STD
First post, so.... hello! - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: Open (https://www.superturbodiesel.com/std/forumdisplay.php?fid=13)
+--- Thread: First post, so.... hello! (/showthread.php?tid=6321)



First post, so.... hello! - whitey1986 - 03-07-2015

Hi all my name is Martyn but most people call me whitey. I am very interested in om60x engines due to their phenomenal strength and feel I really need to own one so I am here to pick up as much information as possible and hopefully contribute too eventually. Thanks for now!


RE: First post, so.... hello! - MFSuper90 - 03-07-2015

Welcome! They are pretty awesome machines


RE: First post, so.... hello! - whitey1986 - 03-07-2015

Just trying to get the money together and find the right engine in manual would quite love an estate too!


RE: First post, so.... hello! - hooblah - 03-08-2015

You won't find one with a manual box!


RE: First post, so.... hello! - whitey1986 - 03-11-2015

Yeah I know all 3l are automatic but some 2.5l are manual so thats my aim and then tune that or get the 3l onto the manual box! :-)


RE: First post, so.... hello! - cho - 03-13-2015

(03-08-2015, 02:56 PM)hooblah You won't find one with a manual box!

603 with 5 speed?  Plenty of those around.....

.


RE: First post, so.... hello! - benzguy - 03-13-2015

You are right Cho I own two


RE: First post, so.... hello! - Booster - 03-21-2015

(03-08-2015, 02:56 PM)hooblah You won't find one with a manual box!


The w202 om605 came in manual....

He is in the UK remember


RE: First post, so.... hello! - whitey1986 - 04-13-2015

Well if it doesn't fall through then I have bought a 325 tds estate from the ebay. Hopefully to pick up on Saturday morning. It already has an endtuning eeprom chip running approximately 175 bhp but obviously that's not enough. Now should I go ahead with bigger pump turbo clutch etc on this engine aim for 300 or 400 hp or attempt om606 conversion considering I have limited tooling. I do like the om606 idea but I also like things that are not too far out of reach. Suggestions tips pointers etc are greatly appreciated!