M103 w201 -> OM606 swap
M103 w201 -> OM606 swap
12-11-2019, 09:38 AM
#1
I have a M103 auto w201 that I want to swap.
What I know
-w124 mounts with stock w210 arms will bolt in after 10mm is shaved from the mounts
-vaccum cutoff
What I need to know
-will the front AC fan be adequate enough for cooling if wired to turn on at 85-90*C
-what rad hoses to use with my stock radiator
Where to pin the glow plug harness into the stock location (doing push button so I just need to know where it normally gets power)
Will the m103 p/s pump and a/c comp bolt to the om606
Thanks for the help
I'm in the US so it took years to source an OM606. Found one 1 mile from my house.
I have a M103 auto w201 that I want to swap.
What I know
-w124 mounts with stock w210 arms will bolt in after 10mm is shaved from the mounts
-vaccum cutoff
What I need to know
-will the front AC fan be adequate enough for cooling if wired to turn on at 85-90*C
-what rad hoses to use with my stock radiator
Where to pin the glow plug harness into the stock location (doing push button so I just need to know where it normally gets power)
Will the m103 p/s pump and a/c comp bolt to the om606
Thanks for the help
Messages In This Thread
M103 w201 -> OM606 swap - by keiffith - 12-11-2019, 09:38 AM
RE: M103 w201 -> OM606 swap - by Bigpanda16 - 12-14-2019, 10:37 PM
RE: M103 w201 -> OM606 swap - by benzguy - 12-17-2019, 03:14 PM
RE: M103 w201 -> OM606 swap - by benzguy - 12-17-2019, 06:57 PM
RE: M103 w201 -> OM606 swap - by Ace - 11-06-2021, 07:50 PM
RE: M103 w201 -> OM606 swap - by Steve77 - 11-07-2021, 05:29 AM
RE: M103 w201 -> OM606 swap - by Ace - 03-28-2022, 10:08 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)