+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Injector shim OM606A for pop adjustment (/showthread.php?tid=8401)
Injector shim OM606A for pop adjustment - TBMY - 09-07-2020
Hi!
I have been searching, but looks difficult to find...?
I need to adjust injector pop pressure for optimal operation with my new nozzles.
The shim is ca9,75mm outer diameter (ca3/8"), ca3mm inner diameter (ca1/8")...
Where to buy??
Help much appreciated!!
Tom
RE: Injector shim OM606A for pop adjustment - Anjay1 - 09-08-2020
injectionpumps.co.uk
RE: Injector shim OM606A for pop adjustment - TBMY - 09-08-2020
Thanks for tip!
But when trying to access web address I get this message from Trend Antivirus: "Warning! This website contains malware. Visiting this website may harm your computer!"
RE: Injector shim OM606A for pop adjustment - zeeman - 09-10-2020
TBMY Thanks for tip!It is in the USA but McMaster Carr has steel harden shims.
But when trying to access web address I get this message from Trend Antivirus: "Warning! This website contains malware. Visiting this website may harm your computer!"