STD Other Open Question about a curious injector thingy...

Question about a curious injector thingy...

Question about a curious injector thingy...

 
  • 0 Vote(s) - 0 Average
 
Evgeniy1987
GT2256V

139
11-04-2016, 03:01 PM #1
Guys,

I have a question.

As you may read in my thread about the ELITE project, I found this thingy:

[Image: IMG_20161103_WA0024.jpg]

This thingy is usually used here, number 22:

[Image: Bosch+0445110021.png]


But then:

[Image: IMG_20161104_WA0005.jpg]

So I thought: naaah ... lets take the hydraulic press and push that out. But the shape is rather unexpected:

[Image: IMG_20161104_WA0017.jpg]

[Image: IMG_20161104_WA0009.jpg]


See ? The 6 notches do not touch, and are appreximately 3/4 of the length of the whole pin.

The obvious question is: What is this? And why ?

I can think of (major) flow restriction, and thus dampening of high-frequent pressure pulses...

Does somebody know?


Kind regards,

Evgeniy
This post was last modified: 11-04-2016, 03:03 PM by Evgeniy1987.
Evgeniy1987
11-04-2016, 03:01 PM #1

Guys,

I have a question.

As you may read in my thread about the ELITE project, I found this thingy:

[Image: IMG_20161103_WA0024.jpg]

This thingy is usually used here, number 22:

[Image: Bosch+0445110021.png]


But then:

[Image: IMG_20161104_WA0005.jpg]

So I thought: naaah ... lets take the hydraulic press and push that out. But the shape is rather unexpected:

[Image: IMG_20161104_WA0017.jpg]

[Image: IMG_20161104_WA0009.jpg]


See ? The 6 notches do not touch, and are appreximately 3/4 of the length of the whole pin.

The obvious question is: What is this? And why ?

I can think of (major) flow restriction, and thus dampening of high-frequent pressure pulses...

Does somebody know?


Kind regards,

Evgeniy

 
  • 0 Vote(s) - 0 Average

Messages In This Thread
Question about a curious injector thingy... - by Evgeniy1987 - 11-04-2016, 03:01 PM
RE: Question about a curious injector thingy... - by Evgeniy1987 - 11-04-2016, 03:24 PM
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)