STD Maintenance General Opinion regarding the turbo

Opinion regarding the turbo

Opinion regarding the turbo

 
  • 0 Vote(s) - 0 Average
 
miguelrocha
Naturally-aspirated

9
02-03-2020, 10:11 PM #1
Friends that turbo prefer for an Om605 pump 7.5 dieselmeken

- Borgwarner S200SXE S257
- Holset HX35 exhaust part 12cm 

Thanks
This post was last modified: 02-03-2020, 10:11 PM by miguelrocha.
miguelrocha
02-03-2020, 10:11 PM #1

Friends that turbo prefer for an Om605 pump 7.5 dieselmeken

- Borgwarner S200SXE S257
- Holset HX35 exhaust part 12cm 

Thanks

TwoMuchBoost
K26-2

25
02-04-2020, 09:25 AM #2
I have HX35 on a bigger 3.0 OM603 and it's laggy and smoky... moving to a S200SX 51mm with the tight 0.83 AR housing to get this train rolling. When you look at the compressor map of the S200, it supports enough airflow and pressure ratio to run 30-35psi of boost without running off the map. Any more airflow and you can just add an S400 on-top which is my eventual plan.
TwoMuchBoost
02-04-2020, 09:25 AM #2

I have HX35 on a bigger 3.0 OM603 and it's laggy and smoky... moving to a S200SX 51mm with the tight 0.83 AR housing to get this train rolling. When you look at the compressor map of the S200, it supports enough airflow and pressure ratio to run 30-35psi of boost without running off the map. Any more airflow and you can just add an S400 on-top which is my eventual plan.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)