+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: 617 into 190D (/showthread.php?tid=581)
617 into 190D - IsaacDW - 08-05-2009
I have found a potentially good deal on craigslist for a 1986 190D. From what I can find, the OM602 that is in the 190D is naturally aspirated.
Since I have a "spare" 617 turbo, would an engine swap into the 201 chassis be feasible. The 190D has the five speed manual, which would be my main reason for the swap.
I have absolutely NO idea if anything would fit. Has anyone done or thought about doing this swap before? I just want to explore the possibility. What do you think?
RE: 617 into 190D - ForcedInduction - 08-05-2009
Its possible but you would need to make adapters for the engine mounts and that 5-speed will not attach to the engine.
There is also the legality issue of putting an older engine into a newer body, some states might not let you register the car.
RE: 617 into 190D - IsaacDW - 08-05-2009
That sounds like it would be far more hassle than it worth. Thanks!
RE: 617 into 190D - totaldisaster - 08-05-2009
Personally, you are downgrading that car by dropping the 617 in there.
Even if you shoe it in there, your weight distribution is gunna suck. I wouldn't be surprised if the handling becomes sloppy with that anchor up in the front too.
...just thoughts..
RE: 617 into 190D - willbhere4u - 08-05-2009
You can get an om606 om603 should bolt up in there the 6 cly diesel and work with that transmission! but they are hard to find for a reasonable price
RE: 617 into 190D - 2.5-10 - 08-06-2009
I have contemplated a 616-4speed swap in my spare 190 chassis, it looks pretty easy if you have the transmission from the 617, but yes It will not bolt up to the 5-speed because of a certain starter bung.