Horn performance
Horn performance
Everything is in and it works great!
It sounds better in person, audio is not my camera's strong point.
http://www.youtube.com/watch?v=eGBRO-xY1cY
A light on the cluster tells me when the pump is on and both the pump and horns can be switched off using a DPST switch on the center console.
I took the pressure switch off an old 2hp DeWalt compressor and enlarged the air passages between the ports. This switch lets me fine tune the on/off pressures and not cycle the main relay as often. I was hoping to set the pressure higher than 110psi but any more than that and the horn valve won't open!
It was a battle, and not one I'd look forward to repeating, but now that its installed I'm happy with the results.