STD Tuning Engine Coolant pipe with euro manifold 603

Coolant pipe with euro manifold 603

Coolant pipe with euro manifold 603

 
  • 0 Vote(s) - 0 Average
 
winmutt
bitbanger

3,468
08-14-2011, 07:33 AM #1
Anyone have a fix for this? Is there a 606 part or 126/140 pipe that works?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
08-14-2011, 07:33 AM #1

Anyone have a fix for this? Is there a 606 part or 126/140 pipe that works?


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

aaa
GT2256V

913
08-14-2011, 07:47 AM #2
The 126 pipe won't work very well.There was a thread on PP a while back that didn't seem to yield much... here.
This post was last modified: 08-14-2011, 07:51 AM by aaa.
aaa
08-14-2011, 07:47 AM #2

The 126 pipe won't work very well.There was a thread on PP a while back that didn't seem to yield much... here.

iheartboost
Holset

422
08-14-2011, 11:10 AM #3
ive always been a fan of flexible lines. so maybe thats an option for you?

i know when i get on my way for the power aspect of my car there will be no custom bent oil or coolant lines. ill just use braided or something similar.
This post was last modified: 08-14-2011, 11:11 AM by iheartboost.

1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car

iheartboost
08-14-2011, 11:10 AM #3

ive always been a fan of flexible lines. so maybe thats an option for you?

i know when i get on my way for the power aspect of my car there will be no custom bent oil or coolant lines. ill just use braided or something similar.


1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car

winmutt
bitbanger

3,468
08-14-2011, 02:37 PM #4
(08-14-2011, 07:47 AM)aaa The 126 pipe won't work very well.There was a thread on PP a while back that didn't seem to yield much... here.

I'll talk to rusty and see if he can send me some EPC pics...

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
08-14-2011, 02:37 PM #4

(08-14-2011, 07:47 AM)aaa The 126 pipe won't work very well.There was a thread on PP a while back that didn't seem to yield much... here.

I'll talk to rusty and see if he can send me some EPC pics...


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

jonbobshinigin
Holset

292
08-16-2011, 09:54 AM #5
I believe that there is a pipe off of an om602 that you actually need. I will see if I can find out the information I likely stored somewhere and forget I did it.

1987 300TDT - 260,000 Miles
>>275HP OM603 Project Profile here<<

jonbobshinigin
08-16-2011, 09:54 AM #5

I believe that there is a pipe off of an om602 that you actually need. I will see if I can find out the information I likely stored somewhere and forget I did it.


1987 300TDT - 260,000 Miles
>>275HP OM603 Project Profile here<<

300D50
Graphite Moderator, ala RBMK

775
08-16-2011, 11:06 AM #6
Is it something you could make out of a strip of hobby-shop brass/aluminum sheet, some pipe fittings, and time?

1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
300D50
08-16-2011, 11:06 AM #6

Is it something you could make out of a strip of hobby-shop brass/aluminum sheet, some pipe fittings, and time?


1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.

winmutt
bitbanger

3,468
08-16-2011, 01:11 PM #7
Its the 602 tube. The problem is the bracket keeps the tube compression fitted into the tstat housing. There is a oring on the end to keep it from leaking. Im sure I can find a 602 tube somewhere. If by some miracle I have everything else done by this weekend I'll consider just using what I have and clamping it off until I can get the right part.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
08-16-2011, 01:11 PM #7

Its the 602 tube. The problem is the bracket keeps the tube compression fitted into the tstat housing. There is a oring on the end to keep it from leaking. Im sure I can find a 602 tube somewhere. If by some miracle I have everything else done by this weekend I'll consider just using what I have and clamping it off until I can get the right part.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)