+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: om603 6mm ip+ vnt turbo (/showthread.php?tid=6037)
om603 6mm ip+ vnt turbo - PedroFerreira - 12-08-2014
hey,im planing to put a 1749vb (1.9tdi 150hp) in my om603 whith 6mm pump...can i reach 180/190hp (1.7bar) whith that turbo?
sorry for my bad inglish
thks
can someone help me?
RE: om603 6mm ip+ vnt turbo - PedroFerreira - 12-08-2014
someone can help?
RE: om603 6mm ip+ vnt turbo - EDH_Performance - 12-08-2014
(12-08-2014, 07:48 PM)PedroFerreira someone can help?
No good
Sorrry, but stock turbo is something like gt20 or bigger
RE: om603 6mm ip+ vnt turbo - PedroFerreira - 12-08-2014
the stock turbo is kkk24
RE: om603 6mm ip+ vnt turbo - EDH_Performance - 12-09-2014
(12-08-2014, 08:08 PM)PedroFerreira the stock turbo is kkk24
Okey, the k24 is much bigger than the gt1749? so why change to a smaller one?
RE: om603 6mm ip+ vnt turbo - barrote - 12-09-2014
Boas,
i´m running a gt2359, and i think is small .
i´have a 2259 for sale , if u´re interested, this one will give u 1.7 what i dont think u can reach withr thre 17.
regards
RE: om603 6mm ip+ vnt turbo - starynovy - 12-09-2014
Tried 1749V on my M51 just for fun.. it boosted 0.2Bar in idle. One WOT and it would surge and fall apart. I have been runin 2256V at some 200-ish PS for two years with no probs, but common rail engine from which it originated is compledely different animal and it simply chokes prechamber one to death, 2 valves per cylinder did not helped either. Without proper vanes control prepare for 1-2Litres per 100km more. Just as Barrote said, its too small and I get pull from some 1300RPM but its dead at 3600 just like any other direct injected diesel with these turbos.
RE: om603 6mm ip+ vnt turbo - PedroFerreira - 12-09-2014
im interested in the kkk14 of the om606,can this turbo reach 200hp with 6mm ip and intercooler in my engine? dont have many people in portugal tuning that engine loool
RE: om603 6mm ip+ vnt turbo - EDH_Performance - 12-09-2014
(12-09-2014, 06:31 PM)PedroFerreira im interested in the kkk14 of the om606,can this turbo reach 200hp with 6mm ip and intercooler in my engine? dont have many people in portugal tuning that engine loool
Why not find a t3 turbo that is bigger than the k24 turbo? The k14 has a tiny exhaust side, and vacum controller as wg...Not ideal what so over for a 603
RE: om603 6mm ip+ vnt turbo - PedroFerreira - 12-09-2014
some people say that turbo can produce +200cv in my motor,isn´t true?
RE: om603 6mm ip+ vnt turbo - barrote - 12-10-2014
no buddy, that turbo will do any good, max u can have is a 603 behaving like a stock 606.
truth has to be said.
RE: om603 6mm ip+ vnt turbo - PedroFerreira - 12-11-2014
gt2359v is good for +200hp?
RE: om603 6mm ip+ vnt turbo - uli124125 - 12-13-2014
hi
i think you can get 200PS with the originale KKK24
im drinving this fuxxing old piece of metalwork on my om605 2.5 litre with roundabout 190 hp
and my highest Exhast gas Temp is ca 720 in summer with ca 30°celsius with a big trailer in back of the car with ca 3 tons by climbing up a 12% hill
what means that the car is working like hell
RE: om603 6mm ip+ vnt turbo - offroaddieselhu - 12-15-2014
(12-08-2014, 06:13 PM)PedroFerreira hey,im planing to put a 1749vb (1.9tdi 150hp) in my om603 whith 6mm pump...can i reach 180/190hp (1.7bar) whith that turbo?
sorry for my bad inglish
thks
can someone help me?
This turbo is good for three cylinder and for the other three cylinder you sholud put an other one. (if you find in the store)
Offroaddieselhu