STD
MW rack limiter - Printable Version

+- STD (http://www.superturbodiesel.com/std)
+-- Forum: Tuning (http://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (http://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: MW rack limiter (/showthread.php?tid=8314)



MW rack limiter - Kevy - 02-14-2020

I have a car with the rack limiter removed. For those with a 617a pump to measure, about what mm depth is the adjusting nut set at stock?


RE: MW rack limiter - Kevy - 03-04-2020

To clarify, I put the rack limiter back in.

I set it all the way adjusted in. Adjusted the torque control 3-1/2 turns CW, turned in the coarse idle 1/2 turn CW and the horizontal stop to about 1/4" from the nut.
The throttle is very touchy off idle but tapers off quick. It returns to idle and maintains idle perfect. EGT gets past 1300 at WOT. Think I'll turn back the rack 2 CCW.