Well Ive been lurking around here for a while and have gotten lots of good info so Ive decided to share my project. Im swapping a OM617 turbo into a 94 toyota pickup. Heres some picks
I built an adapter to mate it to the toyota 5 speeed
New engine sitting in its home
It is VERY tight in the front
Heres where im currently at
Exhaust downpipe wrapped with fiberglass
For the throttle I used a lokar carb style adapter
Mercedes adapter to toyota oil pressure sending unit
Radiator fitment I used a volvo radiator
Had to use hood pins because I cut so much out to fit the radiator
Some random shots
And I just got these in the mail. Newly rebuild and pressure tested injectors with monark nozzles from mercedes source gotta love that place!
So thats where Im at as of now.
Heres what I have left on the to do list:
Hook up pyro, boost, oil temp, and water temp gauges
Finish wiring glow plug system
Cut notch out of oil pan for steering clearance
Purge the fuel system
Install new injectors and pre cup seal washers
And Im probably forgetting somthing. Should have more updates this weeknd