STD Tuning Suspension Air Lift Chapman universal struts?

Air Lift Chapman universal struts?

Air Lift Chapman universal struts?

 
  • 0 Vote(s) - 0 Average
 
kestreltom
GT2256V

67
10-16-2015, 04:59 PM #1
I am thinking of retrofitting these to the rear on my '84 300D : https://bagriders.com/modlab/products/AI...TRUTS.html

I simply want to be able to adjust to different load conditions while maintaining an even stance, maybe even tow a small trailer. I have heard that the narrower sliding sleeve bags like these - are a little softer riding than the bellows-style bags. The bags above are rated for 750 lbs ea. @ 100 psi which is very close to the needed load range, maybe a bit low. I think the bags can handle pressures as high as 150 psi, but not sure yet...

Has anyone tried this?

1984 300D with Monark nozzles, GT2256V w/ Synkooppi/Arduino controller, W123 n/a intake, air/water intercooler, precup holes reamed, IP & valve timing = fac + 2 degrees, upgraded leather interior, 140A alternator, electric lift pump, 3" aluminum radiator w/ electric fan, HID headlight conversion, bilsteins, stock MW IP turned up 3 turns on tq module per OM616, 2.65 rear end, ventilated front rotors, dual rear swaybar mod + W116 springs  -  https://www.youtube.com/watch?v=4zPSyCMkkk0
kestreltom
10-16-2015, 04:59 PM #1

I am thinking of retrofitting these to the rear on my '84 300D : https://bagriders.com/modlab/products/AI...TRUTS.html

I simply want to be able to adjust to different load conditions while maintaining an even stance, maybe even tow a small trailer. I have heard that the narrower sliding sleeve bags like these - are a little softer riding than the bellows-style bags. The bags above are rated for 750 lbs ea. @ 100 psi which is very close to the needed load range, maybe a bit low. I think the bags can handle pressures as high as 150 psi, but not sure yet...

Has anyone tried this?


1984 300D with Monark nozzles, GT2256V w/ Synkooppi/Arduino controller, W123 n/a intake, air/water intercooler, precup holes reamed, IP & valve timing = fac + 2 degrees, upgraded leather interior, 140A alternator, electric lift pump, 3" aluminum radiator w/ electric fan, HID headlight conversion, bilsteins, stock MW IP turned up 3 turns on tq module per OM616, 2.65 rear end, ventilated front rotors, dual rear swaybar mod + W116 springs  -  https://www.youtube.com/watch?v=4zPSyCMkkk0

 
  • 0 Vote(s) - 0 Average

Messages In This Thread
Air Lift Chapman universal struts? - by kestreltom - 10-16-2015, 04:59 PM
RE: Air Lift Chapman universal struts? - by Tito - 10-17-2015, 11:29 AM
RE: Air Lift Chapman universal struts? - by kestreltom - 10-17-2015, 02:13 PM
RE: Air Lift Chapman universal struts? - by Eric78 - 10-17-2015, 04:58 PM
RE: Air Lift Chapman universal struts? - by kestreltom - 10-17-2015, 10:49 PM
RE: Air Lift Chapman universal struts? - by Tito - 10-18-2015, 12:17 AM
RE: Air Lift Chapman universal struts? - by kestreltom - 10-18-2015, 12:03 PM
RE: Air Lift Chapman universal struts? - by Tito - 10-19-2015, 03:31 AM
RE: Air Lift Chapman universal struts? - by kestreltom - 10-19-2015, 07:31 AM
RE: Air Lift Chapman universal struts? - by NZScott - 10-18-2015, 01:38 AM
RE: Air Lift Chapman universal struts? - by kestreltom - 10-18-2015, 12:01 PM
RE: Air Lift Chapman universal struts? - by NZScott - 10-19-2015, 03:14 AM
RE: Air Lift Chapman universal struts? - by Tito - 10-19-2015, 11:51 AM
RE: Air Lift Chapman universal struts? - by kestreltom - 10-19-2015, 03:45 PM
RE: Air Lift Chapman universal struts? - by Bigpanda16 - 01-16-2016, 10:29 AM
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)