+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9)
+--- Thread: Differential (/showthread.php?tid=6149)
Pages:
1
2
RE: Differential - F.R.A.S - 01-28-2015
So a lower gear sits closer to the center??? Machine those millimeters or schim it if it's the other way around in other words. Sounds to easy...
(01-27-2015, 06:08 PM)raysorenson The flange that the ring gear bolts to has different spacing L to R.
RE: Differential - erx - 01-28-2015
Differences are about 10mm and there isn't much to machine. 3.07 ASD on left and 2.65 opened on right.
![[Image: IMG_5011_zpsaff0f7ca.jpg]](http://s236.photobucket.com/user/erx000/media/Mercedes/IMG_5011_zpsaff0f7ca.jpg.html)
RE: Differential - swampmonkey - 01-28-2015
(01-28-2015, 03:24 PM)erx Differences are about 10mm and there isn't much to machine. 3.07 ASD on left and 2.65 opened on right.
that 2.65 looks like it has seen better days huh? how did that happen?
RE: Differential - erx - 01-29-2015
(01-28-2015, 06:43 PM)swampmonkey(01-28-2015, 03:24 PM)erx Differences are about 10mm and there isn't much to machine. 3.07 ASD on left and 2.65 opened on right.
http://i236.photobucket.com/albums/ff209/erx000/Mercedes/IMG_5011_zpsaff0f7ca.jpg
that 2.65 looks like it has seen better days huh? how did that happen?
I bought them few years ago as they are, 2.65 was dry because front seal was leaking but I don't understand how that pin is so worn-out.
Because 2.65 ASD is hard to find I bought 3.07 ASD and I was planning to swap the internals but then I realized that there's different offset.
RE: Differential - F.R.A.S - 01-29-2015
Such awesome info, I love you guys
Can you put then bearing down on a flat surface and measure both and post the numbers???
(01-28-2015, 03:24 PM)erx Differences are about 10mm and there isn't much to machine. 3.07 ASD on left and 2.65 opened on right.
RE: Differential - Matej - 02-12-2015
Hello gentlemen,
What is the best W201/W204 differential (strength and ratio-wise) for an OM60x swap? It will be getting welded solid, so I am only interested in open differentials.
The car will be used for occasional drift events, but I would also like to be able to drive on the highway at reasonable RPM's.
RE: Differential - swampmonkey - 02-13-2015
(02-12-2015, 11:10 PM)Matej Hello gentlemen,
What is the best W201/W204 differential (strength and ratio-wise) for an OM60x swap? It will be getting welded solid, so I am only interested in open differentials.
The car will be used for occasional drift events, but I would also like to be able to drive on the highway at reasonable RPM's.
depends on the gearbox... a 1:1 a 2.65 might be pretty awsome (from 300tdt and others) , a 0.8 in fifth might be good with a 3.07diff
RE: Differential - raysorenson - 02-13-2015
Weight of the vehicle is almost as important and projected power output.
RE: Differential - Austincarnut - 05-03-2017
Has anyone made any progress with this subject?