+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Oil filter pressure hole (/showthread.php?tid=2632)
Oil filter pressure hole - cjcosta - 05-18-2011
Hello everyone,
Anyone knows the tread dimension of the oil pressure hole in the OM617A
I want to install a gauge beacause w460 only have the warning ligth.
Best Regards,
Carlos
RE: Oil filter pressure hole - 4rnnr33 - 05-18-2011
(05-18-2011, 11:25 AM)cjcosta Hello everyone,
Anyone knows the tread dimension of the oil pressure hole in the OM617A
I want to install a gauge beacause w460 only have the warning ligth.
Best Regards,
Carlos
If you are talking about the hole in the back of the housing next to the turbo feed i believe it is m12x1.5
RE: Oil filter pressure hole - cjcosta - 05-19-2011
(05-18-2011, 01:05 PM)4rnnr33(05-18-2011, 11:25 AM)cjcosta Hello everyone,
Anyone knows the tread dimension of the oil pressure hole in the OM617A
I want to install a gauge beacause w460 only have the warning ligth.
Best Regards,
Carlos
If you are talking about the hole in the back of the housing next to the turbo feed i believe it is m12x1.5
No, its the lateral hole the one with a hose to feed the original dash gauge.
Best Regards,
Carlos
RE: Oil filter pressure hole - cjcosta - 05-23-2011
M12x1.5mm
Best Regards,
Carlos