+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9)
+--- Thread: OM606 (/showthread.php?tid=6956)
OM606 - martinst94 - 01-05-2016
Hello,
I have one question . From several years I drive w210 with e300td, the car is about 240hp, my question is what flywheel to use for manual gearbox???
Congratulations from Bulgaria !
RE: OM606 - soltysrsz - 01-07-2016
Hi, it depend which gearbox do you want to use. In my case i use 717.450 and i need to use dual mass flywheel so i mounted 2.2 cdi valeo kit which convert dual mass to single mass.
RE: OM606 - swampmonkey - 01-08-2016
(01-07-2016, 07:52 AM)soltysrsz Hi, it depend which gearbox do you want to use. In my case i use 717.450 and i need to use dual mass flywheel so i mounted 2.2 cdi valeo kit which convert dual mass to single mass.
looking for that flywheel thingy to, got a link where i can find it?
so i buy the right stuff.
did you modify it to fit a larger pressureplate like the sachs765 and sinterclutch? no problem?
RE: OM606 - soltysrsz - 01-08-2016
(01-08-2016, 02:54 AM)swampmonkey(01-07-2016, 07:52 AM)soltysrsz Hi, it depend which gearbox do you want to use. In my case i use 717.450 and i need to use dual mass flywheel so i mounted 2.2 cdi valeo kit which convert dual mass to single mass.
looking for that flywheel thingy to, got a link where i can find it?
so i buy the right stuff.
did you modify it to fit a larger pressureplate like the sachs765 and sinterclutch? no problem?
this setup i bought from one guy which was selling 2,2 cdi engine. I didn't modify it. I'm looking for sachs 765 and i will modify flywheel.
RE: OM606 - martinst94 - 01-20-2016
Hi,i want to use the gearbox and flywheel from e270cdi (w210).Is it possible that intervention?
Please helpp
RE: OM606 - soltysrsz - 01-22-2016
I don't know, but if e270cdi is in line engine it should work. What about flywheel i don't know.