Norwegian OM606 build
Norwegian OM606 build
Hi guys,
I have posted a few photos of my project here in different treads.
But here I will post all my photos of my high hp OM606 build.
The engine started out as an .910 engine with a stock 5.5mm M pump, and some tweaking was done too it along the way.
The car I started with was an MB w201 2.0D 4-speed 1993 mod.
I drove it a while with the stock Om606.910 engine, it worked very well, but 136hp wasn`t enough
I fitted an Eaton m90 compressor and tuned the stock 5.5mm pump to max, and got out around 170ish hp (dyno papers will come)
This worked very well, and drove with this mod for almost 6monts!
But 170+hp wasn`t enough
So I bought an shorblock OM606.962 from Erling66 on this forum. This engine had 2 badly bent rods, and 1 minor bent rod. So i bought 6 H-profile rods from Sten Parner Motor form sweden. All gaskets, pistonrings+++ was bought. So lets get on with the pictures
Pictures from the first build: