STD
New member! - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: Open (https://www.superturbodiesel.com/std/forumdisplay.php?fid=13)
+--- Thread: New member! (/showthread.php?tid=6490)



New member! - m1tch - 05-07-2015

Hi all,

I am new on here, I have been posting up on another forum prior to this, I am in the UK and have a Mercedes '98 W210 E300 Turbodiesel Estate - its got the OM606.962 engine coupled to the 722.6 transmission.

I am planning to use the car as a sleeper and am going to be running 1/4 mile times in it, initially as bone stock, then used as a test bed for various mods starting with simple intake and exhaust mods to see what the difference in drag times are.

I will start a project thread soon but I thought I would say hi!


RE: New member! - Hario' - 09-14-2015

Hello Tongue


RE: New member! - 97e300 - 09-15-2015

Welcome! I've been following your thread there and can tell you this forum is an invaluable resource for mercedes diesel tuning. I've got a 98 W210 chipped through speedtuning as well as resistor mod on the IP circuit.