+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Suspension (https://www.superturbodiesel.com/std/forumdisplay.php?fid=5)
+--- Thread: DIY Rear camber 201/124/129 etc (/showthread.php?tid=5610)
DIY Rear camber 201/124/129 etc - winmutt - 05-21-2014
Quote:Speedway Forged Steel 4-Bar Rod Ends, 5/8-18 RH Thread 11 Degree ShankStolen from : http://forum.190rev.net/showthread.php?37134-DIY-adjustable-rear-camber-arms&highlight=camber+arm
91008001-11
STYLE: 11
Update CartUpdateDelete ItemDelete $14.99 $29.98 In Stock
Speedway Forged Steel 4-Bar Rod End, 5/8-18 LH Thread, Straight Shank
91008002
Update CartUpdateDelete ItemDelete $14.99 $29.98 In Stock
Steel Jam Nut, 5/8-18 RH
1750246
Update CartUpdateDelete ItemDelete $0.99 $1.98 In Stock
Steel Jam Nut, 5/8-18 LH
1750446
Update CartUpdateDelete ItemDelete $0.99 $1.98 In Stock
M&W Aluminum Tie Rod Sleeve, 7/8 O.D., 9 Inch Long
91034158-9
LENGTH: 9
Update CartUpdateDelete ItemDelete $8.99 $17.98 In Stock
I was looking on ebay and found this same DIY selling for 2x the cost. Speedway.com has everything you need for ~$80
RE: DIY Rear camber 201/124/129 etc - 97e300 - 05-24-2014
Had these on my w210 for at least 30k miles and they didn't explode