STD
Body Molding Removal - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Body Mods (https://www.superturbodiesel.com/std/forumdisplay.php?fid=21)
+--- Thread: Body Molding Removal (/showthread.php?tid=2825)

Body Molding Removal - Oil Burner - 07-29-2011

HelpHuh...I need to remove the molding above the windows...the rain gutters on my 80 300 CD I can not for the life of me figure out how to remove these. I have tried everything I know and nothing works. Need to remove to paint car correctly!

Thanks for an help...Hope I am putting this in the correct thread

RE: Body Molding Removal - winmutt - 07-29-2011

The FSM covers it. Basically take a plastic trim tool and a rubber mallet and knock it upwards. To install use a 2x4 and the mallet. Pretty straight forward. Work from rear to front IIRC.

RE: Body Molding Removal - Oil Burner - 07-29-2011

(07-29-2011, 10:32 AM)winmutt The FSM covers it. Basically take a plastic trim tool and a rubber mallet and knock it upwards. To install use a 2x4 and the mallet. Pretty straight forward. Work from rear to front IIRC.

Thanks will try that tonight. LOST my FSM in a computer that was stolen, that was expnesive and I need to buy again Angry

RE: Body Molding Removal - Oil Burner - 01-05-2012

I am still having problems removing the molding around the rear window on my coupe I have taken pictures please help. I cant remove the felt that guides the window up and the inner chrome strip I need those off first before I can remove the chrome around the rain gutter I know this cause I can see screws coming up behind the gutter please help here is some picks of the problem area....please helpHuhAngryHuhAngryHuh

[Image: 2f81d291.jpg]

[Image: c4241847.jpg]