OM606 into Sprinter
OM606 into Sprinter
01-30-2019, 06:40 AM
#1
I plan on using an unfacelifted sprinter, but may end up using a OM611 2.2 van. Does anybody know if the mounts are in the same place in these vans, and is the bellhousing pattern the same?
Many thanks, Jack
engineengineer
01-30-2019, 06:40 AM #1Hi all, planning on fitting an OM606 to a 903 Sprinter. I know an OM605 will bolt straight onto the mounts as it's essentially the same block as the 602, but wondered if anyone knew if the mounting points are the same distance from the bellhousing on the 606?
I plan on using an unfacelifted sprinter, but may end up using a OM611 2.2 van. Does anybody know if the mounts are in the same place in these vans, and is the bellhousing pattern the same?
Many thanks, Jack
Messages In This Thread
OM606 into Sprinter - by engineengineer - 01-30-2019, 06:40 AM
RE: OM606 into Sprinter - by barrote - 01-30-2019, 08:13 AM
RE: OM606 into Sprinter - by engineengineer - 01-30-2019, 05:48 PM
RE: OM606 into Sprinter - by engineengineer - 01-30-2019, 05:20 PM
RE: OM606 into Sprinter - by barrote - 02-01-2019, 05:11 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)