+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: intake manifold (/showthread.php?tid=56)
intake manifold - oel_brenner - 09-27-2008
it seems everybody who fits an intercooler to the OM603
basically blocks off the square hole where the charge pipe bolted up
then cuts a hole in the opposite side of the plenum
and weld in a section of aluminum pipe or tube.. pretty simple to do..
![[Image: OM603mod_intake.sized.jpg]](http://www.coastalboatsales.com/jfraley/gallery/albums/SL300D/OM603mod_intake.sized.jpg)
but what about using the normally aspirated intake manifold for the OM603 ?
they are not very plentiful here in the states, and one would have to build a pressure capable plunum to replace the air filter box..
![[Image: dieselmanifold002.jpg]](http://www.coastalboatsales.com/jfraley/gallery/albums/SL300D/dieselmanifold002.jpg)
but then with all that work in making a plenum I could just make one from scratch
not unlike this one:
![[Image: supraintake1.jpg]](http://www.rossmachineracing.com/images/intakes/supraintake1.jpg)
thoughts ??
Re: intake manifold - oel_brenner - 09-27-2008
looks like all the injector lines are routed/bent in a different way..
adds even more work as they all have to be changed
maybe not such a good idea
Re: intake manifold - ForcedInduction - 09-29-2008
oel_brenner but what about using the normally aspirated intake manifold for the OM603 ?
they are not very plentiful here in the states, and one would have to build a pressure capable plunum to replace the air filter box..
Its been done. From the dieselboost_demo video.
[attachment=0]<!-- ia0 -->DBD2.jpg<!-- ia0 -->[/attachment]
[attachment=1]<!-- ia1 -->DBD1.jpg<!-- ia1 -->[/attachment]