STD Tuning Engine Need help finding parts!

Need help finding parts!

Need help finding parts!

 
  • 0 Vote(s) - 0 Average
 
TotalDiesel
Unregistered

 
04-03-2010, 02:06 PM #1
Hey. I am looking for a "New" exhaust manifold Flex pipe for an OM603 engine. the flex tube I am talking about is the piece which connects the first two cylinders exhaust manifold to the other half. There is also a metal spacer which is supposed to be inside the flex tube. I need to get the clamps for it too. I have gone to 3 mercedes repair shops and 2 dealers and no one can get me one. And i couldnt find the part on any of the mercedes parts sites I know. I am very frustrated because I am supposed to be repairing my friends car asap and this part has got me stuck... The original one cracked in two places so its garbage. If someone could please help me find these parts online or from a dealer the effort would be appreciated.

Thanks,

Jon
TotalDiesel
04-03-2010, 02:06 PM #1

Hey. I am looking for a "New" exhaust manifold Flex pipe for an OM603 engine. the flex tube I am talking about is the piece which connects the first two cylinders exhaust manifold to the other half. There is also a metal spacer which is supposed to be inside the flex tube. I need to get the clamps for it too. I have gone to 3 mercedes repair shops and 2 dealers and no one can get me one. And i couldnt find the part on any of the mercedes parts sites I know. I am very frustrated because I am supposed to be repairing my friends car asap and this part has got me stuck... The original one cracked in two places so its garbage. If someone could please help me find these parts online or from a dealer the effort would be appreciated.

Thanks,

Jon

Einar
GT2256V

118
04-03-2010, 03:39 PM #2
[Image: 79-100_m.jpg]
[Image: 79-2332_m.jpg]

Maybe you could use something like this.

[Image: 79-121_m.jpg]
This I think will be too long.

I`m sorry, I can`t help You with som Links Since I`m in Norway, and you probably not.
Einar
04-03-2010, 03:39 PM #2

[Image: 79-100_m.jpg]
[Image: 79-2332_m.jpg]

Maybe you could use something like this.

[Image: 79-121_m.jpg]
This I think will be too long.

I`m sorry, I can`t help You with som Links Since I`m in Norway, and you probably not.

Rudolf_Diesel
Ask me if I care...

579
04-03-2010, 03:50 PM #3
Try these guys:

http://sunvalleymercedes.com/

1982 300SD: 304,xxx Super M-pump with 7.5mm elements, 265 Nozzles, GT35 water cooled turbo, M90 Supercharger, A/W Intercooler, Serpentine drive belt, 3" SS exhaust with Magnaflow muffler, 240 breather, AEM dry Filter, Manual Boost Control, EGT / Boost / EMP gauges....Moved on to other projects

1995 F-350 7.3L PSD: 230,xxx 6.0 IC, DIY Stage 1 Injectors, 17* hpop, Tony Wildman Chip, John Wood Trans, 6.4L TC, 3" down pipe, 4" straight exhaust, 310 HP on wheel dyno - 8500# dually: 0-60 in 6.98

Suzuki Samurai: VW 1.9L TD, Trackick doubler transfer case (made by me) 5.8:1 transfer case gears, YJ springs front and rear with rear missing links, wheel base extended 14", diffs welded, some day a VNT.
Rudolf_Diesel
04-03-2010, 03:50 PM #3

Try these guys:

http://sunvalleymercedes.com/


1982 300SD: 304,xxx Super M-pump with 7.5mm elements, 265 Nozzles, GT35 water cooled turbo, M90 Supercharger, A/W Intercooler, Serpentine drive belt, 3" SS exhaust with Magnaflow muffler, 240 breather, AEM dry Filter, Manual Boost Control, EGT / Boost / EMP gauges....Moved on to other projects

1995 F-350 7.3L PSD: 230,xxx 6.0 IC, DIY Stage 1 Injectors, 17* hpop, Tony Wildman Chip, John Wood Trans, 6.4L TC, 3" down pipe, 4" straight exhaust, 310 HP on wheel dyno - 8500# dually: 0-60 in 6.98

Suzuki Samurai: VW 1.9L TD, Trackick doubler transfer case (made by me) 5.8:1 transfer case gears, YJ springs front and rear with rear missing links, wheel base extended 14", diffs welded, some day a VNT.

TotalDiesel
Unregistered

 
04-03-2010, 09:38 PM #4
Thanks einor but thats not what im looking for. I need the metal piece for the exhaust manifold. Its about an inch and a half long, very much like the flex tubes on the egr. its a corrugated pipe. No one seems to be able to find one of these.

Thanks,

Jon
TotalDiesel
04-03-2010, 09:38 PM #4

Thanks einor but thats not what im looking for. I need the metal piece for the exhaust manifold. Its about an inch and a half long, very much like the flex tubes on the egr. its a corrugated pipe. No one seems to be able to find one of these.

Thanks,

Jon

Einar
GT2256V

118
04-04-2010, 07:46 AM #5
I think i Understood you correct, you need the plexi-pipe here, right?
[Image: om603xhaustmanifold.jpg]
Einar
04-04-2010, 07:46 AM #5

I think i Understood you correct, you need the plexi-pipe here, right?
[Image: om603xhaustmanifold.jpg]

TotalDiesel
Unregistered

 
04-04-2010, 08:18 PM #6
yes. that while assembly of the flex pipe, core, and clamps. i need those parts. can anyone help me find those. I need to get them ASAP!

Thanks alot,

Jon
TotalDiesel
04-04-2010, 08:18 PM #6

yes. that while assembly of the flex pipe, core, and clamps. i need those parts. can anyone help me find those. I need to get them ASAP!

Thanks alot,

Jon

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)