STD Other FS / WTB / Buying guides 4 speed manual set-up

4 speed manual set-up

4 speed manual set-up

 
  • 0 Vote(s) - 0 Average
 
Greazzer
Superturbo

1,278
11-28-2011, 12:50 PM #1
Just checking to see what the interest is out there.I paid $500.00 for the entire set-up and I know that the shipping for the entire set up is about $150.00. I would be willing to sell it for what I paid for it.

I have a 4 speed manual trans that was designed originally for the 300D --EG 3.0 liter OM617.9XX engine.

This would include original, OEM shift rods (not cut and threaded ones being adapted), the trans cross member (no fab needed), and correct from the factory drive shaft (just the front smaller piece), and the trans., and other miscell pieces that I got. I have had it about 2 months, but my car got totaled, but I have a lead on something else.

Just seeing what the interest is out there.

I am keeping my fingers crossed that Santa will pay me a visit with my tranny super wish !!!!

PM if anyone is interested. I got this off the PP forum, manys' favorite forum out there. LOL. It is sitll in the box, never used.

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
11-28-2011, 12:50 PM #1

Just checking to see what the interest is out there.I paid $500.00 for the entire set-up and I know that the shipping for the entire set up is about $150.00. I would be willing to sell it for what I paid for it.

I have a 4 speed manual trans that was designed originally for the 300D --EG 3.0 liter OM617.9XX engine.

This would include original, OEM shift rods (not cut and threaded ones being adapted), the trans cross member (no fab needed), and correct from the factory drive shaft (just the front smaller piece), and the trans., and other miscell pieces that I got. I have had it about 2 months, but my car got totaled, but I have a lead on something else.

Just seeing what the interest is out there.

I am keeping my fingers crossed that Santa will pay me a visit with my tranny super wish !!!!

PM if anyone is interested. I got this off the PP forum, manys' favorite forum out there. LOL. It is sitll in the box, never used.


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

garage
Bush Taxi

893
11-28-2011, 03:19 PM #2
Oh wow...i WISH i could buy this setup.
Lucky guy to own this..

1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
garage
11-28-2011, 03:19 PM #2

Oh wow...i WISH i could buy this setup.
Lucky guy to own this..


1987 300D: EGR Delete, ARV Delete, Cold Air Intake...

sassparilla_kid
diesel > all other fuels

1,618
11-29-2011, 01:37 AM #3
I woule be interested except california is a long way from south carolina, and most of my spending money just went towards a new gun safe last week Wink

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
11-29-2011, 01:37 AM #3

I woule be interested except california is a long way from south carolina, and most of my spending money just went towards a new gun safe last week Wink


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

Greazzer
Superturbo

1,278
11-29-2011, 07:31 AM #4
This Transmission set up came from California -- actually ,the LA terminal -- LOL. It may be going back home.

Let me know. Greyhound was $100 or so. I will have to check the receipt.

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
11-29-2011, 07:31 AM #4

This Transmission set up came from California -- actually ,the LA terminal -- LOL. It may be going back home.

Let me know. Greyhound was $100 or so. I will have to check the receipt.


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

sassparilla_kid
diesel > all other fuels

1,618
11-29-2011, 04:15 PM #5
Hmmm my transmission has shifted hard on 3-4 since I got the car (5 years?) and is now starting to flare on 3-4, any idea how difficult this would be to install?

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
11-29-2011, 04:15 PM #5

Hmmm my transmission has shifted hard on 3-4 since I got the car (5 years?) and is now starting to flare on 3-4, any idea how difficult this would be to install?


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

willbhere4u
Six in a row make her go!

2,507
11-29-2011, 05:18 PM #6
Being that it was originally for a 300d 617 5 cylinder it should be the simplest option and extremely rare!

300d with factory 4 spds are rare as hens teeth

Most people have modified 240d setups witch have to get custom shift rods and cross members not to mention the 300d flywheels are heaver than the 240d so it wont have as many vibration issues

If you want a 4spd manual 300d this is defiantly the way to goBig Grin
This post was last modified: 11-29-2011, 05:19 PM by willbhere4u.

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
11-29-2011, 05:18 PM #6

Being that it was originally for a 300d 617 5 cylinder it should be the simplest option and extremely rare!

300d with factory 4 spds are rare as hens teeth

Most people have modified 240d setups witch have to get custom shift rods and cross members not to mention the 300d flywheels are heaver than the 240d so it wont have as many vibration issues

If you want a 4spd manual 300d this is defiantly the way to goBig Grin


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

garage
Bush Taxi

893
11-29-2011, 06:47 PM #7
I would buy it if i could.
I strongly urge you to buy this if you want a om617 with a 4speed stick behind it.

Greazzer, curious as to if this "kit" comes with the clutch pedel assembly and whatnot?

1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
garage
11-29-2011, 06:47 PM #7

I would buy it if i could.
I strongly urge you to buy this if you want a om617 with a 4speed stick behind it.

Greazzer, curious as to if this "kit" comes with the clutch pedel assembly and whatnot?


1987 300D: EGR Delete, ARV Delete, Cold Air Intake...

sassparilla_kid
diesel > all other fuels

1,618
11-29-2011, 06:51 PM #8
PM sent

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
11-29-2011, 06:51 PM #8

PM sent


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

Greazzer
Superturbo

1,278
11-29-2011, 08:56 PM #9
Hey guys,

Yes, clutch pedal assembly is included. The only thing NOT included is the maintance items, EG clutch kit. BUT, it's all there and NO fabrications needed, that is the rods are there, the trans crossmember (or whatever you call it), driveshaft front piece (no welding), et cet. The only major item I did not get was the FW in the kit. I will get some pictures together by the weekend. Sorry for the delays, it's just working 14+ hours, getting home late, and I am already taking 10+ pictures a night for other parts that I am selling, but I am not overall happy with my pictures, but that is what I get for rushing around.

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
11-29-2011, 08:56 PM #9

Hey guys,

Yes, clutch pedal assembly is included. The only thing NOT included is the maintance items, EG clutch kit. BUT, it's all there and NO fabrications needed, that is the rods are there, the trans crossmember (or whatever you call it), driveshaft front piece (no welding), et cet. The only major item I did not get was the FW in the kit. I will get some pictures together by the weekend. Sorry for the delays, it's just working 14+ hours, getting home late, and I am already taking 10+ pictures a night for other parts that I am selling, but I am not overall happy with my pictures, but that is what I get for rushing around.


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

sassparilla_kid
diesel > all other fuels

1,618
11-30-2011, 12:54 AM #10
Working is no bueno, my goal is to strike it rich at the casino down the street from where I work!! Until then I'll continue making/delivering pizzas until something more lucrative comes up haha

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
11-30-2011, 12:54 AM #10

Working is no bueno, my goal is to strike it rich at the casino down the street from where I work!! Until then I'll continue making/delivering pizzas until something more lucrative comes up haha


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

mike-81-240d
more like mike-84-300d now

427
11-30-2011, 04:18 AM #11
So no 300D flywheel?

1981 Mercedes 300TD Lowered 4 speed manual Holset HX30 
mike-81-240d
11-30-2011, 04:18 AM #11

So no 300D flywheel?


1981 Mercedes 300TD Lowered 4 speed manual Holset HX30 

Greazzer
Superturbo

1,278
11-30-2011, 07:38 AM #12
no 300D flywheel. Was not part of the kit / set up i bought. A 240D flywheel will work I am told.

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
11-30-2011, 07:38 AM #12

no 300D flywheel. Was not part of the kit / set up i bought. A 240D flywheel will work I am told.


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)