606N/A with 5-speed

STD Other Projects 606N/A with 5-speed

606N/A with 5-speed

View a Printable Version

0 Vote(s) - 0 Average

inkblotz

Thundering Turtle

47

03-11-2019, 05:42 AM #10

(02-13-2019, 01:06 PM)Petar 2000-2006 Sprinter CDI, part no for the kit should be Valeo 835013 AFAIK. You might need to grind down about 1mm from the crankshaft flange, but otherwise it is bolt on. Read this:
http://www.superturbodiesel.com/std/show...4#pid63534 Post no6
If you also have the SLK230 flywheel and clutch it would be quick and dirty version, it should handle the non turbo 606 just fine.

Thanks for the replies. I have found a DM flywheel form Italy that came out of a W124 car with a 606N/A motor. I also found a new clutch kit that is made for same set up.

Thanks again
Mark

Attached Files

Image(s)

1990 300GD SWB 463 Diesel W/ OM603A Turbo Diesel transplant

inkblotz

03-11-2019, 05:42 AM #10

(02-13-2019, 01:06 PM)Petar 2000-2006 Sprinter CDI, part no for the kit should be Valeo 835013 AFAIK. You might need to grind down about 1mm from the crankshaft flange, but otherwise it is bolt on. Read this:
http://www.superturbodiesel.com/std/show...4#pid63534 Post no6
If you also have the SLK230 flywheel and clutch it would be quick and dirty version, it should handle the non turbo 606 just fine.

Thanks for the replies. I have found a DM flywheel form Italy that came out of a W124 car with a 606N/A motor. I also found a new clutch kit that is made for same set up.

Thanks again
Mark

Attached Files

Image(s)

1990 300GD SWB 463 Diesel W/ OM603A Turbo Diesel transplant

View a Printable Version

0 Vote(s) - 0 Average

Messages In This Thread

606N/A with 5-speed - by inkblotz - 02-13-2019, 07:32 AM

RE: 606N/A with 5-speed - by Petar - 02-13-2019, 07:56 AM

RE: 606N/A with 5-speed - by inkblotz - 02-13-2019, 09:43 AM

RE: 606N/A with 5-speed - by Petar - 02-13-2019, 01:06 PM

RE: 606N/A with 5-speed - by inkblotz - 02-14-2019, 06:38 AM

RE: 606N/A with 5-speed - by benzguy - 02-14-2019, 12:41 PM

RE: 606N/A with 5-speed - by inkblotz - 02-15-2019, 07:15 AM

RE: 606N/A with 5-speed - by inkblotz - 02-16-2019, 07:08 AM

RE: 606N/A with 5-speed - by Petar - 02-16-2019, 08:57 AM

RE: 606N/A with 5-speed - by inkblotz - 03-11-2019, 05:42 AM

Users browsing this thread:
1 Guest(s)