+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: holset he221 (/showthread.php?tid=4169)
holset he221 - MFSuper90 - 12-10-2012
So I am thinking about turbos for my car, because my little stock charger is starting to get some excessive play in it.
I ran across a good deal on a he221 and was wondering what yall think about running one. I believe they have a T25 flange, which would probably be a pain, but is doable.
These chargers are similiar to a hx27 i believe. Is it too small?
RE: holset he221 - led-panzer - 12-10-2012
It's exactly the same as the hx27, however it has a billet aluminum compressor wheel. It's an excellent turbo if you're keeping the stock pump
RE: holset he221 - MFSuper90 - 12-11-2012
(12-10-2012, 08:52 PM)led-panzer It's exactly the same as the hx27, however it has a billet aluminum compressor wheel. It's an excellent turbo if you're keeping the stock pump
yeah, I am not planning on doing a myna pump or anything, just a turned up stock pump.
How hard do you think it will be to adapt it to my manifold?
RE: holset he221 - w123love - 12-11-2012
http://mercedesforum.com/forum/diesel-performance-49/forcedinductions-holset-he221-turbo-50458/
This should have the info you need to know for the he221. From the 2.5 to the T3 doesn’t seem that hard.
RE: holset he221 - MFSuper90 - 12-11-2012
(12-11-2012, 11:47 AM)w123love http://mercedesforum.com/forum/diesel-performance-49/forcedinductions-holset-he221-turbo-50458/
This should have the info you need to know for the he221. From the 2.5 to the T3 doesn’t seem that hard.
I did some research and found that earlier this morning, and I am with you, sound pretty easy!
RE: holset he221 - led-panzer - 12-11-2012
The adaptor is cake. The more difficult part is the oil feed and drain and connecting it to the intake manifold. But even those aren't that hard.
RE: holset he221 - MFSuper90 - 12-11-2012
(12-11-2012, 06:43 PM)led-panzer The adaptor is cake. The more difficult part is the oil feed and drain and connecting it to the intake manifold. But even those aren't that hard.
After looking into it I agree. I have a W115 intake for my car also, so a couple silicone boots and maybe a little pipe,it should be golden.
Hopefully I score this turbo, that would be sweet
RE: holset he221 - MFSuper90 - 12-17-2012
Son of a B****
The bidding ended sooner than I thought and someone got for $5 more than my bid. I am not very happy
RE: holset he221 - led-panzer - 12-17-2012
Ah shit, I was hoping you were the high bidder. Gotta put the max bid higher next time.
Really sucks man that was a great deal for someone
RE: holset he221 - EDH_Performance - 12-17-2012
I am going to mount one of these with 6cm exhaust housing and billet compwheel on a isuzu 3.1TD 4 cyl engine and 11mm ve-pump
The billet compwheel is made to run at 2.8bars on the engine it was original mounted on!
RE: holset he221 - MFSuper90 - 12-18-2012
Yeah I know it. I thought it ended during my lunch break, but ended sooner than I thought, oh well shit happens.
And that sounds cool!
RE: holset he221 - led-panzer - 12-22-2012
There's another one on ebay right now, brand new, buy it now is 400.
RE: holset he221 - MFSuper90 - 12-22-2012
(12-22-2012, 12:50 PM)led-panzer There's another one on ebay right now, brand new, buy it now is 400.
Just put a offer on it (I'm a tight ass), got back on a couple hours later and someone bought it. Sometimes I should just spend a little money...
RE: holset he221 - EDH_Performance - 01-30-2013
I just mounted one of these HE221W with billet wheel and 7cm housing on my BMW 318TDS (1665ccm IDI diesel engine), And have full boost at 3100rpm! Works really great, and this is a really good quality turbo
RE: holset he221 - MFSuper90 - 01-30-2013
(01-30-2013, 07:58 PM)EDH_Performance I just mounted one of these HE221W with billet wheel and 7cm housing on my BMW 318TDS (1665ccm IDI diesel engine), And have full boost at 3100rpm! Works really great, and this is a really good quality turbo
I wish I would have grabbed one of them, but I ended up getting a good deal on a hx30 with the 6cm housing, so we will see how it works on a 617