STD Tuning Drivetrain w210 diff change.

w210 diff change.

w210 diff change.

 
  • 0 Vote(s) - 0 Average
 
w210tdt
K26-2

31
11-24-2012, 09:28 AM #1
diff question for you guys!
i`m planning to change the diff in my w210 e230 (om606-converted).
it has a 3,46 ratio ,and im trying get a hold of something lower.2,65/2,88.does anyone know if a w124 diff will fit in this car?
the 3,46 diff measures 22cm between the driveshaft flanges..
w210tdt
11-24-2012, 09:28 AM #1

diff question for you guys!
i`m planning to change the diff in my w210 e230 (om606-converted).
it has a 3,46 ratio ,and im trying get a hold of something lower.2,65/2,88.does anyone know if a w124 diff will fit in this car?
the 3,46 diff measures 22cm between the driveshaft flanges..

EDH_Performance
Holset

537
11-24-2012, 01:05 PM #2
(11-24-2012, 09:28 AM)w210tdt diff question for you guys!
i`m planning to change the diff in my w210 e230 (om606-converted).
it has a 3,46 ratio ,and im trying get a hold of something lower.2,65/2,88.does anyone know if a w124 diff will fit in this car?
the 3,46 diff measures 22cm between the driveshaft flanges..

I do not think it will be bolt on! The 210mm is very bigBig Grin Have one with 2,2 ratioSmile Planning to use in my 190d superturbo projectWink
EDH_Performance
11-24-2012, 01:05 PM #2

(11-24-2012, 09:28 AM)w210tdt diff question for you guys!
i`m planning to change the diff in my w210 e230 (om606-converted).
it has a 3,46 ratio ,and im trying get a hold of something lower.2,65/2,88.does anyone know if a w124 diff will fit in this car?
the 3,46 diff measures 22cm between the driveshaft flanges..

I do not think it will be bolt on! The 210mm is very bigBig Grin Have one with 2,2 ratioSmile Planning to use in my 190d superturbo projectWink

w210tdt
K26-2

31
11-24-2012, 01:35 PM #3
(11-24-2012, 01:05 PM)EDH_Performance
(11-24-2012, 09:28 AM)w210tdt diff question for you guys!
i`m planning to change the diff in my w210 e230 (om606-converted).
it has a 3,46 ratio ,and im trying get a hold of something lower.2,65/2,88.does anyone know if a w124 diff will fit in this car?
the 3,46 diff measures 22cm between the driveshaft flanges..

I do not think it will be bolt on! The 210mm is very bigBig Grin Have one with 2,2 ratioSmile Planning to use in my 190d superturbo projectWink

So the 210mm diffs Are the ones with low gear ratio?and my 3,46 is 185mm then?

2,20 sounds Nice ,planning to go 300km/h in your 190? Smile
This post was last modified: 11-24-2012, 01:41 PM by w210tdt.
w210tdt
11-24-2012, 01:35 PM #3

(11-24-2012, 01:05 PM)EDH_Performance
(11-24-2012, 09:28 AM)w210tdt diff question for you guys!
i`m planning to change the diff in my w210 e230 (om606-converted).
it has a 3,46 ratio ,and im trying get a hold of something lower.2,65/2,88.does anyone know if a w124 diff will fit in this car?
the 3,46 diff measures 22cm between the driveshaft flanges..

I do not think it will be bolt on! The 210mm is very bigBig Grin Have one with 2,2 ratioSmile Planning to use in my 190d superturbo projectWink

So the 210mm diffs Are the ones with low gear ratio?and my 3,46 is 185mm then?

2,20 sounds Nice ,planning to go 300km/h in your 190? Smile

EDH_Performance
Holset

537
11-24-2012, 01:58 PM #4
(11-24-2012, 01:35 PM)w210tdt
(11-24-2012, 01:05 PM)EDH_Performance
(11-24-2012, 09:28 AM)w210tdt diff question for you guys!
i`m planning to change the diff in my w210 e230 (om606-converted).
it has a 3,46 ratio ,and im trying get a hold of something lower.2,65/2,88.does anyone know if a w124 diff will fit in this car?
the 3,46 diff measures 22cm between the driveshaft flanges..

I do not think it will be bolt on! The 210mm is very bigBig Grin Have one with 2,2 ratioSmile Planning to use in my 190d superturbo projectWink

So the 210mm diffs Are the ones with low gear ratio?and my 3,46 is 185mm then?

2,20 sounds Nice ,planning to go 300km/h in your 190? Smile
I think you can get it with high ratios as wellSmile Yes, theoretical top speed at 360km/h !!
EDH_Performance
11-24-2012, 01:58 PM #4

(11-24-2012, 01:35 PM)w210tdt
(11-24-2012, 01:05 PM)EDH_Performance
(11-24-2012, 09:28 AM)w210tdt diff question for you guys!
i`m planning to change the diff in my w210 e230 (om606-converted).
it has a 3,46 ratio ,and im trying get a hold of something lower.2,65/2,88.does anyone know if a w124 diff will fit in this car?
the 3,46 diff measures 22cm between the driveshaft flanges..

I do not think it will be bolt on! The 210mm is very bigBig Grin Have one with 2,2 ratioSmile Planning to use in my 190d superturbo projectWink

So the 210mm diffs Are the ones with low gear ratio?and my 3,46 is 185mm then?

2,20 sounds Nice ,planning to go 300km/h in your 190? Smile
I think you can get it with high ratios as wellSmile Yes, theoretical top speed at 360km/h !!

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)