Inj Pumps
Inj Pumps
Doing some research on increasing power on my 83 300d, and like most diesel engines tweaking the pump seems to be a common practice. Lots of talk about the M pump, but trying to find one seems to be very difficult, so wondering what can be done to the stock pump.
thanks for taking the time to read this - look forward to your input
http://www.superturbodiesel.com/std/thread-189.html
This thread seems to be aimed at both mw and m pumps...
Take it easy, and take youre time, and read it all..
Sort out what seems to fit you're pump, take notes, and tune it
If you're confused, this might be the right place to ask for the right way, but read the guide, and try to sort it out for you're self first
I made it, so anybody should be able to do it, with a little focus, willpower and the right attitude, you'll be there in a jiffy! Good luck
(05-28-2012, 03:15 PM)bad3gakk http://www.superturbodiesel.com/std/thread-189.html
This thread seems to be aimed at both mw and m pumps...
Take it easy, and take youre time, and read it all..
Sort out what seems to fit you're pump, take notes, and tune it
If you're confused, this might be the right place to ask for the right way, but read the guide, and try to sort it out for you're self first
I made it, so anybody should be able to do it, with a little focus, willpower and the right attitude, you'll be there in a jiffy! Good luck
(05-28-2012, 03:15 PM)bad3gakk http://www.superturbodiesel.com/std/thread-189.html
This thread seems to be aimed at both mw and m pumps...
Take it easy, and take youre time, and read it all..
Sort out what seems to fit you're pump, take notes, and tune it
If you're confused, this might be the right place to ask for the right way, but read the guide, and try to sort it out for you're self first
I made it, so anybody should be able to do it, with a little focus, willpower and the right attitude, you'll be there in a jiffy! Good luck
https://docs.google.com/document/d/1QkAv...y=CJXuhs0I
try this one same thing but hope it works
https://docs.google.com/document/d/1QkAv...hs0I&pli=1
ok this really should work. I'am better at engines then internet.
(05-28-2012, 07:56 PM)83300d South of Lethbridge - 20km from the American border. You?
Medicine Hat, I have tomnik's 6.5mm elements in my MW pump. I have a Mercedes G Wagen that I go out to crows nest pass with.
Ronnie it says invalid document
I adjusted my M pump 2 rounds, and it made quite a big difference
I didnt remove my alda, i just turned it a few rounds in
Adjusting the rack limiter and such, is not for me, since i didnt feel enough compitent to do so, and wanted to get advice from an experienced friend of mine, but bought a 8mm herlevi pump instead
(05-29-2012, 02:52 AM)83300d Would love to hear more about the elements and your car sometime. Well have to get together over a wobbly pop or something. I work out in BC so maybe meet at Rum Runners!