STD Tuning Engine iol pan?

iol pan?

iol pan?

 
  • 0 Vote(s) - 0 Average
 
giezy
K26-2

48
05-20-2010, 07:18 PM #1
has any one or donea oil pan swap to make it a rear sump?i got a hold of a really nice 1986 fithavenue wiyh a bad motor but the are rea sump would like to through a 617 in it but the pan is the hold up
giezy
05-20-2010, 07:18 PM #1

has any one or donea oil pan swap to make it a rear sump?i got a hold of a really nice 1986 fithavenue wiyh a bad motor but the are rea sump would like to through a 617 in it but the pan is the hold up

Biohazard
Smokin like a champ!

376
05-20-2010, 08:33 PM #2
Havent done a pan swap, but my dad and I are (slowly) working on a 617 swap into his 64 Dart GT. We're having close to the same problem with oil pan location. Our plan is to just weld in a new crossmember then cut the old one out. Let us know if you find something that will work though. I believe there is another member working on something similar here:

http://www.superturbodiesel.com/std/oil-...-1362.html

Just remembered he's trying to move the sump a little, not move it to the other side. Hope it helps though.

82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.

84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine! 
Biohazard
05-20-2010, 08:33 PM #2

Havent done a pan swap, but my dad and I are (slowly) working on a 617 swap into his 64 Dart GT. We're having close to the same problem with oil pan location. Our plan is to just weld in a new crossmember then cut the old one out. Let us know if you find something that will work though. I believe there is another member working on something similar here:

http://www.superturbodiesel.com/std/oil-...-1362.html

Just remembered he's trying to move the sump a little, not move it to the other side. Hope it helps though.


82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.

84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine! 

ForcedInduction
Banned

3,628
05-21-2010, 05:38 AM #3
It can't be done unless you use an external dry-sump style oil pump.
ForcedInduction
05-21-2010, 05:38 AM #3

It can't be done unless you use an external dry-sump style oil pump.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)