+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Resetting 7.5mm M-pump (/showthread.php?tid=7110)
Resetting 7.5mm M-pump - scrubs - 03-22-2016
Hi, I'd like to know if there is a way to reset the external ALDA on a M-pump,
I started adjusting and didn't count mark where the original settings of the threaded rods was.
RE: Resetting 7.5mm M-pump - 50harleyrider - 03-22-2016
(03-22-2016, 01:04 AM)scrubs Hi, I'd like to know if there is a way to reset the external ALDA on a M-pump,Is it a Dieselmeken pump? If so send him an email or check utube. He's posted some videos on there for timing the pump. Maybe he has for alda adjustment too.Mine has paint on the threads so if you threaded it out, you should be able to see the original location. If you threaded it in-oh well.
I started adjusting and didn't count mark where the original settings of the threaded rods was.
RE: Resetting 7.5mm M-pump - scrubs - 03-22-2016
Thanks, will look again for both