STD Other FS / WTB / Buying guides 16v Dogleg transmission

16v Dogleg transmission

16v Dogleg transmission

 
  • 0 Vote(s) - 0 Average
 
EmJay
Holset

299
09-30-2013, 11:54 AM #1
Not mine, but figured someone here would appreciate it:

http://forum.190rev.net/showthread.php?4...sion/page2

Location is in Oregon
EmJay
09-30-2013, 11:54 AM #1

Not mine, but figured someone here would appreciate it:

http://forum.190rev.net/showthread.php?4...sion/page2

Location is in Oregon

Druk
Holset

297
09-30-2013, 04:23 PM #2
I couldn't access the link so cant see the advert but remember this trannie has it's own dedicated shifter. A standard merc box shifter wont work.
Druk
09-30-2013, 04:23 PM #2

I couldn't access the link so cant see the advert but remember this trannie has it's own dedicated shifter. A standard merc box shifter wont work.

EmJay
Holset

299
10-01-2013, 01:04 AM #3
It sold.....
EmJay
10-01-2013, 01:04 AM #3

It sold.....

CRD4x4
CompoundSuperTurboDiesel4x4!

399
10-01-2013, 05:12 PM #4
I know its sold but;
Is this MB 16v dogleg the same as a BMW M3 dogleg?

The BMW dogleg transmission is a Getrag 265/5 (265/6 OD).

Just wondering...Huh

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
10-01-2013, 05:12 PM #4

I know its sold but;
Is this MB 16v dogleg the same as a BMW M3 dogleg?

The BMW dogleg transmission is a Getrag 265/5 (265/6 OD).

Just wondering...Huh


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

Hario'
C300TD Wagon (W202)

894
10-01-2013, 06:17 PM #5
I think the dogleg in the 16v merc is from the cosworth 190 IIRC..
My friend HughF on this forum fitted one to his OM606 compound powered 190..




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
10-01-2013, 06:17 PM #5

I think the dogleg in the 16v merc is from the cosworth 190 IIRC..
My friend HughF on this forum fitted one to his OM606 compound powered 190..





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

Druk
Holset

297
10-02-2013, 03:54 AM #6
^ Yup! I've got one behind a 606.962. Bolts straight on.
As I said above it needs it's own matching turret. The levers work differently from the standard 5speed turret.
This post was last modified: 10-02-2013, 03:56 AM by Druk.
Druk
10-02-2013, 03:54 AM #6

^ Yup! I've got one behind a 606.962. Bolts straight on.
As I said above it needs it's own matching turret. The levers work differently from the standard 5speed turret.

CRD4x4
CompoundSuperTurboDiesel4x4!

399
10-02-2013, 09:22 AM #7
Does the Cosworth 190 dogleg 5-speed have a removable bellhousing or is it a 1-piece case?

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
10-02-2013, 09:22 AM #7

Does the Cosworth 190 dogleg 5-speed have a removable bellhousing or is it a 1-piece case?


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

Druk
Holset

297
10-02-2013, 11:20 AM #8
One piece case.
Druk
10-02-2013, 11:20 AM #8

One piece case.

raysorenson
Superturbo

1,162
10-02-2013, 01:47 PM #9
(10-01-2013, 05:12 PM)CRD4x4 I know its sold but;
Is this MB 16v dogleg the same as a BMW M3 dogleg?

The BMW dogleg transmission is a Getrag 265/5 (265/6 OD).

Just wondering...Huh

Yep, same thing, but with a different engine bolt pattern. Good stuff if you don't mind a 1:1 top gear.
raysorenson
10-02-2013, 01:47 PM #9

(10-01-2013, 05:12 PM)CRD4x4 I know its sold but;
Is this MB 16v dogleg the same as a BMW M3 dogleg?

The BMW dogleg transmission is a Getrag 265/5 (265/6 OD).

Just wondering...Huh

Yep, same thing, but with a different engine bolt pattern. Good stuff if you don't mind a 1:1 top gear.

EmJay
Holset

299
10-04-2013, 04:40 PM #10
I got one in my 190 cosworth, it sure helps that little car fly. If something happens to the 16v motor, I'm going to drop a 602 under the hood and have some torquey fun
EmJay
10-04-2013, 04:40 PM #10

I got one in my 190 cosworth, it sure helps that little car fly. If something happens to the 16v motor, I'm going to drop a 602 under the hood and have some torquey fun

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 10 Guest(s)
Users browsing this thread:
 10 Guest(s)