STD
WTB w116 / 300sd bell housing - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8)
+--- Thread: WTB w116 / 300sd bell housing (/showthread.php?tid=5689)



WTB w116 / 300sd bell housing - Austincarnut - 06-27-2014

I need a w116 300SD bell housing from an auto transmission
any idea where I may find one? Also a OM616 car w/ auto trans and detachable bell housing would work as well, thank you


RE: WTB w116 / 300sd bell housing - sassparilla_kid - 06-27-2014

I'm pretty certain all the automatics mated to 616/7 engines are pretty much the same. Also, not sure if any have removable bell housings


RE: WTB w116 / 300sd bell housing - DeliveryValve - 06-27-2014

I got a 722.118 that I can take the bellhousing. Pm me and make me an offer.


RE: WTB w116 / 300sd bell housing - Austincarnut - 06-27-2014

I am certain the '79 300sd has what I need, also some 617's and 616's w/ earlier autos had a similar arrangement


(06-27-2014, 09:41 AM)sassparilla_kid I'm pretty certain all the automatics mated to 616/7 engines are pretty much the same. Also, not sure if any have removable bell housings



RE: WTB w116 / 300sd bell housing - DiseaselWeasel - 06-27-2014

722.1## has Smile


RE: WTB w116 / 300sd bell housing - Austincarnut - 06-27-2014

http://www.google.com/imgres?imgurl=https%3A%2F%2Flh5.googleusercontent.com%2F_QRWdX16W3c0%2FTcXK2tZl0lI%2FAAAAAAAACLM%2FyOtl6TSZ6g8%2Fs800%2F1980300sd74.jpg&imgrefurl=http%3A%2F%2Fforum.w116.org%2Ftest-drive%2Fmy-custom-1980-300sd-project%2F105%2F&h=600&w=800&tbnid=lxKfudCWSvCTzM%3A&zoom=1&docid=jugx9uH3GCNHyM&ei=Hs6tU8u-N86TqAaltoDQAg&tbm=isch&ved=0CFEQMygqMCo&iact=rc&uact=3&dur=337&page=3&start=38&ndsp=20


RE: WTB w116 / 300sd bell housing - DeliveryValve - 06-27-2014

722.118 furthest away and 722.112 near.
Pic taken from stretch..
[Image: 93517d1309619129-advice-reqd-shaft-splin...sions1.jpg]


RE: WTB w116 / 300sd bell housing - DeliveryValve - 06-28-2014

Pictures of the .118 bell