AMG 6 pot calipers
AMG 6 pot calipers
Ok,
So I am doing a 6 pot AMG caliper swap on a w124 for a customer. Going to get some custom mounting brackets made to use the 345 mm rotors off of a 4pot AMG caliper c55 instead of the 360mm from the later clk and slk. This will make using these brakes a lot more economical. 125 a rotor vs 700 a rotor. I can run more sets and I am also looking to make a setup to reverse mount the calipers so there will be no fitment issues. I am going to move the bleeders to the other side and have a new crossover tube made for them.
Main question is would anyone be interested in the hardware to do this. I am looking at around 300.00 for the brackets and what ever the lines cost. I would assume another 100-200 depending on the setup and volume. They will still only fit under 18" wheels. This would still be cheaper than 1 rotor.