Triangle om606 flange and t3 holset flange, adapter
Triangle om606 flange and t3 holset flange, adapter
02-04-2016, 01:23 PM
#1
I have 4 sets cut out.
Attached Files
Image(s)1999 S210 Edc pump. 7.5mm dieselmeken element.
HX35W turbo, custom map.
Brakes 330mm 4 piston brembo CL500, bolt on fit. Longer brake lines. 3mm spacers.
260km/h
2.1 boost for now.
16 inch steel wheels with 20mm spacers.
If you want to put holset or any turbo with t3 flange on an original om6060 exhaust manifold , with adapter inbetween. This flanges are for you. A set for 20 usd +cheap shopping all over the world
I have 4 sets cut out.
Attached Files
Image(s)1999 S210 Edc pump. 7.5mm dieselmeken element.
HX35W turbo, custom map.
Brakes 330mm 4 piston brembo CL500, bolt on fit. Longer brake lines. 3mm spacers.
260km/h
2.1 boost for now.
16 inch steel wheels with 20mm spacers.
Messages In This Thread
Triangle om606 flange and t3 holset flange, adapter - by erio - 02-04-2016, 01:23 PM
RE: Triangle om606 flange and t3 holset flange, adapter - by atypicalguy - 02-15-2016, 12:35 AM
RE: Triangle om606 flange and t3 holset flange, adapter - by erio - 02-15-2016, 01:25 AM
RE: Triangle om606 flange and t3 holset flange, adapter - by erio - 02-17-2016, 10:04 AM
RE: Triangle om606 flange and t3 holset flange, adapter - by Phil O' Dendron - 03-22-2016, 02:46 AM
RE: Triangle om606 flange and t3 holset flange, adapter - by atypicalguy - 03-22-2016, 05:28 AM
RE: Triangle om606 flange and t3 holset flange, adapter - by erio - 03-23-2016, 10:59 AM
RE: Triangle om606 flange and t3 holset flange, adapter - by Phil O' Dendron - 03-25-2016, 06:55 AM
RE: Triangle om606 flange and t3 holset flange, adapter - by erio - 10-24-2017, 04:11 AM
RE: Triangle om606 flange and t3 holset flange, adapter - by Hario' - 11-14-2017, 06:54 AM
RE: Triangle om606 flange and t3 holset flange, adapter - by GermanStar - 01-05-2019, 06:27 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)