EBay Alert Thread
EBay Alert Thread
10-10-2012, 03:16 PM
#201
BTW -- I am looking for a loaner or something on the super cheaps for a 617 NA intake and exhaust manifold (no EGR deal). I will obviously pay shipping and throw in a free injector service. I am buying a 617 NA car on the 26th of October and I want to clean up and glaze the exhaust manifold and soda blast the intake but I cannot have the car down and out. So, I need a loaner for about 2-3 weeks. Any takers or info appreciated !
There's a burgandy 300 NA with Getrag 717.400 five speed on FleaBay right now. You can buy it for a silly price tag of $14K. I will admit the trans is worth $2K but the car for $14K is nuts ...
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
That car in Utah was yanked off FleaBay. I was the high bidder and the guy sold it locally for $3,000 but I think he let is slip by for a hair lower. It looked like the bidding stopped at around $2,200. Less than 24 hours before it was yanked.
BTW -- I am looking for a loaner or something on the super cheaps for a 617 NA intake and exhaust manifold (no EGR deal). I will obviously pay shipping and throw in a free injector service. I am buying a 617 NA car on the 26th of October and I want to clean up and glaze the exhaust manifold and soda blast the intake but I cannot have the car down and out. So, I need a loaner for about 2-3 weeks. Any takers or info appreciated !
There's a burgandy 300 NA with Getrag 717.400 five speed on FleaBay right now. You can buy it for a silly price tag of $14K. I will admit the trans is worth $2K but the car for $14K is nuts ...
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
10-10-2012, 03:47 PM
#202
I've got a set of manifolds from a '75 N/A 300D that are sitting patiently for me to finish 16 other projects that take priority. I'll happily loan them to you for injector work!
PM me and we'll work out the details.
(10-10-2012, 03:16 PM)Greazzer That car in Utah was yanked off FleaBay. I was the high bidder and the guy sold it locally for $3,000 but I think he let is slip by for a hair lower. It looked like the bidding stopped at around $2,200. Less than 24 hours before it was yanked.
BTW -- I am looking for a loaner or something on the super cheaps for a 617 NA intake and exhaust manifold (no EGR deal). I will obviously pay shipping and throw in a free injector service. I am buying a 617 NA car on the 26th of October and I want to clean up and glaze the exhaust manifold and soda blast the intake but I cannot have the car down and out. So, I need a loaner for about 2-3 weeks. Any takers or info appreciated !
There's a burgandy 300 NA with Getrag 717.400 five speed on FleaBay right now. You can buy it for a silly price tag of $14K. I will admit the trans is worth $2K but the car for $14K is nuts ...
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
I'll jump on that!
I've got a set of manifolds from a '75 N/A 300D that are sitting patiently for me to finish 16 other projects that take priority. I'll happily loan them to you for injector work!
PM me and we'll work out the details.
(10-10-2012, 03:16 PM)Greazzer That car in Utah was yanked off FleaBay. I was the high bidder and the guy sold it locally for $3,000 but I think he let is slip by for a hair lower. It looked like the bidding stopped at around $2,200. Less than 24 hours before it was yanked.
BTW -- I am looking for a loaner or something on the super cheaps for a 617 NA intake and exhaust manifold (no EGR deal). I will obviously pay shipping and throw in a free injector service. I am buying a 617 NA car on the 26th of October and I want to clean up and glaze the exhaust manifold and soda blast the intake but I cannot have the car down and out. So, I need a loaner for about 2-3 weeks. Any takers or info appreciated !
There's a burgandy 300 NA with Getrag 717.400 five speed on FleaBay right now. You can buy it for a silly price tag of $14K. I will admit the trans is worth $2K but the car for $14K is nuts ...
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
10-10-2012, 10:36 PM
#203
(10-10-2012, 03:16 PM)Greazzer ...I am looking for a loaner or something on the super cheaps for a 617 NA intake and exhaust manifold (no EGR deal)...
If you need a naturally-aspirated 1979 W123 300D intake manifold (because that's what you have the air intake to go on), I can loan you one. I don't have a non-turbo 300D exhaust manifold though.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
10-10-2012, 10:36 PM #203(10-10-2012, 03:16 PM)Greazzer ...I am looking for a loaner or something on the super cheaps for a 617 NA intake and exhaust manifold (no EGR deal)...
If you need a naturally-aspirated 1979 W123 300D intake manifold (because that's what you have the air intake to go on), I can loan you one. I don't have a non-turbo 300D exhaust manifold though.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
10-11-2012, 10:55 AM
#204
I did get 2 super-fast responses relative to the manifolds. I think I just really need a loaner or a swapper for the exhaust and even then, I think to save on shipping, the participant will need to ship to the coating place. Once I get it back from the coating place, then I could ship mine to the participant - loaner. Sounds highly convoluted at this juncture ... LOL. I am getting the car on the 26th of October so I will have to see what I go to work with first. Pretty pumped to get off fossil fuels and start burning the grease again. The past year has been a virtual waste of $2K on dino-fuels.
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
It looks like I just really need the exhaust manifold since I can bead blast the intake and install in one day. No biggie there.
I did get 2 super-fast responses relative to the manifolds. I think I just really need a loaner or a swapper for the exhaust and even then, I think to save on shipping, the participant will need to ship to the coating place. Once I get it back from the coating place, then I could ship mine to the participant - loaner. Sounds highly convoluted at this juncture ... LOL. I am getting the car on the 26th of October so I will have to see what I go to work with first. Pretty pumped to get off fossil fuels and start burning the grease again. The past year has been a virtual waste of $2K on dino-fuels.
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
10-17-2012, 06:45 PM
#205
(10-09-2012, 08:45 PM)JustPassinThru W115 300D intake manifold in Arizona:
http://www.ebay.com/itm/290787377485?item=290787377485
Dang... Sold for $204.49....
Gota love Mercedes Diesels!
.
DeliveryValve
10-17-2012, 06:45 PM #205(10-09-2012, 08:45 PM)JustPassinThru W115 300D intake manifold in Arizona:
http://www.ebay.com/itm/290787377485?item=290787377485
Dang... Sold for $204.49....
Gota love Mercedes Diesels!
.
10-17-2012, 08:15 PM
#206
(10-17-2012, 06:45 PM)DeliveryValve(10-09-2012, 08:45 PM)JustPassinThru W115 300D intake manifold in Arizona:
http://www.ebay.com/itm/290787377485?item=290787377485
Dang... Sold for $204.49....
Yes, I see that.
I've got one left. I'll be putting it on eBay in the next few days.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
10-17-2012, 08:15 PM #206(10-17-2012, 06:45 PM)DeliveryValve(10-09-2012, 08:45 PM)JustPassinThru W115 300D intake manifold in Arizona:
http://www.ebay.com/itm/290787377485?item=290787377485
Dang... Sold for $204.49....
Yes, I see that.
I've got one left. I'll be putting it on eBay in the next few days.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
03-11-2013, 10:25 PM
#207
http://r.ebay.com/xBcQJX
" straighten up that star on the grill, assholes."
lgreeley83
03-11-2013, 10:25 PM #207Non egr 617 exhaust manifold.
http://r.ebay.com/xBcQJX
" straighten up that star on the grill, assholes."
03-12-2013, 10:46 AM
#208
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
03-12-2013, 10:46 AM #208Damn missed it
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
03-12-2013, 01:42 PM
#209
A KKK turbo.
http://www.ebay.com/itm/USED-FUEL-INJECT...4e&vxp=mtr
looks like M pump for a 4 cylinder.
This post was last modified: 03-12-2013, 01:43 PM by lgreeley83.
" straighten up that star on the grill, assholes."
lgreeley83
03-12-2013, 01:42 PM #209http://www.ebay.com/itm/1985-Mercedes-30...97&vxp=mtr
A KKK turbo.
http://www.ebay.com/itm/USED-FUEL-INJECT...4e&vxp=mtr
looks like M pump for a 4 cylinder.
" straighten up that star on the grill, assholes."
04-23-2013, 10:21 AM
#210
http://cgi.ebay.com/ebaymotors/1985-Merc...0893336830
Can anyone vet this vehicle?
Check out the seller's tag...
This post was last modified: 04-23-2013, 10:22 AM by squozzer.
Diesel:
79 240D -- auto
Gas/Petrol/Benzin:
02 RAV4 -- daily driver
94 Jetta -- obsolete for 24 HOL -- heading back to the street
85 K5 Blazer -- 377 SBC, 144ci huffer
68 GTO -- slowly rusting in garage
Here's a 300td in my area --
http://cgi.ebay.com/ebaymotors/1985-Merc...0893336830
Can anyone vet this vehicle?
Check out the seller's tag...
Diesel:
79 240D -- auto
Gas/Petrol/Benzin:
02 RAV4 -- daily driver
94 Jetta -- obsolete for 24 HOL -- heading back to the street
85 K5 Blazer -- 377 SBC, 144ci huffer
68 GTO -- slowly rusting in garage
09-29-2013, 03:31 PM
#211
5 speed transmission
http://www.ebay.com/itm/Mercedes-5-Speed...a4&vxp=mtr
Purplecomputer
09-29-2013, 03:31 PM #211Found this
5 speed transmission
http://www.ebay.com/itm/Mercedes-5-Speed...a4&vxp=mtr
10-02-2013, 06:07 PM
#212
(09-29-2013, 03:31 PM)Purplecomputer Found this
5 speed transmission
http://www.ebay.com/itm/Mercedes-5-Speed...a4&vxp=mtr
Its for a gasser I believe
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
10-02-2013, 06:07 PM #212(09-29-2013, 03:31 PM)Purplecomputer Found this
5 speed transmission
http://www.ebay.com/itm/Mercedes-5-Speed...a4&vxp=mtr
Its for a gasser I believe
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
10-02-2013, 06:48 PM
#213
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
Yeah starter is on the wrong side
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
10-09-2013, 02:11 AM
#214
http://www.ebay.com/itm/1973-MERCEDES-10...2675300%26
.
Gota love Mercedes Diesels!
.
DeliveryValve
10-09-2013, 02:11 AM #214107 shell in Chicagoland. Cheap starting bid at $80.
http://www.ebay.com/itm/1973-MERCEDES-10...2675300%26
.
Gota love Mercedes Diesels!
.
10-09-2013, 10:00 AM
#215
(10-02-2013, 06:07 PM)sassparilla_kid(09-29-2013, 03:31 PM)Purplecomputer Found this
5 speed transmission
http://www.ebay.com/itm/Mercedes-5-Speed...a4&vxp=mtr
Its for a gasser I believe
That would work if are swapping to an om603 or om606
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
10-09-2013, 10:00 AM #215(10-02-2013, 06:07 PM)sassparilla_kid(09-29-2013, 03:31 PM)Purplecomputer Found this
5 speed transmission
http://www.ebay.com/itm/Mercedes-5-Speed...a4&vxp=mtr
Its for a gasser I believe
That would work if are swapping to an om603 or om606
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
11-14-2014, 07:16 PM
#217
Would be cool to have with flywheel and clutch.
raysorenson
11-14-2014, 07:16 PM #217http://www.ebay.com/itm/MERCEDES-R129-5-...1481621168
Would be cool to have with flywheel and clutch.
11-15-2014, 08:16 AM
#218
(11-14-2014, 07:16 PM)raysorenson http://www.ebay.com/itm/MERCEDES-R129-5-...1481621168
Would be cool to have with flywheel and clutch.
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
Would that shift pattern be considered "dogleg"?
(11-14-2014, 07:16 PM)raysorenson http://www.ebay.com/itm/MERCEDES-R129-5-...1481621168
Would be cool to have with flywheel and clutch.
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
11-15-2014, 09:04 AM
#219
raysorenson
11-15-2014, 09:04 AM #219Yeah, dogleg w/no overdrive, same as the 190e trans except it's almost certainly got a dual mass FW and bigger output flange for larger diameter flex disc. I'd prefer this over my 717.404, but I'm happy enough and I just rebuilt mine anyway.
11-25-2014, 08:54 AM
#220
I was gonna buy but found a complete 98 e300 diesel
This post was last modified: 11-25-2014, 08:58 AM by Insane190d.
Insane190d
11-25-2014, 08:54 AM #220Anyone see this.. he will take 1600$
I was gonna buy but found a complete 98 e300 diesel
11-25-2014, 09:11 AM
#221
Why would anyone pay that much, especially for an engine sitting outside! Any proof of mileage?
Insane190d, did you find a turbo E300? You see my craigslist posts?
(11-25-2014, 08:54 AM)Insane190d Anyone see this.. he will take 1600$
I was gonna buy but found a complete 98 e300 diesel
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
That's crazy!!
Why would anyone pay that much, especially for an engine sitting outside! Any proof of mileage?
Insane190d, did you find a turbo E300? You see my craigslist posts?
(11-25-2014, 08:54 AM)Insane190d Anyone see this.. he will take 1600$
I was gonna buy but found a complete 98 e300 diesel
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
11-25-2014, 09:15 AM
#222
(11-25-2014, 09:11 AM)CRD4x4 That's crazy!!
Why would anyone pay that much, especially for an engine sitting outside! Any proof of mileage?
Insane190d, did you find a turbo E300? You see my craigslist posts?
(11-25-2014, 08:54 AM)Insane190d Anyone see this.. he will take 1600$
I was gonna buy but found a complete 98 e300 diesel
That was my problem, outside with no injectors in it...
Yea I did, I found a 98 e300 turbo diesel complete runs great with 216,000 miles has body rot 1700$!! Not a bad find at all
originally asking 4600$
Insane190d
11-25-2014, 09:15 AM #222(11-25-2014, 09:11 AM)CRD4x4 That's crazy!!
Why would anyone pay that much, especially for an engine sitting outside! Any proof of mileage?
Insane190d, did you find a turbo E300? You see my craigslist posts?
(11-25-2014, 08:54 AM)Insane190d Anyone see this.. he will take 1600$
I was gonna buy but found a complete 98 e300 diesel
That was my problem, outside with no injectors in it...
Yea I did, I found a 98 e300 turbo diesel complete runs great with 216,000 miles has body rot 1700$!! Not a bad find at all
originally asking 4600$
04-23-2015, 04:19 PM
#223
http://www.ebay.com/itm/Eaton-M90-superc...cf&vxp=mtr
Holset HE341
http://www.ebay.com/itm/Holset-HE341-HY3...43&vxp=mtr
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
04-23-2015, 04:19 PM #223Eaton M90 supercharger, the "short snout" version from a Jaguar
http://www.ebay.com/itm/Eaton-M90-superc...cf&vxp=mtr
Holset HE341
http://www.ebay.com/itm/Holset-HE341-HY3...43&vxp=mtr
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
04-23-2015, 07:16 PM
#224
(04-23-2015, 04:19 PM)led-panzer Eaton M90 supercharger, the "short snout" version from a Jaguar
http://www.ebay.com/itm/Eaton-M90-superc...cf&vxp=mtr
Holset HE341
http://www.ebay.com/itm/Holset-HE341-HY3...43&vxp=mtr
Any discounts for std members? Taking trades partial or full?
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
(04-23-2015, 04:19 PM)led-panzer Eaton M90 supercharger, the "short snout" version from a Jaguar
http://www.ebay.com/itm/Eaton-M90-superc...cf&vxp=mtr
Holset HE341
http://www.ebay.com/itm/Holset-HE341-HY3...43&vxp=mtr
Any discounts for std members? Taking trades partial or full?
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
04-23-2015, 07:47 PM
#225
Trades, no sorry. I'm racking up a bill at F-tune performance. Hoping to pay it with money my wife doesn't know about
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
04-23-2015, 07:47 PM #225Discounts for STD members, yes. Don't want to commit to a specific amount, as it's an auction.
Trades, no sorry. I'm racking up a bill at F-tune performance. Hoping to pay it with money my wife doesn't know about
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
04-24-2015, 05:34 AM
#226
(04-23-2015, 07:47 PM)led-panzer Discounts for STD members, yes. Don't want to commit to a specific amount, as it's an auction.
Trades, no sorry. I'm racking up a bill at F-tune performance. Hoping to pay it with money my wife doesn't know about
Man i totally feel you there, Fred is a very convincing guy
Luckily i dont have a wife to answer to yet haha.
GLWS, that M90 would be super fun to play around with.
(04-23-2015, 07:47 PM)led-panzer Discounts for STD members, yes. Don't want to commit to a specific amount, as it's an auction.
Trades, no sorry. I'm racking up a bill at F-tune performance. Hoping to pay it with money my wife doesn't know about
Man i totally feel you there, Fred is a very convincing guy
Luckily i dont have a wife to answer to yet haha.
GLWS, that M90 would be super fun to play around with.
07-11-2015, 05:04 PM
#227
Selling my W115 Intake Manifold. Free shipping for forum members. No reserve!!
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
07-11-2015, 05:04 PM #227http://www.ebay.com/itm/261964006908?ssP...1555.l2649
Selling my W115 Intake Manifold. Free shipping for forum members. No reserve!!
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
08-13-2015, 06:41 AM
#228
Insane190d
08-13-2015, 06:41 AM #2285 cylinder super pump and half ass welded bmw merc transmission. On ebay uk.
09-14-2015, 08:47 AM
#229
http://m.ebay.com/itm/Ford-Mustang-GT500...nav=SEARCH
I always say I have no association with seller but this time I stand behind him 100%!
2010 Ford Mustang Shelby GT500 - 14k miles, manual trans, original owner (very good friend) $36k
http://m.ebay.com/itm/Ford-Mustang-GT500...nav=SEARCH
I always say I have no association with seller but this time I stand behind him 100%!
01-16-2017, 07:28 PM
#230
http://www.ebay.com/itm/262809549477?ssP...1555.l2649
These are mine, contact me through here (or tell me on ebay you're from here) and I'll give you a better deal - especially if you buy both.
ak47is1337
01-16-2017, 07:28 PM #230http://www.ebay.com/itm/262809557730?ssP...1555.l2649
http://www.ebay.com/itm/262809549477?ssP...1555.l2649
These are mine, contact me through here (or tell me on ebay you're from here) and I'll give you a better deal - especially if you buy both.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)