holset balancing Q
holset balancing Q
09-05-2019, 09:16 AM
#1
Hi folks,
a few months ago i bought hx35w from one guy from Netherlands and this turbo had issue with leaking into exhaust housing.
I did check for all bearings and shims and rubber seals and everything else and with consulting one guy over the web, he said
that this parts are all ok. No visible marks on the shaft, no marks on the copper bearings but still this turbo leaks into the exhaust housing. Def it needs new bearings and seals...
now i have another question as i have found Melett parts are well designed and made with good quality i want to rebuild this turbo myself.
After searching the web i did come across a few guys that say Holsets are individually balanced and if in ok condition they dont require balancing?
i want to put new rebuild kit into my Holset and just to be shure it doesnt need balancing again, it was a cheap turbo and i dont want to spend 300-400 euro for balancing and rebuilding it.
Main question is it true that Holset have individually balanced parts (shaft, blades)
Cheers
Antonio
Hi folks,
a few months ago i bought hx35w from one guy from Netherlands and this turbo had issue with leaking into exhaust housing.
I did check for all bearings and shims and rubber seals and everything else and with consulting one guy over the web, he said
that this parts are all ok. No visible marks on the shaft, no marks on the copper bearings but still this turbo leaks into the exhaust housing. Def it needs new bearings and seals...
now i have another question as i have found Melett parts are well designed and made with good quality i want to rebuild this turbo myself.
After searching the web i did come across a few guys that say Holsets are individually balanced and if in ok condition they dont require balancing?
i want to put new rebuild kit into my Holset and just to be shure it doesnt need balancing again, it was a cheap turbo and i dont want to spend 300-400 euro for balancing and rebuilding it.
Main question is it true that Holset have individually balanced parts (shaft, blades)
Cheers
Antonio
Messages In This Thread
holset balancing Q - by Antonio - 09-05-2019, 09:16 AM
RE: holset balancing Q - by Mallinman - 09-05-2019, 04:56 PM
RE: holset balancing Q - by Antonio - 09-06-2019, 12:53 AM
RE: holset balancing Q - by Mallinman - 09-07-2019, 02:31 AM
RE: holset balancing Q - by Antonio - 09-07-2019, 04:09 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)