuel filters mounted after the pump.
Ran great at idle, works great on my daily 100 mile commute!

Its very easy to do, the wiring is the most time consuming really.

Sami/B
K26-2

25
03-03-2014, 03:34 PM #5
(03-03-2014, 09:10 AM)Duncansport I ran mine at 3 bar bellow 1 bar of boost, and 3.5 bar at anything above 1bar of boost.


What did you run?
Om60??
?mm IP @ ???CC fuel?
And what feed pump?
How did it run on idle? Does it work OK on a daily driven car?
Interested to know due to about to get my self a feed pump to my daily project Smile
[/quote]

I had a om602 (will be used on a OM605 next)
7.5mm 150CC
Bosch 044 pump, with a need tank screen from a gas car as well as a fuel supply hose. Used two Bosch inline fuel filters mounted after the pump.
Ran great at idle, works great on my daily 100 mile commute!

Its very easy to do, the wiring is the most time consuming really.
[/quote]

Ok, thank you.
The reason i asked is because the remaker of my IP told me that it will run rough with over 1bar at idle.
But you say that i will run nice?
Sami/B
03-03-2014, 03:34 PM #5

(03-03-2014, 09:10 AM)Duncansport I ran mine at 3 bar bellow 1 bar of boost, and 3.5 bar at anything above 1bar of boost.


What did you run?
Om60??
?mm IP @ ???CC fuel?
And what feed pump?
How did it run on idle? Does it work OK on a daily driven car?
Interested to know due to about to get my self a feed pump to my daily project Smile
[/quote]

I had a om602 (will be used on a OM605 next)
7.5mm 150CC
Bosch 044 pump, with a need tank screen from a gas car as well as a fuel supply hose. Used two Bosch inline fuel filters mounted after the pump.
Ran great at idle, works great on my daily 100 mile commute!

Its very easy to do, the wiring is the most time consuming really.
[/quote]

Ok, thank you.
The reason i asked is because the remaker of my IP told me that it will run rough with over 1bar at idle.
But you say that i will run nice?

muuris
OM605

318
03-06-2014, 09:06 AM #6
There's no reason to have high pressures, all you need is flow so IP is topped up all the time. With big lines 0,1bar is enough.
muuris
03-06-2014, 09:06 AM #6

There's no reason to have high pressures, all you need is flow so IP is topped up all the time. With big lines 0,1bar is enough.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)