Pre Chamber Special Tool - Printable Version +- STD (https://www.superturbodiesel.com/std) +-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6) +--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7) +--- Thread: Pre Chamber Special Tool (/showthread.php?tid=8186)

Pre Chamber Special Tool - German Diesel - 01-22-2019 Hi Guys, a few weeks ago, i have a damage on the cylinder head gaskit, the water goes to the outside... (OM602.939) so, to make it rigth, i want to put the Prechambers out, but the ring was thigt, very thigt. two Adapters from 1/2" to 3/4" crack. the thrid one hold. To never get this Problem, i build this tool: the Material is a 32mm Allen key and i have tournd and mill it.  it fit great, like the original from Stahlwille.  Steffen RE: Pre Chamber Special Tool - AlanMcR - 01-22-2019 Beautifully made! RE: Pre Chamber Special Tool - zeeman - 01-23-2019 Excellent machine work!     Zeeman RE: Pre Chamber Special Tool - German Diesel - 01-25-2019 Thank you, it was hard work (: RE: Pre Chamber Special Tool - Mallinman - 01-26-2019 Really nice clean work there bud.