+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Lack of low end torque (/showthread.php?tid=8088)
Lack of low end torque - Indo_G - 07-19-2018
Hi,
I've just done the OM606 with dieselpumpuk IP conversion into my 300GE. Car runs great however it lacks the low end torque. The boost will come at 3200-3500RPM and this when the car is really pulling. I've never had any experience with this set-up and just wondering whether this is the character? I also install 722.6xx transmission from a sedan and 33" tires. I doubt the gear ratio and big wheels have an affect on the slow initial acceleration. Can someone share some input how to improve low end torque?
Chris
RE: Lack of low end torque - polarisrmk - 07-19-2018
(07-19-2018, 01:41 AM)Indo_G Hi,Definitely get that exhaust opened up
I've just done the OM606 with dieselpumpuk IP conversion into my 300GE. Car runs great however it lacks the low end torque. The boost will come at 3200-3500RPM and this when the car is really pulling. I've never had any experience with this set-up and just wondering whether this is the character? I also install 722.6xx transmission from a sedan and 33" tires. I doubt the gear ratio and big wheels have an affect on the slow initial acceleration. Can someone share some input how to improve low end torque?
Chris
RE: Lack of low end torque - Fishman - 07-20-2018
What turbo do you have? You kan open the pump a little more.