STD Other Non MBZ Diesel 4 cyl perkins only firing on two cylinders at idle?

4 cyl perkins only firing on two cylinders at idle?

4 cyl perkins only firing on two cylinders at idle?

 
  • 0 Vote(s) - 0 Average
 
MFSuper90
Budget Builder

1,533
03-08-2016, 06:48 PM #11
Hansendlk, you were correct partially correct. Two valve were sunk into the head not seating correctly and the port job that was done had a pinhole in the intake side cause it to suck a tiny bit of coolant in the cylinder. And it had two bad injectors. I just got all this taken apart and check the past month or two lol.

It's changed some though, now it has a Bosch VE on it and I just fabbed up a Borg Warner s257sxe on it, waiting for my injectors to come back now...

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
03-08-2016, 06:48 PM #11

Hansendlk, you were correct partially correct. Two valve were sunk into the head not seating correctly and the port job that was done had a pinhole in the intake side cause it to suck a tiny bit of coolant in the cylinder. And it had two bad injectors. I just got all this taken apart and check the past month or two lol.

It's changed some though, now it has a Bosch VE on it and I just fabbed up a Borg Warner s257sxe on it, waiting for my injectors to come back now...


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

 
  • 0 Vote(s) - 0 Average

Messages In This Thread
4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 05-15-2011, 12:57 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by dieselboy - 05-15-2011, 06:30 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 05-15-2011, 07:45 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by HoleshotHolset - 05-16-2011, 09:28 AM
RE: 4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 05-16-2011, 01:56 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by Biohazard - 05-16-2011, 07:32 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 05-16-2011, 08:19 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by john - 01-11-2014, 09:16 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 01-13-2014, 08:41 PM
RE: 4 cyl perkins only firing on two cylinders at idle? - by hansendk - 01-15-2014, 07:35 AM
RE: 4 cyl perkins only firing on two cylinders at idle? - by MFSuper90 - 03-08-2016, 06:48 PM
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)