STD
W210 300td hx35 on adapter , 27psi boost - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: Pics and Videos (https://www.superturbodiesel.com/std/forumdisplay.php?fid=12)
+--- Thread: W210 300td hx35 on adapter , 27psi boost (/showthread.php?tid=7453)



W210 300td hx35 on adapter , 27psi boost - erio - 10-05-2016

https://youtu.be/4IqtDNLPlm0

Youtube video of my car. 240km/h and the wind tried to kill me. 

1.9 bar. 
But the hose from boost valve fell off.


RE: W210 300td hx35 on adapter , 27psi boost - erio - 12-21-2016

(10-05-2016, 01:45 PM)erio https://youtu.be/4IqtDNLPlm0

Youtube video of my car. 240km/h and the wind tried to kill me. 

1.9 bar. 
But the hose from boost valve fell off.
Edit.
It was the intercooler hose 5mm hole(aluminium under turbo) 



RE: W210 300td hx35 on adapter , 27psi boost - hents99 - 12-22-2016

I made 200kmh with G class om606 with hx35 today....windshield almost hit my nose Smile


RE: W210 300td hx35 on adapter , 27psi boost - erio - 12-22-2016

(12-22-2016, 11:07 AM)hents99 I made 200kmh with G class om606 with hx35 today....windshield almost hit my nose Smile

you just have to love this feeling of following porsches cayens and panameras, and new bmw 7 series, where they just cannot escape Smile

My engine is now in a non rusted w210, and dieselmekens 7,5mm elements are already in the edc pump.
now my mechanics will put it in according to his instructions.
unfortunately pump was set on the bench not to 16 ATDC but 15 degrees. 
They still are uncertin how to put it in ... we will see. 
pump delivers 160ccm now.
On video it was a stock pump.


RE: W210 300td hx35 on adapter , 27psi boost - hents99 - 12-23-2016

W463 with OM606+HX35 pulls strong but you can feel those tons pushing through the wind. It`s good feeling because axle ratio is slow Smile
Like G55K vs all other 55K`s. G class acceleration emotion is always greater. Even speed isn`t that much as it feels Smile


Hope to see the results with 7.5mm elements in EDC pump soon. Smile