+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Borg Warners Experience? (/showthread.php?tid=6769)
Borg Warners Experience? - fire-host - 09-27-2015
Hi All,
Has anyone had much experience with Borg Warners on their 606's?
Looking at running a 7.5mm/8mm pump and looking for something that kicks in nice and low and gives anything around 450bhp?
Have seen various mentioned including S200, S300 but also been reading up on the newer EFR range (as well as the 200/300SX-E's).
Who's given these a go then and with what result?
RE: Borg Warners Experience? - Keino - 09-27-2015
(09-27-2015, 12:09 PM)fire-host Hi All,
Has anyone had much experience with Borg Warners on their 606's?
Looking at running a 7.5mm/8mm pump and looking for something that kicks in nice and low and gives anything around 450bhp?
Have seen various mentioned including S200, S300 but also been reading up on the newer EFR range (as well as the 200/300SX-E's).
Who's given these a go then and with what result?
Im using a s200 on my 617 engine. Starts spooling around 1700-1800rpm with my 7.5mm pump
Feels like it has alot to give. I like it
RE: Borg Warners Experience? - fire-host - 09-27-2015
Nice! What size wheels do you run?
Have you ever stuck it on a dyno to see the results
?
RE: Borg Warners Experience? - Keino - 09-27-2015
(09-27-2015, 01:50 PM)fire-host Nice! What size wheels do you run?
Have you ever stuck it on a dyno to see the results
Sorry don't know the sizes just now. Measured before I mounted it and didn't write it down.....
However A/R on the exhaust was 0.73 I think.
No Dyno, but its more than 200hp in my own guessing.
